14ga Aluminum Sheet Supplier

What does Ga mean?

Ga is one of the units for the thickness of aluminum plates, the full name is “GAUGE”, and it can also be replaced by millimeters and inches.

14ga converted to mm is 1.628 mm

14ga converted to inches is 0.0461 inches

How to Calculate Weight of 14ga Aluminum Sheet

Example: A 4×8 Aluminum Sheet, 14ga thick.
Bredde: 4 Foot = 1220mm = 1.22m
Length: 8 Foot = 2440mm = 2.44m
Tykkelse: 14ga.=0.0461 inches=1.628mm

The formula for calculating the weight of the aluminum material is: Calculate the volume of the aluminum plate V=length×width×thickness. Because the density of aluminum is 2.702g/cm³.

The volume of this aluminum plate V=2440*1220*1.628(mm³)=4,846,230.4(mm³)=4,846.2304(cm³)
So the mass of the aluminum plate is 4,846.2304*2.71g=13,133.284384g=13.1333kg.

14ga Aluminum Sheet Supplier

The weight calculation formula of 14gauge aluminum plate per square meter = density × thickness × width × length

Weight per unit area can also be expressed in pounds per square foot and kilograms per square meter.

Weight (oz) of 14ga aluminum :14.48 oz/ft²
Weight (lb) of 14ga aluminum :0.905 lb/ft²
Weight (kg) of 14ga aluminum :0.4105 kg/ft²
Weight (kg/m²) of 14ga aluminum :4.417 kg/m²

For more information： Gauge Thickness Chart

Huawei Aluminum Company also offers you the following hot selling thickness aluminum sheets

The 3mm aluminum sheet weighs 8.1kg (17.86lbs) per square meter.
5.4kg (12lbs) per square metre of 2mm aluminium sheet

What are the thicknesses of the same series of aluminum plates?

6 gauge aluminum sheet
8 gauge aluminum sheet
10 gauge aluminum thickness
11 ga aluminum thickness
12 gauge aluminum plate
14 gauge aluminum plate
16 ga aluminum plate
18 gauge aluminum thickness
20 ga aluminum thickness
22 gauge aluminum plate
24 gauge aluminum plate
26 gauge aluminum thickness
28 gauge aluminum thickness

About more aluminum ga thickness: Gauge Thickness Chart

Aluminium VS Steel

1. Weight difference: the most intuitive difference between aluminum and steel is that the density difference is very obvious. Aluminum is only one-third as dense as steel.
2. Different surface: aluminum will not rust in the air, only natural oxidation, the color is silver-white or dark gray. The natural surface of steel can turn black or rust.
3. Different hardness: Steel is very hard and harder than most objects in nature. Compared with steel, aluminum is much less hard.

Aluminium VS Steel

4. Different magnetism: general steel equipment is attracted by magnets, while aluminum almost has no magnetism.
5. Different resistance measurements: use a multimeter to measure the resistivity of the two materials. The resistivity of aluminum is the lowest among all kinds of metal materials, and the conductivity is higher than that of steel.

What other 14-gauge aluminum plates are you searching for?

14 ga aluminum,14ga aluminium, 14 ga aluminum sheet,14 ga thickness aluminum, 14 gauge thickness aluminum , 14 ga aluminium thickness , 14 gauge thickness aluminum Supplier, 14 ga thickness aluminum sheet, osv.

Note: The larger Ga., the smaller the corresponding millimeters and inches