À la recherche d'un fiable 5052 fournisseur de bandes d'aluminium? Huawei Aluminium propose des épaisseurs personnalisées, largeurs, Tempère, et spécifications des bobines avec un contrôle de qualité strict.
5052 aluminum strip is a widely used aluminum alloy product valued for its combination of mechanical strength, résistance à la corrosion, et flexibilité de fabrication.
As a member of the 5000 série, it uses magnesium as its primary alloying element and belongs to the group of non-heat-treatable aluminum alloys.
Manufacturers can adjust its mechanical properties through cold working and temper control to meet different processing and application requirements.
En production industrielle, aluminum strip offers an additional advantage: its narrow and consistent width makes it convenient for continuous processing, estampillage, profilage, and automated manufacturing.
Buyers can specify thickness, largeur, diamètre intérieur de la bobine, caractère, état des bords, and surface finish according to their production requirements.
Cependant, selecting the right material involves more than confirming the 5052 alloy designation.
Caractère, tolérances dimensionnelles, Qualité de surface, and mechanical properties all influence processing efficiency and finished-product performance.
A reliable 5052 fournisseur de bandes d'aluminium should therefore provide consistent material quality, accurate slitting, suitable technical documentation, and flexible product specifications.

5052 Bande d’aluminium
5052 aluminum is a magnesium-based alloy in the 5000 série. Its typical magnesium content ranges from 2.2% à 2.8%, while chromium is added in a controlled amount to support its corrosion resistance and metallurgical performance.
Unlike heat-treatable alloys such as 6061, 5052 does not rely on solution heat treatment and artificial aging to achieve its strength.
Plutôt, manufacturers primarily adjust its mechanical properties through strain hardening, followed by stabilization where required.
This alloy offers a useful balance of strength, ductilité, et résistance à la corrosion.
It performs particularly well in atmospheric and marine environments, although the actual corrosion performance depends on exposure conditions, condition de surface, and component design.
Aluminum strip refers to a narrow, flat-rolled aluminum product supplied in coil form or as cut lengths.
Manufacturers commonly produce it by slitting wider aluminum coils into narrower widths according to customer specifications.
Although aluminum sheet, bobine, and strip share similar rolling processes, they differ mainly in product dimensions and delivery formats.
| Formulaire de produit | Principales caractéristiques | Typical Supply Form |
| Tôle d’aluminium | Flat aluminum product with specified thickness and width | Individual sheets |
| Bobine d'aluminium | Continuous rolled aluminum material in coil form | Large coils |
| Bande d’aluminium | Narrow-width aluminum material, usually slit from wider coils | Slit coils or cut strips |
Les spécifications de 5052 aluminum strip determine whether the material can meet a customer’s manufacturing and end-use requirements.
Buyers should evaluate alloy designation, caractère, épaisseur, largeur, dimensions de la bobine, qualité des bords, and surface finish before placing an order.
| Paramètre | Spécifications / Gamme typique |
| Nom du produit | 5052 Bande d’aluminium |
| Alloy Designation | 5052 / AA5052 |
| Série d’alliages | 5000 Série |
| Type d'alliage | Aluminum-Magnesium Alloy |
| Élément d'alliage principal | Magnésium (mg) |
| Formulaire de produit | Bande d’aluminium / Slit Coil |
| Tempères communs | O, H12, H14, H16, H18, H22, H24, H32, H34, H36, H38 |
| Plage d'épaisseur | 0.15–10.0 mm, depending on temper and supplier |
| Common Thickness | 0.5–6,0 mm |
| Plage de largeur | 20–2,650 mm, depending on production capability |
| Common Standard Widths | 1,000 / 1,250 / 1,219 / 1,500 / 1,524 millimètre |
| Narrow Strip Width | Personnalisé, commonly produced by precision slitting |
| Diamètre intérieur de la bobine (ID) | Communément 305 / 405 / 406 / 505 / 508 / 610 millimètre, subject to availability |
| Coil Outer Diameter (OD) | Customized according to coil weight and handling requirements |
| Poids de la bobine | Customized according to width, épaisseur, and customer requirements |
| Edge Type | Mill Edge / Slit Edge |
| Finition de surface | Finition du moulin; other finishes subject to agreement |
| Protection de surface | Bare Surface / PE or PVC Film, if specified |
| Traction | Approximately 170–305 MPa, depending on temper and thickness |
| Élasticité | Approximately 65–255 MPa, depending on temper and thickness |
| Élongation | Approximately 3–25%, depending on temper and thickness |
| Densité | Environ 2.68 g/cm³ |
| Module d’élasticité | Environ 70.3 GPa |
| Résistance à la corrosion | Good atmospheric and marine corrosion resistance |
| Formabilité | Bien, particularly in O temper |
| Soudabilité | Good with suitable welding procedures |
| Normes applicables | ASTM B209, DANS 485 Série, DANS 573-3, Go/T 3880 |
La composition chimique de 5052 aluminum determines many of its important characteristics, y compris la force, résistance à la corrosion, Formabilité, and welding performance.

5052 Aluminum Strip With Bluefilm
The following table presents the commonly specified chemical composition limits for 5052 aluminium.
Composition chimique de 5052 Aluminium (Wt.%)
| Élément | Symbol | Composition |
| Aluminium | Al | Reste |
| Magnésium | mg | 2.2–2.8 |
| Chrome | Cr | 0.15–0,35 |
| Silicium | Et | ≤0,25 |
| Le fer | Fe | ≤0,40 |
| Cuivre | Cu | ≤0,10 |
| Manganèse | Mn | ≤0,10 |
| Zinc | Zn | ≤0,10 |
| Les autres, Chaque | — | ≤0,05 |
| Les autres, Total | — | ≤0.15 |
*Note: Values are representative composition limits commonly associated with 5052 aluminium.
The applicable standard and its specified edition should govern contractual acceptance.
Les propriétés mécaniques de 5052 aluminum strip change significantly with its temper.
Annealed O temper offers high ductility and excellent formability, while strain-hardened H tempers provide higher strength and hardness.
The following table provides representative mechanical property ranges for commonly used tempers.
Propriétés mécaniques de 5052 Aluminum by Temper
| Caractère | Traction (Mpa) | Élasticité (Mpa) | Élongation (%) | Dureté Brinell (HB) |
| O | 170–215 | ≥65 | 14–20 | Environ. 47 |
| H32 | 215–265 | ≥160 | 4–10 | Environ. 60 |
| H34 | 235–285 | ≥180 | 3–8 | Environ. 68 |
| H36 | 255–305 | ≥200 | 2–4 | Environ. 73 |
| H38 | ≥270 | ≥220 | 2–4 | Environ. 77 |
Reference values compiled from published 5052 alloy datasheets. Actual specified limits and elongation depend on thickness, forme de produit, méthode d'essai, et norme applicable.
Hardness values are typical rather than universal acceptance requirements.
Several factors should guide temper selection:
For narrow aluminum strips used in continuous stamping or roll forming, temper consistency is particularly important.
Variations in hardness or elongation can affect feeding stability, retour élastique, précision dimensionnelle, and forming quality.
5052 aluminum combines low density with useful thermal and electrical properties.
Although it does not offer the same electrical conductivity as commercially pure aluminum, it provides a good balance of physical and mechanical characteristics for industrial applications.
Propriétés physiques de 5052 Aluminium
| Propriété | Valeur typique | Unité |
| Densité | 2.68 | g/cm³ |
| Module d’élasticité | 70.3 | GPa |
| Conductivité thermique | 138 | W/(m·K) |
| Conductivité électrique | Environ. 35 | % SIGC |
| La capacité thermique spécifique | Environ. 900 | J/(kg·K) |
| Thermal Expansion Coefficient | Environ. 23.8 | ×10⁻⁶/K |
| Plage de fusion | 607–649 | °C |
| Coefficient de Poisson | 0.33 | — |
These properties have several practical implications:
5052 aluminum strip combines mechanical strength, résistance à la corrosion, et flexibilité de fabrication.
These characteristics make it a practical choice for manufacturers that need lightweight materials with reliable performance in different operating environments.
5052 aluminum provides good resistance to atmospheric corrosion, humidité, and many marine environments.
Its natural oxide film protects the underlying metal, while its magnesium-based composition supports corrosion performance.
This advantage makes it suitable for marine fittings, outdoor equipment, vehicle components, et enceintes industrielles.
Avec une densité d'environ 2.68 g/cm³, 5052 aluminum offers useful mechanical strength without adding excessive weight.
Different tempers allow manufacturers to adjust the balance between strength and ductility.
This combination helps reduce component weight while maintaining the required mechanical performance in transportation and industrial applications.
5052 la bande d'aluminium supporte la flexion, estampillage, profilage, and other common fabrication processes.
O temper provides high ductility for complex forming, while H32 and H34 offer greater strength for moderately formed components.
Choosing the appropriate temper helps manufacturers reduce forming defects and maintain dimensional accuracy.
The alloy supports common aluminum welding methods, y compris TIG et MIG.
Its weldability makes it useful for fabricated tanks, boîtiers d'équipement, composants marins, and other assembled structures.
Proper filler metal selection and welding procedures help maintain joint quality and account for heat-affected-zone softening.
5052 aluminum offers good resistance to repeated loading compared with many general-purpose aluminum alloys.
This characteristic benefits components exposed to vibration and cyclic mechanical stress, including vehicle panels and industrial equipment parts.
5052 aluminum strip can undergo various surface treatments, including anodizing, peinture, et revêtement, en fonction de l'application.
These treatments can improve appearance, protection des surfaces, et résistance à l’exposition environnementale.
For decorative anodizing, cependant, buyers should confirm the required surface grade and appearance criteria with the supplier and finishing processor.

Typical-Applications-of-5052-Aluminum-Strip
The combination of strength, résistance à la corrosion, Faible densité, et la flexibilité de fabrication rend 5052 aluminum strip suitable for many industrial and commercial products.
Its narrow-width coil form also supports continuous stamping, profilage, and automated component manufacturing.
5052 aluminum performs well in many marine atmospheric environments because of its corrosion resistance and relatively high strength.
Manufacturers use it for selected marine components that require lightweight construction and reliable environmental performance.
Les applications typiques incluent:
The low density and good formability of 5052 aluminum help manufacturers reduce vehicle weight while maintaining useful mechanical performance.
Its strip form is particularly convenient for continuous fabrication and precision component production.
Les applications typiques incluent:
5052 aluminum strip offers a practical combination of strength, construction légère, and corrosion resistance for electronic and electrical equipment.
Its formability allows manufacturers to produce enclosures and precision sheet-metal components.
Les applications typiques incluent:
Industrial equipment often requires materials that can withstand mechanical handling, exposition environnementale, and repeated operation.
5052 aluminum strip meets many of these requirements through its strength and fabrication characteristics.
Les applications typiques incluent:
5052 aluminum is used in selected tanks, conteneurs, and fabricated storage equipment because of its corrosion resistance, soudabilité, et formabilité.
Les applications typiques incluent:
5052 aluminum strip can support architectural fabrication where strength, résistance à la corrosion, and surface finishing are important.
Les applications typiques incluent:
Selecting the right aluminum alloy requires balancing strength, résistance à la corrosion, Formabilité, traitement de surface, et coût.
Although several aluminum alloys can be supplied in strip form, their compositions and mechanical characteristics lead to different application advantages.
The following table compares 5052 with four commonly considered aluminum alloys.
| Comparaison | 5052 | 5005 | 5083 | 3003 | 6061 |
| Série d’alliages | 5000 | 5000 | 5000 | 3000 | 6000 |
| Éléments d'alliage principal | mg, Cr | mg | mg, Mn | Mn | mg, Et |
| Traitabilité thermique | Ne peut pas être traité thermiquement | Ne peut pas être traité thermiquement | Ne peut pas être traité thermiquement | Ne peut pas être traité thermiquement | Traitement thermique |
| Niveau de force | Moyen à élevé | Moyen | Haut | Faible à moyen | High in T6 |
| Résistance à la corrosion | Excellente | Bon à excellent | Excellente | Bien | Bien |
| Formabilité | Bien | Bien | Modéré | Excellente | Modéré |
| Soudabilité | Bien | Bien | Bien | Bien | Bien, with strength considerations |
| Anodizing Performance | Bien | Very good for decorative applications | Good for protective finishes | Generally less preferred for decorative anodizing | Bien, but appearance may vary |
| Applications typiques | Marine parts, enclos, transport | Décoration architecturale, anodized components | Ouvrages marins, heavy-duty fabrication | Fabrication générale, CVC, ustensiles de cuisine | Les composants structuraux, machinerie |
Note: These are qualitative comparisons. Les performances réelles dépendent du tempérament, épaisseur, forme de produit, traitement, et les conditions environnementales.

Huawei emballé 5052 Bande d’aluminium
Choosing a reliable 5052 aluminum strip supplier helps ensure consistent material quality, accurate dimensions, and stable delivery.
Buyers should consider manufacturing experience, contrôle de qualité, capacités de personnalisation, and export services.
Henan Huawei Aluminium Co., Ltée. is an experienced aluminum manufacturer and supplier established in 2001.
Avec plus 20 years of industry experience, the company supplies aluminum sheets, Bobines, bandes, déjoue, cercles, and embossed products to customers in more than 70 pays.
Huawei Aluminum can provide 5052 aluminum strip solutions for marine components, Matériel de transport, boîtiers électriques, et fabrication industrielle générale.
Contact Huawei Aluminum with your required alloy temper, épaisseur, largeur, quantité, and application details to receive technical support and a free quotation.
For strip, quality control must confirm two things: that the material is the alloy and temper it claims to be, and that every coil will run properly on your line.
| Scène | Control Points |
| Incoming material | Ingot purity and magnesium source checked and recorded by batch |
| Fusion | Spectrometer analysis, magnesium and chromium adjusted before casting, oxide control |
| Casting | Structure and surface condition |
| Roulement | Thickness gauge, platitude, condition de surface |
| Annealing and stabilizing | Temperature and time records, hardness consistency |
| Refendage | Largeur, état des bords, hauteur de bavure, courbure |
| Emballage | Protection, étiquetage, coil identification |
| Test | But | Typical Method |
| Composition chimique | Confirm 5052 limits, especially Mg and Cr | Optical emission spectrometry |
| Traction, rendement, élongation | Verify the ordered temper | Tensile testing |
| Dureté | Check uniformity within and between coils | Hardness tester |
| Bend test | Confirm formability for the temper | Bend test to agreed radius |
| Épaisseur | Confirm gauge and uniformity | Micrometer or thickness gauge |
| Width and camber | Ensure feeding and forming accuracy | Calipers, straightedge methods |
| Platitude | Prevent stamping and press-brake issues | Flatness gauge |
| Aspect des surfaces | Detect scratches, taches, marques de rouleaux, huile | Inspection visuelle |
Common references include:
Important: state only the standards and certificates your company actually holds, and be ready to provide copies. For marine and pressure uses, an unsupported claim is a serious risk.
5052 aluminum strip is a versatile Al-Mg alloy product known for its corrosion resistance, moderate-to-high strength, Bonne formabilité, et soudabilité.
These properties make it suitable for marine components, Matériel de transport, boîtiers électriques, fabrication industrielle, et applications architecturales.
Selecting the right temper and dimensions is essential for achieving the required balance between strength and formability.
Buyers should also pay attention to chemical composition, propriétés mécaniques, tolérances dimensionnelles, Qualité de surface, and coil packaging.
Working with an experienced supplier such as Henan Huawei Aluminium Co., Ltée. can help buyers source customized 5052 aluminum strip and coordinate technical requirements for different applications.
5052 aluminum strip is a 5xxx-series Al-Mg alloy product known for its good corrosion resistance, force, Formabilité, et soudabilité.
Oui. It offers good resistance to atmospheric and marine environments, making it suitable for many outdoor and marine applications.
Les tempéraments communs incluent o, H32, H34, H36, et H38. O temper provides better formability, while H tempers offer higher strength.
Oui. It has good bending and welding performance. The appropriate temper, rayon de courbure, and welding method should be selected according to the application.
5083 generally offers higher strength for demanding marine and structural applications, pendant que 5052 provides a good balance of strength, Formabilité, et résistance à la corrosion.
Épaisseur, largeur, and coil dimensions can be customized according to supplier capabilities and order requirements.
Provide the required temper, épaisseur, largeur, quantité, coil specifications, and application details. The supplier can then evaluate your requirements and provide a quotation.
Si vous recherchez des bobines d'aluminium prépeint de qualité supérieure avec différents modèles et spécifications d'alliage, Huawei Aluminium est votre choix ultime.
5754 la bobine d’aluminium est un alliage d’élément Al-Mg typique, qui appartient à la plaque d’aluminium antirouille aluminium-magnésium.
Huawei aluminium est l’un des principaux fabricants de bandes d’aluminium en Chine, spécialisée dans la production et la vente de bobines d’aluminium, bandes et feuilles d’aluminium.
Explorez les propriétés uniques, processus de manufacture, et de vastes applications de 1060 Aluminium. Découvrez pourquoi cet alliage de haute pureté est essentiel dans l'emballage, électronique, CVC, et plus encore.
4La feuille d’aluminium x8 est une taille commune de feuille d’aluminium, également connu sous le nom de feuille d’aluminium de taille standard, Appelée feuille standard.
Notre 3003 Des produits en aluminium ont été exportés vers l'Australie, Maroc, Syrie, Koweït, Turquie, Arabie Saoudite, EAU, Irak, Jordanie, Allemagne, Pologne, Espagne, Brésil, etc. Nous vous souhaitons la bienvenue pour visiter notre usine.
N°52, Route de Dongming, Zhengzhou, Henan, Chine
Henan Huawei Aluminium Co., Ltée, L’un des plus grands fournisseurs d’aluminium en Chine Henan,Nous sommes établis en 2001, et nous avons une riche expérience dans l’importation et l’exportation et les produits en aluminium de haute qualité
Lun – Sam, 8AM – 17h
Dimanche: Fermé
© Copyright © 2023 Henan Huawei Aluminium Co., Ltée
Derniers Commentaires
Demander un devis pour: Et AW 1050 doux H 111 (3.0255 PL) . réfléchissant 20% / vitré électrolytiquement, anodisé incolore 8000 kg 1.5 X 1000 X 2000 Livraison: DAP-CH-Zurich Profalu AG Schlössligasse 1 / CH-7076 Parpan
Bonjour, Pour une production artistique, je recherche une feuille d'aluminium plus épaisse qui ne se déchire pas facilement, éventuellement coloré. Largeur minimale env. 30 cm. Est-il possible de voir certains échantillons de différentes épaisseurs? Pas plus épais que 1 millimètre. Si vous le pouvez, vous m'aiderez énormément! J'aimerais avoir de vos nouvelles. Gert Fris, artiste plasticien à Enschede
Nous avons besoin d'une plaque d'aluminium T111. Nous recherchons des feuilles d'un quart de pouce par 4'x8'
Aluminium 5754 H111 หนา 8 mm กว้าง x ยาว : 4 X 6 pied
Bonjour, très bien, j'appelle d'Iran, nous avons besoin d'une feuille d'or de 12 microns, 61 cm de large, environ 35 000 mètres par mois.