Under the urgent situation that the world is paying more and more attention to energy conservation and environmental protection, reducing energy consumption, reducing exhaust emissions and improving vehicle power by reducing their own weight has become an important direction for major auto companies to improve their competitiveness.
অটোমোবাইল লাইটওয়েট একটি প্রতিনিধি উপাদান হিসাবে, গাড়ির শরীরের ওজন কমাতে অটোমোবাইল শিল্পের বিকাশের জন্য অ্যালুমিনিয়াম একটি মূল কাঁচামাল হয়ে উঠেছে.
Aluminum Sheet For Car have the advantages of light weight, অনেক শক্তিশালী, good tensile properties, জারা প্রতিরোধ, ইত্যাদি, and are good materials for automobile manufacturing and parts processing.
Recommended alloy: 5182 অ্যালুমিনিয়াম প্লেট
While reducing the noise of the engine, the hood of the car can also isolate the heat generated by the engine when it is working, effectively protect the paint on the surface of the hood, prevent aging, and protect the engine and surrounding pipeline accessories.
Under the hood, is an important part of the car, including the engine, circuit, braking system, transmission system, which is very important to the vehicle.
By improving the strength and structure of the hood, it can fully prevent unfavorable factors such as impact, corrosion, rain, and electrical interference, and fully protect the normal operation of the vehicle. এর জারা প্রতিরোধের 5182 aluminum plate determines that the car hood “will be used without it”.
Recommended alloys: 5083, 5754, 5052 অ্যালুমিনিয়াম খাদ sheets.
Auto parts cover a wide range. Developed 5083, 5754, 5052 aluminum alloy plates and other light aluminum alloy products, which are used in automobile bottom guard plates and automobile fuel tanks.
5083 অ্যালুমিনিয়াম প্লেট এবং 5052 aluminum alloy are widely used in these auto parts, with good practical application effect and good market response.
Recommended alloy grades: 1060, 1050 খাদ
Recommended alloy state: ও
প্রয়োগ: It is suitable for producing various stamping parts such as automobile engine heat shield, heat shield parts, engine heat shield, automobile water tank, exhaust pipe heat shield parts, ইত্যাদি.
Embossed aluminum plate is an aluminum product with various patterns on the surface after calendering, and it is widely used. The embossed aluminum plate can increase the length and area of heat exchange with the outside air. On the premise of ensuring its good thermal conductivity, aluminum alloys should reduce costs as much as possible, and select corrosion-resistant materials for processing.
Recommended Alloy: 3003-H14
3003 অ্যালুমিনিয়াম প্লেট is a widely used power battery shell material, which belongs to aluminum-manganese alloy. এটি চমৎকার ফর্মেবিলিটি আছে, উচ্চ জারা প্রতিরোধের, good weldability and deep drawing performance, and is easy to stretch and form aluminum casings for power batteries.
Aluminum shells are mainly used for square lithium batteries. Compared to steel shells, aluminum shells are lighter in weight and can be made thinner. উপরন্তু, the aluminum shell alloy material has obvious safety properties.
The battery aluminum shell made of 3003 aluminum plate has the characteristics of corrosion resistance, impact resistance, good punching and tensile properties, and is not easy to crack and leak.
1235 অ্যালুমিনিয়াম ফয়েল এবং 1060/1070/1100 aluminum foil are recommended for battery cells.
3003:3003+4045
3003mod:3003mod+4343
New energy vehicle water cooling panels are used in load-bearing and corrosion-resistant environments and conditions. অতএব, it is necessary to develop high-strength, corrosion-resistant brazing composites to meet the design and application requirements of different water-cooled plates.
3003 aluminum plate has excellent performance and is widely used as a water-cooling plate material for automobiles. 3003 aluminum plate belongs to the series of aluminum-manganese alloys, which has the advantages of good corrosion resistance, low density, high specific strength, and easy processing and forming. It is an ideal lightweight material for automobiles.
As the country vigorously develops new energy vehicles, the demand for water-cooled plates will continue to rise, and the market demand for 3003 aluminum plates for brazing composite materials will also continue to rise.
Recommended alloy grade: 6061
The new energy vehicle battery tray is the skeleton of the battery system, which can play the role of shock resistance, vibration resistance and protection to other systems. The battery tray has gone through different stages of development, from the initial steel box to the current aluminum alloy tray, and is developing to the more efficient copper alloy battery tray.
The aluminum alloy battery tray is made of 6061 অ্যালুমিনিয়াম প্লেট. Aluminum alloy battery tray has high rigidity, impact resistance, impact resistance and other properties. Its weight is further reduced compared to steel pallets. The battery tray of this structure is usually used for small energy battery packs.
6061 অ্যালুমিনিয়াম প্লেট is used for the aluminum tray of automobile new energy battery, which belongs to aluminum magnesium silicon alloy. It has moderate strength, ভাল জারা প্রতিরোধ, weldability and good oxidation effect. দ্য 6061 aluminum plate is used as the raw material of the battery aluminum tray, which meets the requirements of high precision, জারা প্রতিরোধ, high temperature resistance and impact resistance.
Recommended alloy grade: 6061
A car can be said to be a movable electromechanical complex whose components come from a variety of materials. New energy vehicles are new types of vehicles that change the traditional power source and use their own quantitative materials.
Whether it is the battery, motor, electronic control of the three electric cores, or the chassis, body, and interior of the car, they are all made of the most basic materials. অতএব, energy saving and emission reduction is actually starting from materials to reduce the weight of the body, so as to achieve the purpose of energy saving and emission reduction.
Among many materials, magnesium alloys and aluminum alloys are better lightweight materials. Mainly used for car body, chassis and most parts, these materials have characteristics and high quality manufacturing process.
HUAWEI Aluminum Co., লিমিটেড. can produce ultra-wide and ultra-thick 6061 অ্যালুমিনিয়াম প্লেট, eliminate internal stress, and cut without deformation, with a width of 2650mm and a thickness of 500 মিমি. It is one of the few manufacturers in China that can produce ultra-wide and ultra-thick aluminum plates.
কুকওয়্যার বটমগুলির জন্য অ্যালুমিনিয়াম বৃত্তকে সাধারণত বলা হয় "অ্যালুমিনিয়াম ডিস্ক" বা "অ্যালুমিনিয়াম ডিস্ক।" এগুলি অ্যালুমিনিয়ামের বৃত্তাকার অংশ যা ব্যবহার করা যেতে পারে কারণ বিভিন্ন ধরণের রান্নার পাত্রের বেস বা পিছনে, যার মধ্যে পাত্র রয়েছে, প্যান, এবং স্ট্রেন কুকার.
হুয়াওয়ে অ্যালুমিনিয়ামে স্বাগতম, উচ্চ মানের অ্যালুমিনিয়াম কয়েলের জন্য আপনার বিশ্বস্ত উত্স বিশেষভাবে অ্যালুমিনিয়াম ছাদের শীটগুলির জন্য ডিজাইন করা হয়েছে.
3004 অ্যালুমিনিয়াম কুণ্ডলী একটি অ্যালুমিনিয়াম-ম্যাঙ্গানিজ মিশ্রণ, যা সর্বাধিক ব্যবহৃত অ্যান্টি-মরিচ অ্যালুমিনিয়াম. এই মিশ্রণের শক্তি বেশি নয়. এটি অনুরূপ 3003 প্রায় অ্যালয়গুলির সাথে 1% ম্যাগনেসিয়াম যোগ করা হয়েছে.
এয়ারক্রাফ্ট গ্রেড অ্যালুমিনিয়াম শীট হল এক ধরণের অ্যালুমিনিয়াম খাদ যা মহাকাশ অ্যাপ্লিকেশনগুলিতে ব্যবহারের জন্য বিশেষভাবে ডিজাইন করা হয়েছে. এই শীটগুলি উচ্চ-শক্তির অ্যালুমিনিয়াম খাদ থেকে তৈরি করা হয় যা হালকা ওজনের কিন্তু উড়ানের চাপ এবং স্ট্রেন সহ্য করার জন্য যথেষ্ট শক্তিশালী.
ডায়মন্ড প্লেট অ্যালুমিনিয়াম শীট 4x8 6061-T6 এবং 3003-H14 আকারে পাওয়া যায়. তাদের উচ্চ শক্তি আছে, প্রতিরোধের পরেন, ভারবহন, machinability, জারা প্রতিরোধ, ইত্যাদি. অতএব, নির্মাণে জনপ্রিয়, উত্পাদন, যানবাহন, জাহাজ এবং বিভিন্ন ক্ষেত্র.
5×10 অ্যালুমিনিয়াম শীট অ্যালুমিনিয়াম শীট নির্মাতাদের দ্বারা উত্পাদিত অ্যালুমিনিয়াম শীটের একটি সাধারণ স্পেসিফিকেশন,এটা 5 ফুট চওড়া এবং 10 ফুট লম্বা.
নং 52, ডংমিং রোড, ঝেংঝো, হেনান, চীন
হেনান হুয়াওয়ে অ্যালুমিনিয়াম কো., লিমিটেড, চীন হেনানের বৃহত্তম অ্যালুমিনিয়াম সরবরাহকারীর মধ্যে একটি,আমরা 2001 সালে প্রতিষ্ঠিত, এবং আমাদের আমদানি ও রপ্তানি এবং উচ্চ মানের অ্যালুমিনিয়াম পণ্যগুলিতে সমৃদ্ধ অভিজ্ঞতা রয়েছে
সোম-শনি, 8AM - 5PM
রবিবার: বন্ধ
© কপিরাইট © 2023 হেনান হুয়াওয়ে অ্যালুমিনিয়াম কো., লিমিটেড
সর্বশেষ মন্তব্য
জনাব, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99.50% মিনিট) SIZE:450 X32 X6 MM. আপনার এক 570 EN-AW 1050 ক, পরিমাণ = 3400 কেজি
হ্যালো, আপনি নিম্নলিখিত হিসাবে আইটেম অফার তাই দয়ালু হবে: কয়েল 0,6х1250 (1000)mm EN AW-3105 5tons
হ্যালো, আপনি আমাকে অ্যালুমিনিয়াম প্লেট দিতে পারেন?? আসলে আমার দরকার: 110মিমি x 1700 মিমি x 1700 মিমি 5083 H111 - 21 pcs Next year planed is 177 পিসি
মহান নিবন্ধ. আমি প্রসন্ন ছিলাম, যে আমি এই নিবন্ধটি খুঁজে পেয়েছি. অনেকেই তাই মনে করেন, যে তারা এই বিষয়ে নির্ভরযোগ্য জ্ঞান আছে, কিন্তু এই প্রায়ই ক্ষেত্রে হয় না. তাই আমার আনন্দদায়ক বিস্ময়. আমি অভিভূত. আমি অবশ্যই এই জায়গাটি সুপারিশ করব এবং আরও প্রায়ই ফিরে আসব, নতুন জিনিস দেখতে.
অ্যালুমিনিয়াম ফালা প্রয়োজন