Engineer-grade 5052 Aluminum strip for Armored Cable delivers lightweight, hindi lumalaban sa kaagnasan, non-magnetic. Ideal in H32/H34 tempers for reliable performance.
5052 Aluminum strip for Armored Cable is a magnesium-strengthened, non-heat-treatable alloy widely used for cable armouring in applications that require a balance of mechanical protection, magaan ang timbang, kaagnasan paglaban at magandang formability.
This article explains the alloy fundamentals, production and testing of 5052 Aluminum strip for Armored Cable, summarizes the key physical and functional properties that make it suitable for many cable types, compares it to alternative armour materials, and gives practical guidance for selection, specification and supplier evaluation.
Example material data and typical dimensional ranges are provided to support engineering decisions. Where exact numerical limits matter for a contract or a qualified design, use the mill test report (MTR) and the supplier’s certified property tables.
The designation “5052” signifies a wrought aluminum alloy where magnesium is the primary alloying element.
The 5xxx series alloys are known for their excellent strength-to-weight ratio, superior corrosion resistance, at magandang weldability.
5052 aluminum alloy belongs to the non-heat-treatable Al-Mg system, with composition optimized for cold-work strengthening and environmental durability:
| Elemento | Nilalaman (wt%) | Metallurgical Function |
| Magnesium (Mg) | 2.2–2.8 | Primary solid solution strengthening element; enhances corrosion resistance |
| Chromium (Cr) | 0.15–0.35 | Forms dispersoids (Al₁₈Mg₃Cr₂); controls grain size; improves stress corrosion resistance |
| bakal na bakal (Fe) | ≤0.40 | Impurity control; excessive levels reduce ductility |
| Silicon (Si Si) | ≤0.25 | Impurity; affects castability |
| Tanso (Cu) | ≤0.10 | Minimized to prevent galvanic corrosion susceptibility |
| Mga mangganeso (Mn) | ≤0.10 | Grain structure control |
| Sink (Zn) | ≤0.10 | Limited to prevent stress corrosion |
| Aluminyo (Al) | Balanse | Base matrix |
2mm 5052 H32 Aluminum strip
5052 achieves strength through cold work hardening rather than heat treatment, with tempers designated by the H-series system:
| Temper | Work Hardening Degree | Lakas ng Paghatak (MPa) | Yield Lakas (MPa) | Pagpapahaba (%) | Typical Armor Applications |
| O (Captcha *) | None | 170–215 | ≥65 | ≥25 | Deep-drawn cable components |
| H32 | 1/4 mahirap na, stabilized | 228–280 | ≥193 | ≥12 | Standard cable armor |
| H34 | 1/2 mahirap na | 241–290 | ≥200 | ≥10 | High-strength armor |
| H36 | 3/4 mahirap na | 255–305 | ≥220 | ≥8 | Heavy-duty industrial cables |
| H38 | Full hard | ≥290 | ≥255 | ≥5 | Maximum strength requirements |
| Pag-aari | Halaga | Significance for Cable Armor |
| Densidad ng katawan | 2.68 g/cm³ | 66% lighter than steel; reduces cable weight for installation handling |
| Punto ng Pagtunaw | 607–650°C | Maintains structural integrity up to 150°C operational temperature |
| Thermal kondaktibiti | 138 W/m·K | Facilitates heat dissipation from conductor losses |
| Electrical Resistivity | 0.0495 μΩ·m | Provides electromagnetic shielding (eddy current damping) |
| Pagpapalawak ng Thermal | 23.7×10⁻⁶/K | Compatible with common cable insulation materials |
| Modulus ng Pagkalastiko | 69.3 GPa | Flexibility for cable bending without armor buckling |
Possesses excellent deep drawing and bending characteristics. This allows for the precise, helical wrapping around cable cores without cracking or fracturing, which is essential for efficient manufacturing and reliable performance.
The ability to achieve tight bending radii is also beneficial for cable installation.
Ang produksyon ng 5052 Aluminum strip for Armored Cable is a precision-driven process to ensure consistent quality and performance.
Slitting of 5052 Aluminyo strip
5052 provides a combination of compressive resistance, magbunga ng lakas at ductility that allows effective armour design.
For a given weight, steel often provides higher absolute crush strength, but aluminium’s lighter weight and formability make it attractive where handling and non-magnetic behavior matter.
5052 demonstrates good resistance to atmospheric corrosion and chloride environments, making it suitable for buried or coastal installations when properly protected.
It is not immune to galvanic corrosion when in contact with more noble metals; appropriate isolation and design are required.
Used where non-magnetic armour is required to reduce stray losses and where aluminium conductors are used to match thermal expansion and galvanic behavior.
Spiral or longitudinal 5052 tapes are used to protect multi-core assemblies where moderate mechanical protection and corrosion resistance are sufficient.
5052 tape is used with additional sheath layers for buried cables; for very aggressive soils or industrial chemical exposures, additional protective measures or alternate alloys may be required.
In multi-service environments that require lightweight, corrosion-resistant armour for cable trays and building risers.
Armored cable structure display
| Tampok / Materyal | 5052 Aluminum Strip (H32 Temper) | Galvanized Steel Strip (G.I. bakal na bakal) | Stainless Steel Strip (hal., 304/316) | Pure Aluminum Strip (hal., 1050/1100) | Non-Metallic (hal., Aramid Yarns, Glass Fiber) |
| Densidad ng katawan (g/cm³) | ~2.68 | ~7.85 | ~7.9 – 8.0 | ~2.70 | ~1.3 – 2.5 (varies) |
| Pag iipon ng Timbang | Napakahusay (approx. 65-70% lighter than steel) | None (mabigat) | Mga Maralita (mabigat) | Napakahusay (katulad ng 5052) | Napakahusay (often lighter than 5052) |
| Lakas ng Paghatak | Mabuti na lang (130-190 MPa yield) | Napakahusay (250-400+ MPa yield) | Napakahusay (200-300+ MPa yield) | Fair (30-60 MPa yield) | Good to Excellent (mataas na tiyak na lakas) |
| Paglaban sa Kaagnasan | Napakahusay (esp. marine/industrial) | Fair to Poor (coating vulnerable) | Napakahusay | Mabuti na lang | N/A (non-metallic, no metallic corrosion) |
| Magnetic Properties | Hindi Magnetic | Magnetic | Magnetic (most common grades) | Hindi Magnetic | Hindi Magnetic |
| Electrical kondaktibiti | Mabuti na lang (~35% IACS) | Mga Maralita (varies with coating) | Mga Maralita (compared to Al) | Napakahusay (~60% IACS) | N/A (non-conductive) |
| EMI Shielding | Effective | Limitado (due to magnetic properties) | Limitado (due to magnetic properties) | Effective | N/A (requires metallic layer for shielding) |
| Formability/Ductility | Napakahusay (for wrapping/bending) | Fair (harder, prone to cracking) | Fair (harder, less flexible) | Napakahusay | Napakahusay (mataas na kakayahang umangkop) |
| Installation Ease | Mataas na (lighter, more flexible) | Mababa ang (mabigat, stiff, harder to terminate) | Mababa ang (mabigat, stiff, harder to terminate) | Mataas na | Mataas na (lighter, very flexible) |
| Gastos (Materyal) | Katamtaman | Mababa ang | Mataas na | Low to Moderate | Mataas na |
| Mga Karaniwang Aplikasyon | Telecom, marine, aerospace, control, MV power, data centers | Standard power, general industrial, lower cost | Corrosive chemical plants, specific industrial | Pagbibigay ng Shielding, some low-stress armoring | Specialized fiber optic, magaan ang timbang, extreme flexibility |
| Mga disadvantages | Higher material cost than G.I. steel | Malakas na, magnetic, rusts easily once coating compromised | Malakas na, magnetic, high cost | Lower strength than 5052 | Mataas na gastos, different mechanical protection profile, less crush resistance |
A leading global supplier like Henan Huawei Aluminyo Co., Ltd (HWALU) provides 5052 Aluminum Strip to strict, internationally recognized standards.
Huawei 5052 Aluminyo strip
Ang 5052 aluminum strip has unequivocally established itself as a premier material for cable armoring in the 21st century.
Its unparalleled combination of lightweight, non-magnetic properties, exceptional corrosion resistance, and robust mechanical performance addresses the critical demands of modern cable infrastructure.
From ensuring signal integrity in telecommunications to extending the lifespan of power cables in harsh marine environments, 5052 offers a technically superior and often more cost-effective solution over the cable’s lifecycle compared to traditional steel armor.
As industries continue to push the boundaries of performance and efficiency, the strategic selection of 5052 Aluminum strip for Armored Cable will remain a cornerstone of reliable and advanced cabling systems worldwide.
Q1: Ay 5052 aluminum strip suitable for direct burial cables?
A1: Oo nga, 5052 aluminum’s excellent corrosion resistance, particularly to moisture and soil conditions, makes it highly suitable for direct burial applications. Gayunpaman, proper outer jacketing is still crucial to protect the entire cable assembly.
Q2: Does 5052 aluminum armor offer EMI shielding?
A2: Oo nga, the electrical conductivity of 5052 aluminum strip provides effective electromagnetic interference (EMI) shielding, protecting internal signals from external noise and containing internal interference. It also serves as an effective grounding path.
Q3: How does the weight saving of 5052 aluminum compare to steel armoring?
A3: 5052 aluminum has a density of approximately 2.68 g/cm³, while steel is around 7.85 g/cm³. This means 5052 aluminum armor can reduce the weight of the armoring component by roughly 65-70% compared to steel, leading to substantial overall cable weight reduction.
Q4: Maaari bang 5052 aluminum strip be used in high-temperature environments?
A4: Habang 5052 aluminum retains its strength well at room temperature, like all aluminum alloys, its mechanical properties degrade at elevated temperatures (typically above 200°C). For standard cable operating temperatures, it performs excellently. The cable’s insulation temperature rating will usually be the limiting factor.
Q5: What temper of 5052 is most commonly used for cable armoring?
A5: The H32 temper is widely preferred for cable armoring. It offers an optimal balance of strength and ductility (pagiging formable), allowing for precise wrapping around the cable core without cracking, while providing sufficient mechanical protection. Other tempers like H34 or H38 may be used for specific requirements needing higher strength but potentially lower ductility.
Aluminum foil ay isa sa mga bahagi ng kapangyarihan capacitor kagamitan. Ang pagdaragdag ng aluminyo foil materyal ay hindi lamang maaaring mapabuti ang kalidad ng kapasitor, ngunit din dagdagan ang boltahe paglaban ng kapasitor habang tinitiyak ang pagganap at buhay ng kapasitor.
3003 Ang Aluminum Perforated Sheets ay nakuha sa pamamagitan ng pagsuntok 3003 aluminyo haluang metal sheet at ay madalas na ginagamit sa arkitektura dekorasyon, makinarya sa pagproseso ng pagkain at iba pang mga patlang.
Flexible packaging aluminum foil ay isang manipis na foil na gawa sa aluminyo na karaniwang ginagamit sa packaging ng pagkain at pharmaceutical packaging. Hindi tulad ng hard aluminum foil, nababaluktot packaging aluminyo foil ay malambot at maaaring umangkop sa iba't ibang mga hugis ng mga lalagyan, kaya ito ay malawakang ginagamit para sa packaging ng pagkain at gamot.
1050 aluminyo sheet ay isang uri ng non-init-ginagamot aluminyo plate, na kung saan ay may magandang plasticity, paglaban sa kaagnasan, electrical kondaktibiti at thermal kondaktibiti pagkatapos ng malamig na nagtatrabaho;
Ang bilog na aluminyo para sa mga kagamitan sa pagluluto ay karaniwang tumutukoy sa isang hugis pabilog na piraso o bilog na gawa mula sa aluminyo na ginagamit sa pagmamanupaktura ng iba't ibang uri ng cookware, tulad ng mga kaldero, mga kawali, at mga kagamitan sa pagluluto.
6061 aluminyo sheet ay isang al-si-mg haluang metal na ay strengthened sa pamamagitan ng pag-ulan hardening. 6061 aluminyo ay may mataas na lakas sa timbang ratio, sa itaas ng average na kaagnasan paglaban, magandang machinability, at ay mahusay na angkop para sa hinang.
No.52, Dongming Road, Zhou Zhengzhou, Henan, Tsina
Henan Huawei Aluminyo Co., Ltd, Isa Sa Ang Pinakamalaking Aluminum Supplier Sa China Henan,Kami ay Itinatag Sa 2001, At Mayroon kaming mayaman na karanasan sa pag-import at pag-export at mataas na kalidad na mga produkto ng aluminyo
Mo – Sat, 8SA – 5PM
Linggo: Username or email address *
© Disclaimer © 2023 Henan Huawei Aluminium Co., Ltd
Pinakabagong Mga Komento
Mahal na Sir, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99.50% MIN) SUKAT:450 X32 X6 MM. DIN EN 570 EN-AW 1050 A, QUANTITY=3400KG
Hello po, Gusto mo bang maging kaya mabait upang mag alok ng item tulad ng sumusunod: Coil 0,6х1250 (1000)mm EN AW-3105 5tons
Hello po, Maaari mo bang i alok sa akin ang mga plato ng Aluminium? Actally kailangan ko: 110mm x 1700mm x 1700mm 5083 H111 - 21 pcs Next year planed is 177 mga pc
Mahusay na artikulo. natuwa naman ako, na search ko ang article na ito. Maraming tao ang tila, na mayroon silang maaasahang kaalaman sa paksa, Ngunit ito ay madalas na hindi ang kaso. Kaya ang aking kaaya ayang sorpresa. Bilib na bilib ako. Tiyak na irerekomenda ko ang lugar na ito at i drop sa pamamagitan ng mas madalas, para makakita ng mga bagong bagay.
kinakailangan ng aluminium strip