3003 h14 aluminum coil refers to h14 tempered 3003 aluminum coil.And H14 tempering usually means getting 1/2 the strength with the hardness.
3003 h14 aluminum coil refers to h14 tempered 3003 aluminum coil. Among them, 3003 is the aluminium alloy product number named by the AA Aluminium Association. h stands for cold work hardening. And H14 tempering usually means getting 1/2 the strength with the hardness.
3003 H14 Aluminum Coil
3003 is the most widely used aluminium alloy. It is basically commercial pure aluminum plus manganese, and its strength is about 20% higher than that of 1100 grade.
So it has all the good features of 1100 and higher strength. It has excellent corrosion resistance. It has excellent machinability and can be deep drawn or spun, welded, or brazed.
The alloy composition of 3003 aluminium is:[alloy]
| Temper | Specified Thickness(in) | Tensile Strength – KSI | Elongationin 2 inches % | |||
| Ultimate | Yield | |||||
| Min | Max | Min | Max | |||
| H14 | 0.009 – 0.012 | 20 | 26 | – | – | 1 |
| H14 | 0.013 – 0.019 | 20 | 26 | – | – | 2 |
| H14 | 0.020 – 0.031 | 20 | 26 | – | – | 3 |
| H14 | 0.032 – 0.050 | 20 | 26 | – | – | 4 |
| H14 | 0.051 – 0.113 | 20 | 26 | – | – | 5 |
| H14 | 0.114 – 0.161 | 20 | 26 | – | – | 6 |
| H14 | 0.162 – 0.249 | 20 | 26 | – | – | 7 |
It is not heat treatable, so it must be strengthened by cold working alone, but it can be forged at high temperatures from 500 to 950 degrees Fahrenheit.
Aluminium is easy to hot work when heat is used in this range. However, cold working is easy and can be done using traditional methods.
When annealing the alloy during or after cold working techniques, it should be done at 775 degrees Fahrenheit. This will give it enough time to heat the air thoroughly before it cools. The only way to harden this alloy is by cold working.
3003 h14 aluminum properties
Performance
1. Excellent anti-rust performance.
2. Excellent forming processing characteristics, high corrosion resistance, good weldability and electrical conductivity, and the strength is higher than 1100.
3. The surface is smooth, plastic and pressure resistant;
4. The power battery shell is the first choice plate, which is impact-resistant, not easy to crack and leak, and meets the strength and stiffness requirements of the power battery shell.
Aluminum coil for air conditioner 3003 H14
White Coated Aluminum Coil 3003 H14 for ACP
3003 H14 aluminum coil for a lithium battery case
For the consideration of light weight and processability, it is an inevitable choice to use 3003 aluminum coil to make the battery case.
Diamond plate aluminum sheets 4x8 is available in 6061-T6 and 3003-H14 sizes. they have higher strength, wear resistance, load-bearing, machinability, corrosion resistance, etc. Therefore, popular in construction, manufacturing, vehicles, ships and various fields.
6000 series aluminum alloy is a type of aluminum alloy that is composed of 90-94% aluminum, with the remaining 6-10% consisting of other elements such as magnesium, silicon, and copper.
High-formability Colored Lacquered Aluminum Foil O Temper engineered for deep-draw lidding, blister backing and decorative packaging — excellent adhesion, low pinhole and food-grade compliance.
6061 aluminum sheet is an al-si-mg alloy that has been strengthened by precipitation hardening. 6061 aluminum has a high strength-to-weight ratio, above-average corrosion resistance, good machinability, and is well suited for welding.
5052 aluminum sheet is part of the 5000 series of aluminum. The grades in this series are alloyed with magnesium (2.5%) and have medium to high strength properties.
3A21 aluminum plate is an Al-Mn series aluminum alloy, which belongs to the weldable LF21 aluminum alloy and is known for its excellent anti-rust properties.
No.52, Dongming Road, Zhengzhou, Henan, China
Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products
Mon – Sat, 8AM – 5PM
Sunday: Closed
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Latest Comments
Aluminum 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต
سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر
Dear Sales Team, I hope you are doing well. We are looking to source aluminum products from your company and would appreciate receiving your best quotation for the following: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available standard sheet sizes. Kindly quote the price per sheet and the price per metric ton. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available coil widths, standard coil weights, and inner diameter specifications. Kindly quote the price per metric ton. For both sheets and coils, please include: Available alloys (e.g. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (including sea freight), or alternatively provide both FOB China and CIF Jebel Ali Port, UAE prices. If available, please also send: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. We are interested in establishing a long-term business relationship. Our initial purchase volume is expected to be 100+ metric tons, with the potential for larger and recurring orders if your pricing, quality, and service meet our requirements. Thank you for your time. We look forward to receiving your quotation and hope to build a successful long-term partnership. Best regards, Eng.Yousef
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります 又、そのような製品があるようでしたらその重量、価格をおしえていただけますか 現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます 出来ましたらメールでお返事をいただけますか
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚み で曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※約1000mmの側溝に渡して200kg耐えられるかとなります その製品の重量、価格をおしえていただけますか