Honingraat aluminiumfolie

Thuis » Producten » Aluminiumfolie » Honingraat aluminiumfolie

Honingraat aluminiumfolie, ook bekend als aluminium honingraatkern, is een soort lichtgewicht kernmateriaal gemaakt van twee lagen aluminiumfolie die zo aan elkaar zijn gehecht dat er een reeks zeshoekige cellen ontstaat, net als een honingraat.

Honingraat aluminiumfolie

  • Legering: 3003/3004/3104/5052
  • Woedeaanval: H18/H19
  • Dikte (um) : 20-100um
  • Breedte (mm): 90-1500mm, common 914/1020mm
  • Lengte: Coils, gekostomiseerd
  • Surface Technology: Pickling+water washing+silane passivation+epoxy varnishes

  E-mail   Wtatsapp   Inquiry

What is honeycomb aluminum foil

Honingraat aluminiumfolie, ook bekend als aluminium honingraatkern, is een soort lichtgewicht kernmateriaal gemaakt van twee lagen aluminiumfolie die zo aan elkaar zijn gehecht dat er een reeks zeshoekige cellen ontstaat, net als een honingraat. These cells are then expanded into a core material that is lightweight, sterk, and rigid.

Honeycomb Aluminum Foil

Honingraat aluminiumfolie

Honeycomb aluminum foil is commonly used in a variety of applications, such as aerospace and aviation industries, marine and naval structures, as well as in construction and architecture. The lightweight and high strength properties of honeycomb aluminum make it an ideal material for sandwich panels, which are made by bonding two outer layers of material (such as fiberglass or carbon fiber) to a honeycomb aluminum core.

Honeycomb aluminum foil also has excellent sound and vibration dampening properties, making it useful in applications such as speaker grills, acoustic panels, and industrial enclosures.

Honeycomb aluminum foil standards

Executable standards for honeycomb aluminum foil: nationale standaard, Amerikaanse standaard, Europese standaard, Russische standaard, Chinese standard, enz.

3003 H18 Aluminum Foil Jumbo Roll

3003 H18 Aluminum Foil Jumbo Roll

Aluminum foil specifications for honeycomb core

Legering 3003/3004/3104/5052
Woedeaanval H18/H19
Dikte 20-100um
Breedte 20-1500mm, Common 914/1020mm, max 1500mm
Lengte Aanpassen
Honeycomb side length 5/6/8/10/12 mm
Oppervlaktetechnologie Pickling+water washing+silane passivation+epoxy varnish

Introduction of aluminum foil for honeycomb core

Aluminum foil for honeycomb core is a type of aluminum foil that is used as a raw material to manufacture honeycomb cores.

The common alloy grades are 3003/3004/3104/5052, the mechanical and mechanical properties of 3004 En 3104 are basically the same, usually 3004 can be used instead of 3104 alloy aluminum;

The biggest difference between honeycomb core used aluminum foil and conventional aluminum foil is the surface treatment;

5052 Aluminum Honeycomb Core

5052 Aluminum Honeycomb Core

Honeycomb core used aluminum foil surface treatment process

    • 1. Honeycomb core used aluminum foil surface cleaning (beitsen + water washing), the surface dyne value can reach more than 50, the relative cost is relatively low, but it is easy to form an oxide layer on the surface;
    • 2. Silane treatment agent passivation (chromium heavy metals are easy to exceed the standard, currently not suitable for passivation of aluminum foil);
    • 3. Coating epoxy varnish;

Advantages of aluminum foil for Huawei honeycomb panels

1. High board surface flatness – good board shape

Equipped with a shape controller to monitor the shape in real time; the follow-up straightening process, the second correction of the shape; to ensure that the aluminum foil shape is good, the layout is high, and the shape accuracy is good!

2. High strength – not easy to deform after processing

3003-h18 aluminum foil is used as the aluminum foil base material for the honeycomb core, which has high strength, the finished product is not easy to deform, the end surface is flat, the edge is free of burrs, and the board surface is flat after bonding and laminating;

3. The surface of the aluminum foil is degreased and clean – the glue is not easy to fall off

Special degreasing equipment and passivation process ensure that the surface of the aluminum foil is free of oil, the adhesive is firm, not easy to fall off, and has a long service life;

Application of aluminum honeycomb panels

The upper and lower bottom plates and panels of aluminum honeycomb panels are made of aluminum alloy plates, with a thick and light honeycomb core sandwiched in the middle (the aluminum honeycomb core is made of aluminum foil through complicated processes;), the panel and the sandwich core are bonded The agent is cemented into a monolithic rigid structure.
Panel surface treatment can be fluorocarbon, roller coating, thermal transfer printing, wire drawing, oxidation; aluminum honeycomb panels can also be pasted and compounded with fireproof boards, stone materials, and ceramics.

Aluminum honeycomb panels have the characteristics of light weight, Grote sterkte, sound insulation, heat insulation, waterbestendig, vocht bestendig, and heat preservation;

Honeycomb Aluminum Panel For Ceiling

Honeycomb Aluminum Panel For Ceiling

  • 1) Building curtain wall external wall hanging board
  • 2) Interior decoration works
  • 3) Roofing material
  • 4) Buildings on board
  • 5) Aviation manufacturing industry
  • 6) Indoor partition and product display stand
  • 7) Commercial transport vehicle and container vehicle body
  • 8) Interior decoration of buses, treinen, subways and rail transit vehicles

How to make aluminum honeycomb panels

Honeycomb Aluminum Foil

Honingraat aluminiumfolie

  • 1) Surface passivated aluminum foil coated node glue (epoxy modified high temperature curing glue);
  • 2) The aluminum foil is sliced according to the design size, stacked (the number of layers is related to the length of the finished honeycomb core in the later stage), fused at high temperature, cut into pieces (according to the height of the finished honeycomb core), and pulled into a hexagonal honeycomb;
  • 3) Apply glue to the inner side of the bottom plate, place the honeycomb core on it, adjust the position, and then apply glue to the inner side of the panel and cover it on the upper layer of the honeycomb.
  • 4) Hydraulic solidification, cooling and cutting.

Related information

What is dyne value

Derived from dyne, it is the unit of force, expressed as dyne/cm, expressing the size of the surface tension coefficient, defined as the force of mutual traction per unit length between two adjacent parts of the liquid surface, 1dyn/cm=1mN /m.

When the surface tension coefficient is large, the liquid can wet the solid surface better, dat is, the surface dyne value of the material is high.

The wettability of solid surfaces is usually evaluated by surface free energy, contact angle, and dyne value. Relatively speaking, the contact angle measuring instrument will be more accurate, followed by the surface free energy, and the dyne pen can quickly and roughly judge.

Dyne value measurement method

Dyne Pen Test
Dyne pen specifications generally range from 30-70, and our common ones are 36/38/40/42/44. These numbers represent that the surface tension coefficient of the material is so large

Dyne Pen Test

Dyne Pen Test

How to use Dyne pen:
Choose a pen with an estimated dyne size.
Draw a straight line (5-10cm) evenly on the surface of the measured object with the Dyne pen.
After 2~3 seconds, observe whether the handwriting shrinks and condenses into water droplets. If there are shrinkage drops, change to a dyne pen with a lower value and draw a straight line until there is no shrinkage and no droplet points to determine the surface tension value of the object.

If the handwriting is smooth, change to a dyne pen with a higher value and draw again until the handwriting shrinks, then the dyne pen number of the previous value is the dyne value on the surface of the measured object.

Dyne pen result analysis:

If the drawn lines are evenly distributed without any beads, it means that the surface tension of the film is higher than the dyne pen index, and it can be printed in this case.
If the drawn line shrinks slowly, it means that the surface tension of the film is slightly lower than the dyne pen index. In dit geval, the printing effect is not good.
If the drawn line shrinks immediately and forms bead points, it means that the surface tension of the film is very lower than the dyne pen index. This case cannot be printed.

Laat een antwoord achter

Uw e-mailadres wordt niet gepubliceerd. Verplichte velden zijn gemarkeerd *

laatste Reacties

  • AKBAR SAJJAD zei:
    Geachte heer, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99,50% MIN) MAAT:450 X32 X6MM. JOUW EEN 570 NL-AW 1050 A, AANTAL=3400KG
  • Sviatlana Kapachenia Said:
    Hallo, Zou u zo vriendelijk willen zijn om het item als volgt aan te bieden: Spoel 0,6х1250 (1000)mm EN AW-3105 5tons
  • MILES zei:
    Hallo, Kunt u mij aluminiumplaten aanbieden?? Eigenlijk heb ik het nodig: 110mm x 1700 mm x 1700 mm 5083 H111 - 21 pcs Next year planed is 177 stuks
  • Fotograaf zei:
    Geweldig artikel. Ik was blij verrast, dat ik dit artikel heb gevonden. Veel mensen denken van wel, dat zij over betrouwbare kennis over dit onderwerp beschikken, maar dit is vaak niet het geval. Vandaar mijn aangename verrassing. ik ben onder de indruk. Ik zal deze plek zeker aanbevelen en vaker terugkomen, om nieuwe dingen te zien.
  • zei Kishor Wagh:
    eis van aluminium strip
  • hete producten

    Dit zijn onze best verkopende producten

    3003 Aluminum Foil

    3003 aluminiumfolie

    Ons 3003 Aluminiumfolieproducten zijn geëxporteerd naar Australië, Marokko, Syrië, Koeweit, Kalkoen, Saoedi-Arabië, VAE, Irak, Jordanië, Duitsland, Polen, Spanje, Brazilië, enz. Wij heten u oprecht welkom om onze fabriek te bezoeken.

    5083 Aluminum Alloy Coil

    5083 aluminium spoel

    Neem vandaag nog contact met ons op voor meer informatie over onze 5083 aanbod van aluminiumspiralen en hoe we aan uw specifieke eisen kunnen voldoen.

    Aluminum Plate Thickness Measurement

    3A21 Aluminum Plate Sheet

    3A21 aluminum plate is an Al-Mn series aluminum alloy, which belongs to the weldable LF21 aluminum alloy and is known for its excellent anti-rust properties.

    Coated Aluminium Foil

    gecoate aluminiumfolie

    Export van grondstoffen voor gecoate aluminiumfolie, fabriekslevering met de beste prijs, hoge kwaliteit, corrosiebestendigheid en lange levensduur

    Diamond Plate Aluminum Sheets 4X8

    Aluminiumplaten met diamantplaat 4×8

    Aluminium platen met traanplaat 4x8 zijn verkrijgbaar in de maten 6061-T6 en 3003-H14. ze hebben een hogere sterkte, slijtvastheid, dragend, bewerkbaarheid, corrosieweerstand, enz. Daarom, populair in de bouw, productie, voertuigen, schepen en diverse velden.

    3003 Aluminum Perforated Sheets

    3003 Aluminium geperforeerde platen

    3003 Aluminium geperforeerde platen worden verkregen door ponsen 3003 platen van aluminiumlegeringen en worden vaak gebruikt in architectonische decoratie, voedselverwerkende machines en andere gebieden.

    Ons kantoor

    Nr.52, Dongming-weg, Zhengzhou, Henan, China

    Email ons

    [email protected]

    Bel ons

    +8618137782032

    HWALU

    Henan Huawei Aluminium Co., Ltd, Een van de grootste aluminiumleveranciers in China Henan,We zijn opgericht in 2001 en hebben een rijke ervaring in import en export en hoogwaardige aluminiumproducten

    Openingstijden:

    Ma – Za, 8AM – 17.00 uur

    Zondag: Gesloten

    Neem contact op

    Nr.52, Dongming-weg, Zhengzhou, Henan, China

    +8618137782032

    [email protected]

    Laat een antwoord achter

    Uw e-mailadres wordt niet gepubliceerd. Verplichte velden zijn gemarkeerd *

    © Auteursrecht © 2023 Henan Huawei Aluminium Co., Ltd

    Bel ons

    Email ons

    WhatsApp

    Navraag