1060 Aluminum Coil

1060 Aluminum Coil is composed of 99.6% aluminum, which is similar to the 1050 alloy of the same family, but the aluminum content differs by 0.1%.

1060 Aluminum Coil

  • Thickness: 0.3mm – 6.0mm
  • Width: 100-2600mm
  • Lenght:200-11000mm
  • Temper: O、H18 、H22、H24
  • Price: $2400
  • Minimum Order Quantity: 5MT
  • Application: Power Battery Soft Connection, Aluminum Plastic Board, Lamp Material, Capacitor Shell, etc.

  E-mail   Wtatsapp   Inquiry

Table Of Contents [ ]

What is 1060 Aluminum Coil?

1060 Aluminum Coil is composed of 99.6% aluminum, which is similar to the 1050 alloy of the same family, but the aluminum content differs by 0.1%. It can be strengthened by cold working, but not by heat treatment.

1060 alloy aluminum coil has relatively low strength and is essentially pure aluminum alloy with many different tempering states, such as O (annealed), H12, H14, H16, H18, etc.

aluminum coil 1060 has a smooth surface and high cleanliness, suitable for polymer welding. Its products have good elongation and tensile strength, which can fully meet the requirements of conventional processing (stamping and stretching).

1060 Aluminum Coil

1060 Aluminum Coil

It also has high plasticity, corrosion resistance, electrical conductivity, thermal conductivity, and other properties, and can withstand various pressure processing, stretching, and bending. However, due to low strength, non-heat treatment, and poor machinability; gas welding, atomic hydrogen welding, and contact welding can be used, but brazing is not recommended.

1060 aluminum coils are widely used in power battery soft connections, aluminum-plastic panels, lamps, signs, etc.

Parameters of 1060 Alloy Aluminum Coil

Protection: paper interlayer, white film, blue film, black and white film, and micro-adhesive film, according to your requirements.
Female coil: CC or DC
Surface treatment: Brushed, Mirror, Embossed, Sandblasted, etc

Chemical composition of 1060 aluminum alloy coil(%)

element Al Copper Iron Magnesium Manganese Silicon Titanium Vanadium Zinc
proportion ≥99.6 ≤0.05 ≤0.35 ≤0.03 ≤0.03 ≤0.25 ≤0.03 ≤0.05 ≤0.05

From: wikipedia

Mechanical properties of aluminum coil 1060

Specified Tensile
Thickness(in.) (ksi) (ksi) (%)


0.006-0.019 8.0-14.0 2.5 Min15
0.020-0.050 Min22
0.051-3.000 Min25


0.017-0.050 11.0-16.0 9.0 Min6
0.051-2.000 Min12


0.006-0.019 12.0-17.0 10.0 Min1
0.020-0.050 Min5
0.051-1.000 Min10


0.006-0.019 14.0-19.0 11.0 Min1
0.020-0.050 Min4
0.051-0.162 Min5


0.006-0.019 Min16.0 Min12.0 Min1
0.020-0.050 Min3
0.051-0.128 Min4
1060-H112 0.250-0.499 Min11.0 Min7.0 Min10
0.500-1.000 Min10.0 Min5.0 Min20
1.001-3.000 Min9.0 Min4.0 Min25

Product Advantages of 1060 Aluminum Coil

  1. Good electrical conductivity, weldability, corrosion resistance, and formability;
  2. Mature technology, good quality, and low price;
  3. Can be chemically treated to produce smooth and uniform surfaces for various equipment industries;
  4. 1060 aluminum coil processing technology is mature, and the price has a huge advantage over other high-grade aluminum alloys.

Application of 1060 Aluminium Coil

Lighting, printing, packaging, decoration, electronic surface, hot-rolled thick plate, PS substrate, aluminum-plastic substrate, aluminum curtain wall substrate, aluminum-plastic plate substrate, aluminum gasket, aluminum embossed plate.

Application of 1060 Aluminium Coil

Application of 1060 Aluminium Coil

Interior: Walls, ceilings, bathrooms, kitchens and balconies, shutters, doors, curtain walls
Exterior Walls: Walls, Facades, Roofs, Tents, Tunnels, Caps, Trim
Advertising: Display platforms, signboards, lintels, and storefronts.

1060 aluminum vs 6061

1060 aluminum plate is pure aluminum plate, and the aluminum content exceeds 99.6%. Moderate hardness and low price. 6061 t6 aluminum plate belongs to Al-Mg-Si alloy with certain silicon and magnesium composition. Has certain wear resistance and rust resistance. Its strength is much higher than that of a 1060 aluminum plate.

1060 has moderate hardness and can adapt to common processing conditions such as bending, while 6061 has better hardness and is widely used in places with high hardness requirements. The common aluminum plate thickness of 6061 alloy is 6-100mm.

At the same time, the 6061 aluminum plate can be heat treated. 6061-T aluminum sheet suitable for mold and machinery manufacturing is such a temper.

Leave a comment

Related Content
Our Office

No.52, Dongming Road, Zhengzhou, Henan, China

Email Us



Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products

Opening Hours:

Mon – Sat, 8AM – 5PM

Sunday: Closed

Get In Touch

No.52, Dongming Road, Zhengzhou, Henan, China

+86 188 3893 9163



© Copyright © Henan Huawei Aluminium Co., Ltd

Call Us

Email Us