3003 アルミニウムストリップ

最高のアルミニウムストリップサプライヤー — HWALU

特徴の概要 3003 アルミストリップ

3003 アルミニウムストリップはから作られています 3003 アルミニウム合金.

の 3 シリーズアルミニウム合金は、アルミニウムマンガン合金とも呼ばれます. ただし熱処理ではありません, 冷間加工のみ.

の強さ 3003 アルミニウムは約 10% よりも高い 1100 アルミニウム, 成形性も良好です, 溶接性, 耐食性.

3003 アルミニウムストリップ

アルミニウム帯の原材料は、純アルミニウムまたはアルミニウム合金鋳造アルミニウムコイルおよび熱間圧延アルミニウムコイルです。, 冷間圧延機でさまざまな厚さと幅の薄いアルミニウムコイルに圧延されます。, 用途に応じてスリット機で幅の異なるアルミコイルを縦方向に切断します。. 持ってくる.

Commonly used aluminium strip series are 1000, 3000, 5000 そして 8000

The most commonly used ones should belong to the all-soft series because the O state is easier to stretch and bend.

アルミニウムのパラメータ 3003 ストリップ

から: ウィキペディア

の適用 3003 アルミストリップ

Such as kitchenware, food and chemical products processing and storage devices, タンクおよび液体製品を輸送するためのタンク, various pressure vessels and pipes processed with thin plates, 一般的な食器, ヒートシンク, cosmetic plates, コピー機のローラー, そして船の資材も.

Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gas medium, 郵便受けなど, ガソリンまたは潤滑油の導管, 深絞り加工による各種液体容器、その他軽荷重部品: wire rod Used to make rivets.

の適用 3003 アルミストリップ

3003 断熱ガラス用アルミニウムストリップ

3003 aluminum strip can be used as an insulating glass profile, which is a series of metal materials, which finally stand out after comparing with each other.

Its quality is directly related to the use effect, 耐久性, and thermal insulation function of insulating glass.

The main function is to make two or more pieces of glass in the insulating glass evenly separated and effectively supported.

3003 パワーバッテリーシェル用アルミニウム合金ストリップ

材料要件:

• The surface roughness of the strip is controlled at 0.20-0.35μm, and the surface is required to be smooth and clean, without periodic sticking, marks, and other defects.
• Obvious bright and dark bands are not allowed.
• 腐食, penetrating pores, 傷, 金属, and non-metallic indentations are not allowed.

Power battery housing

現在のところ, aluminum power battery shells for electric vehicles generally use 3003-O or 3003-H14 aluminium alloys.

This material is easy to form, has high-temperature corrosion resistance, good heat transfer, and electrical conductivity.

The aluminum power battery shell (except the shell cover) の 3003 aluminum alloy can be drawn and formed at one time.

Compared with the stainless steel shell, the welding process of the bottom of the box can be omitted.

HUAWEIアルミテープ梱包, 交通機関, とストレージ

パッケージ

1. The aluminium strip should be rolled tightly, no loose layer is allowed; no joints are allowed in the coil; the edge of the aluminum strip should be cut neatly, without cracks and burrs, the stacking fault should not be greater than 3mm, the tower shape should not be greater than 20mm, and the coil core must be smaller than The width of the aluminum strip shall not have aluminum plates protruding at both ends;

2. The aluminum coils should be stacked in a flat cylindrical shape, the outer opening of each aluminum coil should be on the same vertical line, and the weight of each box should not exceed 5 トン. Single-layer packing box for flat transportation;

3. Each box of aluminum should have a packing list, including the serial number, 抗張力, 伸長, net weight and gross weight of each roll of aluminum;

4. Each roll of aluminum should have a certificate of conformity, and indicate the inspection index, 重さ, 等.

パッケージ

交通機関

When transporting aluminum materials, do not throw, violently impact, spray oil and be contaminated by chemicals.

交通機関

店

1. Do not be hit or thrown during transportation;

2. Aluminum materials should be stored in a well-ventilated place, away from heat sources, oil stains and chemicals, and should not be damp, and should not be stored outdoors;

3. Aluminum strips should be used as soon as possible;

4. Please do not open aluminum materials that are not in use temporarily. For aluminum that has been opened but not used, できるだけ早く封印すべきだ, 乾燥剤をパッケージ内に入れる必要があります.

アルミシート専門店