1060 アルミコイル

とは 1060 アルミコイル?

1060 アルミコイルは次のように構成されています。 99.6% アルミニウム, に似ています 1050 合金 of the same family, しかし、アルミニウムの含有量は次のように異なります。 0.1%. 冷間加工で強化できる, ただし熱処理によるものではありません.

1060 alloy aluminum coil has relatively low strength and is essentially pure aluminum alloy with many different tempering states, such as O (焼きなましされた), H12, H14, H16, H18, 等.

アルミコイル 1060 has a smooth surface and high cleanliness, suitable for polymer welding. Its products have good elongation and tensile strength, which can fully meet the requirements of conventional processing (stamping and stretching).

It also has high plasticity, 耐食性, 電気伝導性, 熱伝導率, and other properties, and can withstand various pressure processing, ストレッチ, and bending. しかし, due to low strength, non-heat treatment, 加工性が悪い; ガス溶接, atomic hydrogen welding, and contact welding can be used, but brazing is not recommended.

1060 aluminum coils are widely used in power battery soft connections, アルミニウムプラスチックパネル, ランプ, 兆候, 等.

Parameters of 1060 合金アルミニウムコイル

保護: paper interlayer, white film, ブルーフィルム, black and white film, and micro-adhesive film, according to your requirements.
Female coil: CC or DC
表面処理: つや消し, 鏡, エンボス加工, Sandblasted, 等

から: ウィキペディア

Product Advantages of 1060 アルミコイル

1. 良好な導電性, 溶接性, 耐食性, と成形性;
2. Mature technology, 良品質, そして低価格;
3. Can be chemically treated to produce smooth and uniform surfaces for various equipment industries;
4. 1060 aluminum coil processing technology is mature, and the price has a huge advantage over other high-grade aluminum alloys.

の適用 1060 Aluminium Coil

点灯, 印刷, 梱包, 装飾, electronic surface, hot-rolled thick plate, PS substrate, aluminum-plastic substrate, aluminum curtain wall substrate, aluminum-plastic plate substrate, アルミガスケット, aluminum embossed plate.

Interior: Walls, 天井, bathrooms, kitchens and balconies, shutters, ドア, カーテンウォール
Exterior Walls: Walls, Facades, Roofs, Tents, Tunnels, Caps, Trim
Advertising: Display platforms, signboards, lintels, and storefronts.

1060 アルミニウム vs 6061

1060 aluminum plate is pure aluminum plate, and the aluminum content exceeds 99.6%. Moderate hardness and low price. 6061 t6 aluminum plate belongs to Al-Mg-Si alloy with certain silicon and magnesium composition. Has certain wear resistance and rust resistance. Its strength is much higher than that of a 1060 アルミ板.

1060 has moderate hardness and can adapt to common processing conditions such as bending, その間 6061 has better hardness and is widely used in places with high hardness requirements. The common aluminum plate thickness of 6061 alloy is 6-100mm.

同時に, の 6061 アルミニウム板は熱処理可能です. 6061-T aluminum sheet suitable for mold and machinery manufacturing is such a temper.