Discover 5005 Anodized Aluminum Sheet Plate with excellent corrosion resistance, pagiging formable, and attractive finishes. Custom sizes, mga temper, mga kulay, and surface treatments available.
| haluang metal | 5005 |
| Common Tempers | O, H12, H14, H16, H18, H32, H34, H36, H38 |
| Tapos na sa ibabaw | kiskisan ng gil, Nagsipilyo, Pinakintab na, Anodized |
| Anodized Finish | Clear / Pilak / Captcha * / Itim / Pasadyang |
| Mga Pamantayan | ASTM B209/B209M, EN 485, EN 573 |
5005 Anodized Aluminum Sheet Plate combines the inherent properties of 5005 aluminum alloy with the enhanced surface characteristics provided by anodizing.
It is particularly suitable for applications where ibabaw hitsura, paglaban sa kaagnasan, pagiging formable, and long-term decorative performance are important.
The anodizing process further changes the surface of the aluminum rather than simply adding a conventional paint coating.
Under controlled electrochemical conditions, the aluminum surface develops an oxide layer that can improve surface durability, paglaban sa kaagnasan, magsuot ng paglaban, and decorative appearance.
Dahil dito, 5005 anodized aluminum sheet is frequently considered for pag cladding ng arkitektura, interior panels, mga signage, mga kasangkapan sa bahay, mga pabahay ng kagamitan, decorative components, and other visible aluminum products.
Henan Huawei Aluminyo Co., Ltd. supplies aluminum sheet and plate for a wide range of industrial and architectural applications.
Para sa 5005 anodized aluminum projects, Huawei can coordinate alloy, Pamahiin, mga sukat, surface requirements, and downstream processing requirements according to the customer’s application and purchasing specification.
5005 Anodized Aluminum Sheet Plate
5005 aluminyo is a wrought aluminum-magnesium alloy within the 5xxx series.
Its relatively moderate magnesium content provides a combination of strength, paglaban sa kaagnasan, and formability without making the alloy excessively difficult to fabricate.
Unlike 2xxx, 6xxx, and 7xxx series heat-treatable alloys, 5005 does not rely on precipitation hardening to achieve its normal strength levels.
Sa halip, manufacturers control its mechanical properties mainly through cold working and temper processing.
The magnesium content plays an important role in the behavior of 5005 aluminyo. A representative composition is shown below:
| Elemento | Typical Specified Range / Limit |
| Magnesium (Mg) | 0.50–1.10% |
| bakal na bakal (Fe) | ≤0.70% |
| Silicon (Si Si) | ≤0.30% |
| Sink (Zn) | ≤0.25% |
| Mga mangganeso (Mn) | ≤0.20% |
| Tanso (Cu) | ≤0.20% |
| Chromium (Cr) | ≤0.10% |
| Aluminyo (Al) | Balanse |
The exact chemistry should always be checked against the material standard specified for the order.
Published 5005 H34 material data provide the above composition ranges as representative requirements.
The relatively controlled alloy chemistry is particularly important for anodizing applications.
Even when two materials carry the same 5005 pagtatalaga, differences in manufacturing history and surface condition can influence the visual result after anodizing.
One important characteristic of 5005 is that it belongs to the non-heat-treatable aluminum alloy group.
Manufacturers generally use cold working to increase strength. This produces different tempers with different combinations of:
Halimbawa na lang, 5005 O provides a softer condition with higher formability, habang ang 5005 H32 or H34 offers greater strength while retaining useful fabrication characteristics.
Kaya nga, the alloy number alone does not fully define the material. A purchase specification should normally include both:
haluang metal + Temper
5005 can be supplied in several forms depending on production capability and project requirements, kasama na ang:
For anodizing applications, sheet dimensions and surface condition become particularly important because larger visible surfaces make differences in appearance easier to detect.
ASTM B209/B209M covers aluminum and aluminum-alloy flat sheet, coiled sheet, and plate and establishes requirements for applicable alloys and tempers.
Itim 5005 anodized aluminum sheet plate
Anodizing differs fundamentally from painting or conventional organic coating.
During anodizing, the aluminum component becomes the anode in an electrochemical process.
The process converts the aluminum surface into a controlled aluminum oxide layer.
This oxide layer becomes part of the aluminum surface rather than forming a separate paint film on top of it.
Depending on the process, the anodized surface can provide:
For visible architectural products, this combination can be particularly valuable.
One of the main reasons manufacturers select 5005 for anodized sheet is its balance between katamtamang lakas, fabrication performance, paglaban sa kaagnasan, and decorative finishing capability.
Technical data for 5005 specifically identify the alloy as highly suitable for decorative anodizing.
The alloy’s magnesium content also differentiates it from very high-purity aluminum grades.
This allows 5005 to provide useful mechanical performance while retaining an attractive response to anodizing.
Unlike many painted metal surfaces, anodized aluminum retains a recognizable metallic appearance.
Depending on the surface preparation and anodizing process, 5005 can be supplied with finishes such as:
Anodizing converts the surface of 5005 aluminum into a controlled aluminum oxide layer through an electrochemical process.
This treatment improves surface durability, paglaban sa kaagnasan, and decorative appearance.
Para sa 5005 aluminyo sheet, consistent surface preparation and process control are particularly important because anodizing can make differences in the base-metal surface more visible.
The process begins with cleaning to remove rolling oils, mantika, dumi ng tao, at iba pang mga contaminants.
Depending on the required finish, controlled etching may follow to create a more uniform surface texture.
Desmutting removes residual materials before anodizing. Proper pretreatment helps achieve a more consistent anodized surface.
The prepared 5005 aluminum sheet is placed in an electrolytic bath and connected as the anode.
A controlled electrical current forms an aluminum oxide layer on the surface.
Important process parameters include:
Stable process conditions help maintain consistent surface quality and appearance.
5005 aluminum can receive natural or colored anodized finishes according to the application. Common options include:
Brushed and other surface textures can also be prepared before anodizing to achieve specific decorative effects.
For appearance-critical projects, customers should define the required color, Gloss, surface texture, and color tolerance in advance.
After anodizing or coloring, the oxide layer is sealed to improve its resistance to environmental exposure and staining.
The sealing process should match the anodizing system and the intended service environment.
The finished 5005 anodized aluminum sheet plate should undergo dimensional and surface inspections. Key inspection points include:
For architectural and decorative applications, base-material quality is just as important as anodizing process control.
Henan Huawei Aluminyo Co., Ltd. can coordinate alloy, Pamahiin, mga sukat, surface requirements, and anodizing specifications according to customer and project requirements.
Export Packaging for Huawei Aluminum Sheets
5005 anodized aluminum sheet plate can be supplied in different alloy tempers, mga kapal, mga sukat, ibabaw ay nagtatapos, and anodizing conditions.
For architectural and decorative applications, buyers should specify not only the basic alloy and temper but also the kalidad ng ibabaw, anodizing finish, coating thickness, kulay ng kulay, dimensional tolerance, and inspection requirements.
| Parameter | Pagtutukoy / Options |
| aluminyo haluang metal | 5005 |
| Serye ng haluang metal | 5xxx serye |
| Main Alloying Element | Magnesium (Mg) |
| Product Form | Aluminum Sheet, Aluminyo Plate, Cut-to-Length Sheet |
| Temper | O, H12, H14, H16, H18, H24, H32, H34, H36, H38 |
| Ang kapal | Customized according to application |
| Lapad ng katawan | Na customize na |
| Haba | Na customize na |
| Standard Surface | Tapos na ang Mill |
| Decorative Surface | Nagsipilyo, Pinakintab na, Anodized |
| Anodizing Type | Clear / Natural / Colored |
| Anodizing Colors | Pilak, Champagne, Captcha *, Dark Bronze, Itim, Pasadyang |
| Anodizing Quality | Pamantayan / Special Anodizing Quality |
| Anodic Coating | Customer-specified according to application |
| Texture ng Ibabaw | Smooth, Nagsipilyo, Satin, Pasadyang |
| Flatness | According to applicable standard or customer requirement |
| Kapal ng Tolerance | According to applicable standard |
| Lapad ng pagpaparaya | According to applicable standard |
| Length Tolerance | According to applicable standard |
| Applicable Standards | ASTM B209/B209M, EN 485, EN 573 or customer specification |
| Inspection | Dimensional, Mekanikal, Surface and Anodizing Inspection |
| Sertipikasyon | Mill Test Certificate (MTC) available as required |
| Packaging | Export Seaworthy Packaging, Wooden Pallets, Protective Film |
| Pagpapasadya | haluang metal, Temper, Sukat, Ibabaw, Anodizing and Packaging |
Ang mga pisikal na katangian ng 5005 aluminum remain fundamentally those of the aluminum alloy; anodizing primarily modifies the surface rather than significantly changing the bulk properties of the sheet.
Representative physical properties are shown below. Values can vary slightly with alloy chemistry, product condition, temperatura, and applicable standard.
| Pisikal na Ari arian | Karaniwang Halaga |
| Densidad ng katawan | 2.70 g/cm³ |
| Punto ng Pagtunaw | ~655°C |
| Modulus ng Pagkalastiko | ~69.5 GPa |
| Thermal kondaktibiti | ~201 W/m·K |
| Pagpapalawak ng Thermal | ~23.5 × 10⁻⁶/K |
| Electrical kondaktibiti | ~52% IACS |
| Electrical Resistivity | ~0.033 × 10⁻⁶ Ω·m |
Published 5005-H34 data report a density of approximately 2.70 g/cm³, elastic modulus of 69.5 GPa, thermal conductivity of 201 W/m·K, and thermal expansion of 23.5 × 10⁻⁶/K.
5005 aluminum is a non-heat-treatable aluminum alloy. Its mechanical strength mainly depends on the temper condition and the amount of cold working.
As the temper increases from O to H18/H38, tensile strength and yield strength generally increase, while elongation and formability decrease.
| Temper | Lakas ng Paghatak (MPa) | Yield Lakas (MPa) | Pagpapahaba (%) | Typical Performance |
| O | 124 | 41 | 25 | Malambot na, napakahusay na formability |
| H12 | 138 | 131 | 10 | Mababang lakas, magandang formability |
| H14 | 159 | 152 | 6 | Katamtamang lakas, magandang formability |
| H16 | 179 | 172 | 5 | Mas mataas na lakas, moderate formability |
| H18 | 200 | 193 | 4 | Mataas na lakas, lower formability |
| H32 | 138 | 117 | 11 | Good balance of strength and ductility |
| H34 | 159 | 138 | 8 | Balanced strength and formability |
| H36 | 179 | 165 | 6 | Mas mataas na lakas, moderate formability |
| H38 | 200 | 186 | 5 | Mataas na lakas, lower formability |
Typical representative values. Actual properties vary with thickness, product form, manufacturing condition, and applicable standard.
Laptop Used 5005 Anodized Aluminum Sheet Plate
5005 anodized aluminum sheet combines the properties of a 5xxx-series aluminum alloy with the functional and decorative benefits of anodizing.
This combination makes it particularly useful for applications where both material performance and surface appearance matter.
5005 is well suited to decorative anodizing. Its surface can achieve a clean metallic appearance in natural or colored finishes when the base material and anodizing process are properly controlled.
5005 provides good resistance to normal atmospheric corrosion, while the anodized oxide layer provides additional surface protection.
This makes the material suitable for many indoor and outdoor architectural applications.
Anodizing preserves the natural metallic character of aluminum while providing options such as:
Ito ay gumagawa ng 5005 suitable for visible architectural and decorative surfaces.
5005 can be supplied in different tempers, allowing manufacturers to balance strength and forming performance.
Softer tempers are suitable for more demanding forming operations, while harder tempers provide greater rigidity.
The density of approximately 2.70 g/cm³ allows 5005 sheet to reduce structural weight compared with many conventional metal materials.
5005 has good welding characteristics and can be used in fabricated assemblies where welding is required.
Gayunpaman, welding after anodizing can damage the anodized layer around the weld area, so the fabrication sequence should be planned in advance.
The anodized oxide layer provides a harder and more durable surface than untreated aluminum.
This can help the finished product withstand normal handling, pagkakalantad sa kapaligiran, and surface wear.
5005 anodized aluminum sheet combines the lightweight properties of aluminum with a durable and decorative anodized surface.
Its good corrosion resistance, pagiging formable, and attractive appearance make it suitable for architectural, pandekorasyon, pang industriya, and commercial applications.
5005 anodized aluminum sheet is widely used for architectural wall panels, facade cladding, Mga Cover ng Haligi, and decorative exterior elements.
The anodized surface provides a clean metallic appearance while improving resistance to atmospheric exposure.
Common finishes include natural silver, champagne, tanso, dark bronze, and black.
5005 anodized aluminum sheet is suitable for:
Its relatively good formability allows manufacturers to cut, yumuko ka, suntok na, and fabricate the sheet according to project requirements.
5005 anodized aluminum sheet works well for signs, mga nameplate, display panels, and decorative metal panels.
Its smooth anodized surface provides an attractive background for engraving, paglilimbag, lettering, and other decorative processes.
Typical applications include:
The combination of appearance, lightweight construction, and fabrication flexibility makes 5005 suitable for modern interior products.
5005 anodized aluminum sheet can also be used for HVAC panels, mga pabahay ng kagamitan, electrical cabinets, and other industrial components where lightweight construction and surface protection are important.
5005 anodized aluminum sheet can serve selected transportation and commercial interior applications where manufacturers require a combination of low weight, paglaban sa kaagnasan, ibabaw hitsura, and fabrication performance.
The exact temper and thickness should match the forming process and service requirements.
5005 Anodized Aluminum Sheet for Construction
Consistent quality is particularly important for anodized aluminum because the anodizing process can make differences in the underlying aluminum surface more visible.
Huawei Aluminum controls key quality factors from alloy selection and rolling through surface treatment, inspeksyon, and final packaging.
We verify the chemical composition of 5005 aluminum against the agreed material standard and purchase specification.
Key elements include:
Consistent chemical composition helps maintain stable mechanical properties, paglaban sa kaagnasan, fabrication performance, and anodizing response.
Each production order can be inspected according to the required dimensions and tolerances.
| Inspection Item | Kontrol sa Kalidad |
| Ang kapal | Checked against specified tolerance |
| Lapad ng katawan | Checked against order requirements |
| Haba | Checked for dimensional accuracy |
| Flatness | Checked according to specification |
| Squareness | Controlled for sheet applications |
| Ibabaw | Visual inspection |
| Edge condition | Checked after cutting |
The temper directly affects the mechanical performance of 5005 aluminyo.
Huawei can verify the required mechanical properties according to the applicable standard and agreed specification.
Typical tests include:
Test results can be documented in the Material Test Certificate when required.
The anodizing process requires control of both surface appearance and performance.
| Anodizing Control Item | Quality Focus |
| Paghahanda sa ibabaw | Clean and uniform substrate |
| Anodizing process | Stable oxide-layer formation |
| Film thickness | According to project specification |
| Kulay | Consistent with approved sample |
| Gloss | Controlled according to requirement |
| Surface texture | Smooth, satin, nagsipilyo, or specified |
| Pagbubuklod | Improved environmental resistance |
| Hitsura | Uniform color and surface quality |
For large architectural projects, Huawei can coordinate sample approval, color matching, surface inspection, and batch consistency.
Finished anodized sheet requires suitable protection during handling and transportation.
Typical measures include:
Proper packaging helps reduce scratches, mga dent, moisture exposure, and handling damage during international transportation.
Different aluminum alloys can be anodized, but their mechanical properties, ibabaw hitsura, pagiging formable, and typical applications vary.
The following tables provide a practical comparison for selecting anodized aluminum sheet.
| Pag-aari | 5005 | 5052 | 3003 | 6063 | 1100 |
| Serye ng haluang metal | 5xxx | 5xxx | 3xxx | 6xxx | 1xxx |
| Main Alloying Element | Mg | Mg + Cr | Mn | Mg + Si Si | High Al |
| Typical Strength | Katamtaman | Medium–High | Katamtaman | Katamtaman | Mababa ang |
| Formability | Mabuti na lang | Mabuti na lang | Napakahusay | Mabuti na lang | Napakahusay |
| Paglaban sa Kaagnasan | Mabuti na lang | Napakahusay | Mabuti na lang | Good–Excellent | Napakahusay |
| Anodizing Response | Napakahusay | Mabuti na lang | Katamtaman | Napakahusay | Mabuti na lang |
| Decorative Appearance | Napakaganda | Mabuti na lang | Katamtaman | Napakaganda | Mabuti na lang |
| Surface Uniformity | Very Good* | Mabuti na lang | Katamtaman | Napakaganda | Mabuti na lang |
| Typical Product Form | Sheet / Plato | Sheet / Plato | Sheet / Coil | Paglabas / Sheet | Sheet / Foil |
| Architectural Use | Mataas na | Katamtaman | Low–Medium | Mataas na | Katamtaman |
| Mga Karaniwang Aplikasyon | Mga Facade, mga panel, mga signage | Marine, industrial panels | General fabrication | Mga Windows, mga pinto, mga profile | Decorative/general sheet |
| Main Advantage | Balanced anodizing + pagiging formable | Lakas ng loob + paglaban sa kaagnasan | Formability | Paglabas + pag anod ng | Mataas na ductility |
Actual anodized appearance depends strongly on substrate quality, surface preparation, alloy chemistry, rolling condition, and anodizing parameters.
| Anodizing Factor | 5005 | 5052 | 3003 | 6063 | 1100 |
| Natural Anodized Finish | Napakahusay | Mabuti na lang | Katamtaman | Napakahusay | Mabuti na lang |
| Decorative Color | Napakahusay | Mabuti na lang | Katamtaman | Napakahusay | Mabuti na lang |
| Metallic Appearance | Napakahusay | Mabuti na lang | Katamtaman | Napakahusay | Mabuti na lang |
| Surface Uniformity | Napakaganda | Mabuti na lang | Katamtaman | Napakaganda | Mabuti na lang |
| Nagsipilyo + Anodized Finish | Napakahusay | Mabuti na lang | Mabuti na lang | Napakahusay | Mabuti na lang |
| Architectural Suitability | Napakahusay | Mabuti na lang | Katamtaman | Napakahusay | Moderate–Good |
| Appearance-Critical Projects | Highly Suitable | Suitable | Requires tighter control | Highly Suitable | Suitable |
5005 anodized aluminum sheet plate combines the inherent advantages of 5005 aluminum with the enhanced surface performance and appearance provided by anodizing.
Its main advantages include:
For architectural and decorative applications, material selection should consider more than the alloy designation.
haluang metal, Pamahiin, kapal naman, kalidad ng ibabaw, anodizing process, anodic coating, color tolerance, and fabrication requirements should be considered together.
For appearance-critical projects, sample approval and strict control of the aluminum substrate can help maintain consistent anodized appearance between production batches.
It is 5005 aluminum sheet treated with an anodizing process to improve surface durability, paglaban sa kaagnasan, at anyo.
5005 offers good anodizing response, paglaban sa kaagnasan, pagiging formable, and a consistent decorative metallic appearance.
Common options include clear, pilak na pilak, champagne, tanso, dark bronze, and black, with brushed or satin surfaces also available.
Kabilang sa mga karaniwang pag-uugali ang O, H12, H14, H16, H18, H32, H34, H36, at H38. The choice depends on strength and forming requirements.
It is commonly used for facades, pader cladding, mga panel sa kisame, mga signage, panloob na dekorasyon, mga kasangkapan sa bahay, and decorative trims.
Oo nga. Ang kapal, lapad ng katawan, haba, Pamahiin, tapos sa ibabaw, anodizing color, coating requirements, and packaging can be customized.
Sa pangkalahatan, aluminyo sheet na mas makapal kaysa sa 6mm (0.25 pulgada) ay itinuturing na makapal.
6061-T6 Aluminyo sahig plate, karaniwang kilala bilang "diamond plate" o "tread plate", ay isang mahusay na kandidato para sa karamihan ng mga pamamaraan sa pagproseso at parehong panloob at panlabas na mga application.
5754 aluminyo sheet ay may mga katangian ng mahusay na processability, magandang paglaban sa kaagnasan, weldability at madaling pagbuo. Bilang isang wrought haluang metal, 5754 aluminyo sheet ay maaaring nabuo sa pamamagitan ng rolling, paglabas ng mga, at pagkukubli, pero hindi sa pamamagitan ng casting.
5052 Ang Aluminum Disc ay isang Al-Mg haluang metal na kilala para sa mahusay na paglaban sa kaagnasan, mataas na lakas ng pagkapagod, at superior na kakayahang magtrabaho.
Ang 1000 serye aluminyo sheet ay isang serye ng mga purong aluminyo sheet. Ang komposisyon nito ay higit sa lahat aluminyo, na may nilalaman na higit sa 99%.
Ang mga karaniwang haluang metal ng aluminyo foil para sa air duct ay 1000 serye ng mga, 3000 serye at 8000 serye aluminyo foil, na kung saan ay may malakas na kaagnasan paglaban at kahalumigmigan paglaban.
No.52, Dongming Road, Zhou Zhengzhou, Henan, Tsina
Henan Huawei Aluminyo Co., Ltd, Isa Sa Ang Pinakamalaking Aluminum Supplier Sa China Henan,Kami ay Itinatag Sa 2001, At Mayroon kaming mayaman na karanasan sa pag-import at pag-export at mataas na kalidad na mga produkto ng aluminyo
Mo – Sat, 8SA – 5PM
Linggo: Username or email address *
© Disclaimer © 2023 Henan Huawei Aluminium Co., Ltd
Pinakabagong Mga Komento
We need some t111 aluminium plate. We are looking for quarter inch by 4'x8' sheets
Aluminyo 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต
سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر
Dear Sales Team, I hope you are doing well. We are looking to source aluminum products from your company and would appreciate receiving your best quotation for the following: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, at 5 mm Please provide your available standard sheet sizes. Kindly quote the price per sheet and the price per metric ton. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, at 5 mm Please provide your available coil widths, standard coil weights, and inner diameter specifications. Kindly quote the price per metric ton. For both sheets and coils, please include: Available alloys (e.g. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (including sea freight), or alternatively provide both FOB China and CIF Jebel Ali Port, UAE prices. If available, please also send: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. We are interested in establishing a long-term business relationship. Our initial purchase volume is expected to be 100+ metric tons, with the potential for larger and recurring orders if your pricing, kalidad, and service meet our requirements. Thank you for your time. We look forward to receiving your quotation and hope to build a successful long-term partnership. Best regards, Eng.Yousef
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります 又、そのような製品があるようでしたらその重量、価格をおしえていただけますか 現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます 出来ましたらメールでお返事をいただけますか