হাইড্রোফিলিক অ্যালুমিনিয়াম ফয়েল অ্যালুমিনিয়াম ফয়েলের পৃষ্ঠকে হাইড্রোফিলিক আবরণ দিয়ে আবরণ করে প্রাপ্ত হয়, উদ্দেশ্য হাইড্রোফিলিক উন্নত করা (জল-আকর্ষক) অ্যালুমিনিয়াম ফয়েল কর্মক্ষমতা, এবং এটি উচ্চ তাপ স্থানান্তর দক্ষতা এবং জারা প্রতিরোধের আছে.
Hydrophilic Aluminum Foil is a specialized type of aluminum foil that has undergone a surface treatment to enhance its hydrophilic (জল-আকর্ষক) properties.
Hydrophilic Aluminum Foil is commonly used in various applications where efficient heat transfer and moisture management are required. The hydrophilic coating applied to the foil’s surface allows it to rapidly and uniformly distribute condensation or liquid, facilitating better heat exchange in heat exchangers, air conditioning systems, and radiators.
খাদ | মেজাজ | পুরুত্ব(মিমি) | প্রসার্য শক্তি(MPA) | Elogation At 50mm Interval(%) | Cup I.E,মিমি |
1100 3102 8011 |
ও | 0.08-0.20 | 80-110 | ≥20 | ≥6.0 |
H22 | 0.08-0.20 | 100-130 | ≥18 | ≥6.5 | |
H24 | 0.08-0.20 | 115-145 | ≥16 | ≥6.0 | |
H26 | 0.08-0.20 | 135-165 | ≥10 | ≥5.5 | |
H18 | 0.08-0.20 | ≥160 | ≥6 | - |
নোট: As the raw material of hydrophilic foil, 8011 অ্যালুমিনিয়াম ফয়েল is the most common alloy
INNER DIAMETER | 76/152মিমি. |
Thickness And Thickness Tolerance : | |
পুরুত্ব(মিমি) | পুরুত্ব সহনশীলতা |
0.080 | ±0.005 |
> 0.115-0.130 | ±0.008 |
> 0.130-0.32 | ±0.010 |
Width And Tolerance : | |
প্রস্থ(মিমি) | প্রস্থ সহনশীলতা |
≤500 | ±0.005 |
> 0.115-0.130 | ±0.008 |
> 0.130-0.32 | ±0.010 |
REEL : | |
প্রস্থ(মিমি) | প্রস্থ সহনশীলতা |
≤1400 | +2.0,0 |
Telescopic And Layer : | |
Telescopicy: 5মিমি | Layer: 0.5মিমি |
নোট: Hydrophilic aluminum foil is available in jumbo rolls, there is a certain relationship between tolerance and size.
আইটেম | Inspection Methods | Technical Requirements | |
Film (Double Surface) |
Weighing | Anti-Corrosion:1.6—2.0G/M2
Hydrophilic:0.4-0.7G/M2 |
|
Adhesion | Cup Test:5মিমি | No De-Laying | |
Jis4001 Network Test(100/100) | No Peeling | ||
T Test(180 Degree) | No De-Laying | ||
Hydrophilic | Initial Phase | Coating Status | ®≤5C |
Continuous Test Phase | Dipping 100 Hours In Flow Water (300 L/H),Drying For 2 এইচ, Then Test | Humidity100%:®≤20C | |
Dry Cycle 300 Times | Humidity 100%:®≤28c | ||
Dipping Into Volatilizing Solvant For 5min. And Drying It In Temperature 150 Degree, Then Dipping Into Flow Water For 5min. Then Drying In Oven Of Temperature 150 Degree For 150 Degree, Then Test It | Humidity 100%:®≤28C | ||
Anti-Corrosion | Jisz2371 Nutual Salt Spray Test(72 এইচ) | R.NO.≥9.8 | |
Anti-Alikalinity | Sample Dip For 3min In 20% Naoh For 20 C+/-1 C | No Changing | |
Anti-Hot | In 200+/-5c Oven For 10min. View Film Color | No Changing | |
in 300+/-5 Oven For 5min, View The Color | Slightly Green | ||
Anti-Oil | Dipping Into Volatilizing
Oil(Af-2c,Af-2as,T7k18b,Rf-190) For 24 এইচ |
No Peeling |
The hydrophilic coating on the aluminum foil promotes improved moisture absorption and increases the surface area, resulting in enhanced heat transfer efficiency. This allows for better cooling and heat dissipation, making it ideal for heat exchangers, air conditioning systems, and refrigeration units.
Hydrophilic Aluminum Foil is highly resistant to corrosion, making it suitable for applications in humid and corrosive environments. This resistance ensures the durability and longevity of the foil, even in challenging conditions, thereby reducing maintenance needs and extending the lifespan of equipment.
By facilitating efficient heat exchange, Hydrophilic Aluminum Foil helps optimize energy usage. It allows systems to cool more effectively, reducing the energy consumption required for maintaining desired temperatures. This can lead to energy savings and cost reduction in long-term operations.
Aluminum is a recyclable material, and the hydrophilic foil can be recycled after use, contributing to sustainable practices and reducing environmental impact. Choosing Hydrophilic Aluminum Foil aligns with eco-friendly initiatives and supports a circular economy.
The production process of hydrophilic aluminum foil is basically the same as that of aluminum foil, except that 3 processes are added in the middle;
Rewind after the above 3 steps (this process is exactly the same as aluminum foil production)
Hydrophilic foil is widely used in refrigeration equipment such as air conditioners and refrigerators, as well as some industrial heat exchange systems;
Air conditioning systems | Refrigerator | Heat exchangers |
রেডিয়েটার | Condenser | Evaporator |
Dry Environment: Store hydrophilic aluminum foil in a dry environment with low humidity levels. Moisture can affect the hydrophilic properties of the foil and lead to degradation.
Temperature Control: Maintain a stable temperature for the storage area. Extreme temperatures can impact the structural integrity and performance of the foil.
Protection from Contaminants: Keep the hydrophilic foil away from dust, dirt, and other contaminants that could potentially affect its surface or hydrophilic coating.
Ordinary aluminum foil cannot meet the requirements of energy saving, environmental protection, জারা প্রতিরোধ, and antibacterial for air conditioners. Hydrophilic aluminum foil has strong hydrophilicity. The water droplets condensed on the heat sink are easy to spread and flow down the heat sink to avoid low ventilation effect.
The surface of the hydrophilic aluminum foil is covered with a hydrophilic layer, and the condensed water will spread rapidly on the hydrophilic aluminum foil without condensing into water droplets, which increases the heat transfer area, speeds up the cooling and heating speed, and effectively avoids the noise caused by air flow.
হাইড্রোফিলিক অ্যালুমিনিয়াম ফয়েল | Copper Foil | |
---|---|---|
Heat Transfer | ভাল | চমৎকার |
Moisture Management | চমৎকার | Limited |
জারা প্রতিরোধের | ভাল | চমৎকার |
ওজন | লাইটওয়েট | Relatively Heavy |
দাম | Affordable | Expensive |
উপলভ্যতা | Widely Available | Limited |
তড়িৎ পরিবাহিতা | Moderate | চমৎকার |
Compatibility | Suitable for most applications | Suitable for specific applications |
Q:What is hydrophilic coating?
ক:acrylic or epoxy
Q:Can Hydrophilic Aluminum Foil be recycled?
ক:হ্যাঁ, Hydrophilic Aluminum Foil can be recycled. Aluminum is highly recyclable and can be processed repeatedly without losing its properties. Recycling Hydrophilic Aluminum Foil helps conserve natural resources and reduces the environmental impact associated with primary aluminum production.
8021 অ্যালুমিনিয়াম ফয়েল একটি সাধারণ খাদ 8000 সিরিজ অ্যালুমিনিয়াম মিশ্রণ. সাধারণ অ্যালুমিনিয়াম ফয়েল 8000 সিরিজ অ্যালুমিনিয়াম খাদ অন্তর্ভুক্ত 8011 অ্যালুমিনিয়াম ফয়েল এবং 8079.
1050 অ্যালুমিনিয়াম কয়েল বাণিজ্যিকভাবে বিশুদ্ধ পেটা করা হয় 1000 বিশুদ্ধতা সহ মিশ্রণের সিরিজ 99.5% অ্যালুমিনিয়াম. এই মিশ্রণটি সাধারণত ঠান্ডা রোলিং বা এক্সট্রুশনের জন্য ব্যবহৃত হয়. এটি উচ্চ প্লাস্টিসিটির বৈশিষ্ট্য আছে, জারা প্রতিরোধ, বৈদ্যুতিক পরিবাহিতা, এবং তাপ পরিবাহিতা.
মধুচক্র অ্যালুমিনিয়াম ফয়েল, অ্যালুমিনিয়াম মধুচক্র কোর নামেও পরিচিত, অ্যালুমিনিয়াম ফয়েলের দুটি স্তর থেকে তৈরি এক ধরনের লাইটওয়েট মূল উপাদান যা একত্রে এমনভাবে বাঁধা থাকে যা ষড়ভুজ কোষের একটি সিরিজ তৈরি করে, অনেকটা মৌচাকের মত.
চুলের সেলুনের জন্য অ্যালুমিনিয়াম ফয়েল সবচেয়ে সাধারণ 8011 খাদ হে টেম্পার, চমৎকার শক্তির কারণে, নমনীয়তা, এবং তাপ প্রতিরোধের, হেনান হুয়াওয়ে আপনাকে সেরা মানের সরবরাহ করে 8011-0 চুলের সেলুনের জন্য অ্যালুমিনিয়াম ফয়েল.
6082 অ্যালুমিনিয়াম ফালা সাধারণত উচ্চ শক্তি জন্য তাপ চিকিত্সা করা যেতে পারে, কিন্তু তুলনামূলকভাবে কম নমনীয়তা।6082 অ্যালুমিনিয়াম খাদ হল একটি মিশ্র ধাতুর মডেল।.
Pvdf প্রলিপ্ত অ্যালুমিনিয়াম কয়েল হল এক ধরনের রঙিন প্রলিপ্ত অ্যালুমিনিয়াম কয়েল, রঙিন প্রলিপ্ত অ্যালুমিনিয়াম কয়েল পলিয়েস্টারে ভাগ করা যায় (পিই) প্রলিপ্ত অ্যালুমিনিয়াম কয়েল, ফ্লুরোকার্বন (পিভিডিএফ) প্রলিপ্ত অ্যালুমিনিয়াম কয়েল এবং epoxy রোলার প্রলিপ্ত অ্যালুমিনিয়াম কয়েল.
নং 52, ডংমিং রোড, ঝেংঝো, হেনান, চীন
হেনান হুয়াওয়ে অ্যালুমিনিয়াম কো., লিমিটেড, চীন হেনানের বৃহত্তম অ্যালুমিনিয়াম সরবরাহকারীর মধ্যে একটি,আমরা 2001 সালে প্রতিষ্ঠিত, এবং আমাদের আমদানি ও রপ্তানি এবং উচ্চ মানের অ্যালুমিনিয়াম পণ্যগুলিতে সমৃদ্ধ অভিজ্ঞতা রয়েছে
সোম-শনি, 8AM - 5PM
রবিবার: বন্ধ
© কপিরাইট © 2023 হেনান হুয়াওয়ে অ্যালুমিনিয়াম কো., লিমিটেড
সর্বশেষ মন্তব্য
জনাব, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99.50% মিনিট) SIZE:450 X32 X6 MM. আপনার এক 570 EN-AW 1050 ক, পরিমাণ = 3400 কেজি
হ্যালো, আপনি নিম্নলিখিত হিসাবে আইটেম অফার তাই দয়ালু হবে: কয়েল 0,6х1250 (1000)mm EN AW-3105 5tons
হ্যালো, আপনি আমাকে অ্যালুমিনিয়াম প্লেট দিতে পারেন?? আসলে আমার দরকার: 110মিমি x 1700 মিমি x 1700 মিমি 5083 H111 - 21 pcs Next year planed is 177 পিসি
মহান নিবন্ধ. আমি প্রসন্ন ছিলাম, যে আমি এই নিবন্ধটি খুঁজে পেয়েছি. অনেকেই তাই মনে করেন, যে তারা এই বিষয়ে নির্ভরযোগ্য জ্ঞান আছে, কিন্তু এই প্রায়ই ক্ষেত্রে হয় না. তাই আমার আনন্দদায়ক বিস্ময়. আমি অভিভূত. আমি অবশ্যই এই জায়গাটি সুপারিশ করব এবং আরও প্রায়ই ফিরে আসব, নতুন জিনিস দেখতে.
অ্যালুমিনিয়াম ফালা প্রয়োজন