5052 알루미늄 스트립 공급업체

집 » 제품 » 알루미늄 스트립 » 5052 알루미늄 스트립 공급업체

Looking for a reliable 5052 aluminum strip supplier? Huawei Aluminum offers customized thicknesses, 너비, 성질, and coil specifications with strict quality control.

5052 알루미늄 스트립 공급업체

  • 두께 (mm): 0.20 – 0.50 (공차: ± 5%)
  • 너비 (mm): 20 – 800 (공차: ± 1.0)
  • 길이: C
  • 재료: 알루미늄 망간
  • 템퍼링: 풀 소프트 (o 상태) 반 하드 (H24) 전체 하드 (h18)

  E-mail   Wtatsapp   Inquiry

목차 보이다

1. 소개

5052 aluminum strip is a widely used aluminum alloy product valued for its combination of mechanical strength, 내식성, 및 제작 유연성.

As a member of the 5000 시리즈, it uses magnesium as its primary alloying element and belongs to the group of non-heat-treatable aluminum alloys.

Manufacturers can adjust its mechanical properties through cold working and temper control to meet different processing and application requirements.

산업 생산에서, aluminum strip offers an additional advantage: its narrow and consistent width makes it convenient for continuous processing, 스탬핑, 롤 포밍, and automated manufacturing.

Buyers can specify thickness, 너비, 코일 내경, 성질, 가장자리 조건, and surface finish according to their production requirements.

하지만, selecting the right material involves more than confirming the 5052 alloy designation.

성질, 치수 공차, 표면 품질, and mechanical properties all influence processing efficiency and finished-product performance.

A reliable 5052 aluminum strip supplier should therefore provide consistent material quality, accurate slitting, suitable technical documentation, and flexible product specifications.

5052 Aluminum Strip

5052 알루미늄 스트립

2. 무엇입니까 5052 알루미늄 스트립?

2.1 개요 5052 알루미늄 합금

5052 aluminum is a magnesium-based alloy in the 5000 시리즈. Its typical magnesium content ranges from 2.2% 에게 2.8%, while chromium is added in a controlled amount to support its corrosion resistance and metallurgical performance.

Unlike heat-treatable alloys such as 6061, 5052 does not rely on solution heat treatment and artificial aging to achieve its strength.

대신에, manufacturers primarily adjust its mechanical properties through strain hardening, followed by stabilization where required.

This alloy offers a useful balance of strength, 연성, 및 내식성.

It performs particularly well in atmospheric and marine environments, although the actual corrosion performance depends on exposure conditions, 표면 상태, and component design.

2.2 What Is Aluminum Strip?

Aluminum strip refers to a narrow, flat-rolled aluminum product supplied in coil form or as cut lengths.

Manufacturers commonly produce it by slitting wider aluminum coils into narrower widths according to customer specifications.

Although aluminum sheet, 코일, and strip share similar rolling processes, they differ mainly in product dimensions and delivery formats.

제품형태 주요특징 Typical Supply Form
알루미늄 시트 Flat aluminum product with specified thickness and width Individual sheets
알루미늄 코일 Continuous rolled aluminum material in coil form Large coils
알루미늄 스트립 Narrow-width aluminum material, usually slit from wider coils Slit coils or cut strips

3. 5052 Aluminum Strip Specifications

사양 5052 aluminum strip determine whether the material can meet a customer’s manufacturing and end-use requirements.

Buyers should evaluate alloy designation, 성질, 두께, 너비, 코일 치수, 가장자리 품질, and surface finish before placing an order.

3.1 Core Specifications of 5052 알루미늄 스트립

매개 변수 명세서 / 일반적인 범위
제품 이름 5052 알루미늄 스트립
Alloy Designation 5052 / AA5052
합금 시리즈 5000 시리즈
합금 유형 Aluminum-Magnesium Alloy
주요 합금 요소 마그네슘 (마그네슘)
제품형태 알루미늄 스트립 / Slit Coil
일반적인 성미 영형, H12, H14, H16, H18, H22, H24, H32, H34, H36, H38
두께 범위 0.15–10.0 mm, depending on temper and supplier
Common Thickness 0.5-6.0mm
폭 범위 20–2,650 mm, depending on production capability
Common Standard Widths 1,000 / 1,250 / 1,219 / 1,500 / 1,524 mm
Narrow Strip Width 주문을 받아서 만들어진, commonly produced by precision slitting
코일 내경 (아이디) 천하게 305 / 405 / 406 / 505 / 508 / 610 mm, subject to availability
Coil Outer Diameter (최저가) Customized according to coil weight and handling requirements
코일 무게 Customized according to width, 두께, and customer requirements
Edge Type Mill Edge / Slit Edge
표면 마감 밀 마무리; other finishes subject to agreement
표면 보호 Bare Surface / PE or PVC Film, if specified
인장 강도 Approximately 170–305 MPa, depending on temper and thickness
항복 강도 Approximately 65–255 MPa, depending on temper and thickness
신장 Approximately 3–25%, depending on temper and thickness
밀도 약 2.68 g/cm³
탄성계수 약 70.3 증권 시세 표시기
내식성 Good atmospheric and marine corrosion resistance
성형성 좋은, particularly in O temper
용접성 Good with suitable welding procedures
적용 가능한 표준 ASTM B209, 에 485 시리즈, 에 573-3, GB/T 3880

4. 화학 성분 5052 알루미늄

화학 성분의 5052 aluminum determines many of its important characteristics, 힘 포함, 내식성, 성형성, and welding performance.

5052 Aluminum Strip With Bluefilm

5052 Aluminum Strip With Bluefilm

4.1 화학 성분표

The following table presents the commonly specified chemical composition limits for 5052 알류미늄.

화학 성분 5052 알루미늄 (wt.%)

요소 Symbol 구성
알루미늄 알 나머지
마그네슘 마그네슘 2.2–2.8
크로뮴 크롬 0.15–0.35
규소 시 ≤0.25
철 철 ≤0.40
구리 구 ≤0.10
망간 미네소타 ≤0.10
아연 증권 시세 표시기 ≤0.10
다른, 각 — ≤0.05
다른, 합계 — ≤0.15

*메모: Values are representative composition limits commonly associated with 5052 알류미늄.

The applicable standard and its specified edition should govern contractual acceptance.

5. 기계적 및 물리적 특성 5052 알루미늄 스트립

5.1 기계적 성질 5052 Aluminum Strip by Temper

기계적 특성 5052 aluminum strip change significantly with its temper.

Annealed O temper offers high ductility and excellent formability, while strain-hardened H tempers provide higher strength and hardness.

The following table provides representative mechanical property ranges for commonly used tempers.

기계적 성질 5052 Aluminum by Temper

성질 인장 강도 (MPa) 항복 강도 (MPa) 신장 (%) 브리넬 경도 (증권 시세 표시기)
영형 170-215 ≥65 14–20 대략. 47
H32 215–265 ≥160 4–10 대략. 60
H34 235–285 ≥180 3–8 대략. 68
H36 255–305 ≥200 2-4 대략. 73
H38 ≥270 ≥220 2-4 대략. 77

Reference values compiled from published 5052 alloy datasheets. Actual specified limits and elongation depend on thickness, 제품 형태, 테스트 방법, 및 적용 가능한 표준.

Hardness values are typical rather than universal acceptance requirements.

Several factors should guide temper selection:

  • 오지: Its low strength and high ductility make it suitable for deep drawing, complex bending, and components requiring substantial deformation.
  • H32 성미: Provides a practical balance between strength and formability. It is widely used in general sheet-metal fabrication, 운송 부품, and equipment housings.
  • H34 Temper: Offers higher strength than H32 while retaining useful formability for moderately demanding applications.
  • H36 and H38 Tempers: Provide higher strength and hardness but lower elongation. They are more appropriate for components that require rigidity and undergo limited forming.

For narrow aluminum strips used in continuous stamping or roll forming, temper consistency is particularly important.

Variations in hardness or elongation can affect feeding stability, 스프링백, 치수 정확도, and forming quality.

5.2 물리적 특성 5052 알루미늄 스트립

5052 aluminum combines low density with useful thermal and electrical properties.

Although it does not offer the same electrical conductivity as commercially pure aluminum, it provides a good balance of physical and mechanical characteristics for industrial applications.

물리적 특성 5052 알루미늄

재산 전형적인 가치 단위
밀도 2.68 g/cm³
탄성계수 70.3 증권 시세 표시기
열 전도성 138 W/(m·K)
전기 전도도 대략. 35 % 증권 시세 표시기
비열용량 대략. 900 J/(kg·K)
Thermal Expansion Coefficient 대략. 23.8 ×10⁻⁶/K
녹는 범위 607–649 °C
포아송의 비율 0.33 —

These properties have several practical implications:

  • 낮은 밀도: At approximately 2.68 g/cm³, 5052 aluminum helps reduce component weight compared with steel.
  • 열 성능: Its thermal conductivity supports applications involving heat transfer, 장비 하우징, and heat exchanger components.
  • Electrical performance: Its conductivity is suitable for selected electrical components, although pure aluminum and copper are generally preferred when maximum conductivity is the priority.
  • 열 안정성: Its thermal expansion should be considered when designing components exposed to temperature changes.

6. 주요 장점 5052 알루미늄 스트립

5052 aluminum strip combines mechanical strength, 내식성, 및 제작 유연성.

These characteristics make it a practical choice for manufacturers that need lightweight materials with reliable performance in different operating environments.

6.1 우수한 내식성

5052 aluminum provides good resistance to atmospheric corrosion, 수분, and many marine environments.

Its natural oxide film protects the underlying metal, while its magnesium-based composition supports corrosion performance.

This advantage makes it suitable for marine fittings, outdoor equipment, vehicle components, 및 산업용 인클로저.

6.2 높은 강도 대 중량 비율

대략 밀도가 있습니다 2.68 g/cm³, 5052 aluminum offers useful mechanical strength without adding excessive weight.

Different tempers allow manufacturers to adjust the balance between strength and ductility.

This combination helps reduce component weight while maintaining the required mechanical performance in transportation and industrial applications.

6.3 Good Formability and Bendability

5052 알루미늄 스트립은 굽힘을 지원합니다., 스탬핑, 롤 포밍, and other common fabrication processes.

O temper provides high ductility for complex forming, while H32 and H34 offer greater strength for moderately formed components.

Choosing the appropriate temper helps manufacturers reduce forming defects and maintain dimensional accuracy.

6.4 Reliable Welding Performance

The alloy supports common aluminum welding methods, TIG와 MIG를 포함한.

Its weldability makes it useful for fabricated tanks, 장비 하우징, 해양 부품, and other assembled structures.

Proper filler metal selection and welding procedures help maintain joint quality and account for heat-affected-zone softening.

6.5 좋은 피로 저항

5052 aluminum offers good resistance to repeated loading compared with many general-purpose aluminum alloys.

This characteristic benefits components exposed to vibration and cyclic mechanical stress, including vehicle panels and industrial equipment parts.

6.6 Versatile Surface Finishing

5052 aluminum strip can undergo various surface treatments, including anodizing, 그림, 그리고 코팅, 응용 프로그램에 따라.

These treatments can improve appearance, 표면 보호, 환경 노출에 대한 저항성.

For decorative anodizing, 하지만, buyers should confirm the required surface grade and appearance criteria with the supplier and finishing processor.

Typical-Applications-of-5052-Aluminum-Strip

Typical-Applications-of-5052-Aluminum-Strip

7. 전형적인 응용 5052 알루미늄 스트립

The combination of strength, 내식성, 저밀도, 그리고 제작 유연성으로 인해 5052 aluminum strip suitable for many industrial and commercial products.

Its narrow-width coil form also supports continuous stamping, 롤 포밍, and automated component manufacturing.

7.1 Marine and Shipbuilding

5052 aluminum performs well in many marine atmospheric environments because of its corrosion resistance and relatively high strength.

Manufacturers use it for selected marine components that require lightweight construction and reliable environmental performance.

일반적인 응용 분야는 다음과 같습니다.:

  • Boat fittings and fabricated components.
  • Marine equipment covers and housings.
  • Interior panels and trim components.
  • Protective enclosures and brackets.

7.2 자동차 및 운송

The low density and good formability of 5052 aluminum help manufacturers reduce vehicle weight while maintaining useful mechanical performance.

Its strip form is particularly convenient for continuous fabrication and precision component production.

일반적인 응용 분야는 다음과 같습니다.:

  • Vehicle body panels and interior components.
  • Truck and trailer panels.
  • Fuel tank components, where permitted by the design.
  • Protective covers and brackets.
  • Transportation equipment housings.

7.3 Electronics and Electrical Equipment

5052 aluminum strip offers a practical combination of strength, 경량 구조, and corrosion resistance for electronic and electrical equipment.

Its formability allows manufacturers to produce enclosures and precision sheet-metal components.

일반적인 응용 분야는 다음과 같습니다.:

  • Electrical cabinet components.
  • Electronic equipment housings.
  • Control panel covers.
  • Instrument enclosures.
  • Protective shielding and structural parts.

7.4 Industrial Equipment and Machinery

Industrial equipment often requires materials that can withstand mechanical handling, 환경 노출, and repeated operation.

5052 aluminum strip meets many of these requirements through its strength and fabrication characteristics.

일반적인 응용 분야는 다음과 같습니다.:

  • Machine covers and protective panels.
  • Equipment housings.
  • Fabricated brackets and mounting components.
  • Ventilation equipment parts.
  • Industrial enclosures and guards.

7.5 Pressure Vessels and Storage Equipment

5052 aluminum is used in selected tanks, 컨테이너, and fabricated storage equipment because of its corrosion resistance, 용접성, 및 성형성.

일반적인 응용 분야는 다음과 같습니다.:

  • Fuel and liquid storage tanks.
  • Selected chemical storage containers.
  • Transport tank components.
  • Welded industrial vessels.

7.6 건축 및 장식 구성 요소

5052 aluminum strip can support architectural fabrication where strength, 내식성, and surface finishing are important.

일반적인 응용 분야는 다음과 같습니다.:

  • Building trim and decorative strips.
  • Exterior equipment covers.
  • Fabricated architectural components.
  • Anodized or coated panels and profiles.

8. 5052 알루미늄 스트립 대. 다른 알루미늄 합금

Selecting the right aluminum alloy requires balancing strength, 내식성, 성형성, 표면 처리, 비용.

Although several aluminum alloys can be supplied in strip form, their compositions and mechanical characteristics lead to different application advantages.

8.1 Comparison of Key Characteristics

The following table compares 5052 with four commonly considered aluminum alloys.

비교 5052 5005 5083 3003 6061
합금 시리즈 5000 5000 5000 3000 6000
주요 합금 요소 마그네슘, 크롬 마그네슘 마그네슘, 미네소타 미네소타 마그네슘, 시
열처리성 비열처리 가능 비열처리 가능 비열처리 가능 비열처리 가능 열처리 가능
강도 수준 중간에서 높음 중간 높은 낮음 ~ 중간 High in T6
내식성 훌륭한 우수한 것입니다 훌륭한 좋은 좋은
성형성 좋은 좋은 온화한 훌륭한 온화한
용접성 좋은 좋은 좋은 좋은 좋은, with strength considerations
Anodizing Performance 좋은 Very good for decorative applications Good for protective finishes Generally less preferred for decorative anodizing 좋은, but appearance may vary
일반적인 애플리케이션 Marine parts, 인클로저, 수송 건축 장식, anodized components 해양 구조물, heavy-duty fabrication 일반적인 제조, HVAC, 조리 기구 구조적 구성 요소, 기계

메모: These are qualitative comparisons. 실제 성능은 성격에 따라 다릅니다., 두께, 제품 형태, 처리, 및 환경 조건.

Huawei Packaged 5052 Aluminum Strip

화웨이 포장 5052 알루미늄 스트립

9. China High-Quality 5052 Aluminum Strip Supplier – Huawei Aluminum

Choosing a reliable 5052 aluminum strip supplier helps ensure consistent material quality, accurate dimensions, and stable delivery.

Buyers should consider manufacturing experience, 품질 관리, 맞춤화 기능, and export services.

허난 화웨이 알루미늄 유한 회사, 주식 회사. is an experienced aluminum manufacturer and supplier established in 2001.

이상으로 20 years of industry experience, the company supplies aluminum sheets, 코일, 스트립, 포일, 서클, and embossed products to customers in more than 70 국가.

9.1 Huawei 알루미늄을 선택하는 이유?

  • Customized Specifications: Supports different alloy tempers, 두께, 너비, and coil dimensions according to order requirements.
  • Processing Capabilities: Offers aluminum processing services such as slitting, 컬러 코팅, 돋을새김, 양극 처리, and mirror finishing for applicable products.
  • 품질 관리: Focuses on chemical composition, 치수 정확도, 기계적 성질, 표면 품질.
  • Export Experience: 이상 20 years of aluminum industry experience and international business experience across 70+ 국가.

Huawei Aluminum can provide 5052 aluminum strip solutions for marine components, 운송 장비, 전기 인클로저, 일반 산업 제조.

Contact Huawei Aluminum with your required alloy temper, 두께, 너비, 수량, and application details to receive technical support and a free quotation.

10. Quality Control and Inspection Standards

For strip, quality control must confirm two things: that the material is the alloy and temper it claims to be, and that every coil will run properly on your line.

10.1 Raw material and in-process control

단계 Control Points
Incoming material Ingot purity and magnesium source checked and recorded by batch
녹는 Spectrometer analysis, magnesium and chromium adjusted before casting, oxide control
주조 Structure and surface condition
구르는 Thickness gauge, 평탄, 표면 상태
Annealing and stabilizing Temperature and time records, hardness consistency
슬리팅 너비, 가장자리 조건, 버 높이, 캠버
포장 보호, 라벨링, coil identification

10.2 Finished strip tests

시험 목적 Typical Method
화학적 구성 요소 Confirm 5052 limits, especially Mg and Cr Optical emission spectrometry
인장, 생산하다, 신장 Verify the ordered temper Tensile testing
경도 Check uniformity within and between coils Hardness tester
Bend test Confirm formability for the temper Bend test to agreed radius
두께 Confirm gauge and uniformity Micrometer or thickness gauge
Width and camber Ensure feeding and forming accuracy Calipers, straightedge methods
평탄 Prevent stamping and press-brake issues Flatness gauge
표면 외관 Detect scratches, 얼룩, 롤 마크, 기름 육안검사

10.3 Standards and compliance topics

Common references include:

  • Aluminum standards: ASTM B209, 에 485, 에 573, GB/T 3880
  • 품질경영: .ISO 9001, only if actually held
  • Environmental and chemical rules: RoHS and REACH statements, where applicable and supportable
  • Marine and pressure applications: classification society approvals (such as CCS, DNV, ABS, or LR) or pressure vessel material approvals, only if genuinely held

중요한: state only the standards and certificates your company actually holds, and be ready to provide copies. For marine and pressure uses, an unsupported claim is a serious risk.

11. 결론

5052 aluminum strip is a versatile Al-Mg alloy product known for its corrosion resistance, moderate-to-high strength, 좋은 성형성, 및 용접성.

These properties make it suitable for marine components, 운송 장비, 전기 인클로저, 산업 제조, 및 건축 응용 프로그램.

Selecting the right temper and dimensions is essential for achieving the required balance between strength and formability.

Buyers should also pay attention to chemical composition, 기계적 성질, 치수 공차, 표면 품질, and coil packaging.

Working with an experienced supplier such as 허난 화웨이 알루미늄 유한 회사, 주식 회사. can help buyers source customized 5052 aluminum strip and coordinate technical requirements for different applications.

자주 묻는 질문

1. 무엇인가요 5052 알루미늄 스트립?

5052 aluminum strip is a 5xxx-series Al-Mg alloy product known for its good corrosion resistance, 힘, 성형성, 및 용접성.

2. 이다 5052 aluminum strip corrosion-resistant?

예. It offers good resistance to atmospheric and marine environments, making it suitable for many outdoor and marine applications.

3. What tempers are available?

일반적인 성교에는 o가 포함됩니다, H32, H34, H36, 그리고 H38. O temper provides better formability, while H tempers offer higher strength.

4. 할 수 있다 5052 aluminum strip be bent and welded?

예. It has good bending and welding performance. The appropriate temper, 굴곡 반경, and welding method should be selected according to the application.

5. 차이점은 무엇입니까 5052 그리고 5083 알류미늄?

5083 generally offers higher strength for demanding marine and structural applications, 동안 5052 provides a good balance of strength, 성형성, 및 내식성.

6. What sizes are available?

두께, 너비, and coil dimensions can be customized according to supplier capabilities and order requirements.

7. 견적은 어떻게 받을 수 있나요? 5052 알루미늄 스트립?

Provide the required temper, 두께, 너비, 수량, coil specifications, and application details. The supplier can then evaluate your requirements and provide a quotation.

답을 남겨주세요

귀하의 이메일 주소는 공개되지 않습니다. 필수 입력란은 다음과 같이 표시되어 있습니다. *

최신 댓글

  • profalu ag 말했다:
    견적을 요청합니다: 그리고 AW 1050 소프트H 111 (3.0255 PL) . 반사적인 20% / 전해 윤이 나는, 무색 알루마이트 처리 8000 킬로그램 1.5 엑스 1000 엑스 2000 배달: DAP-CH-Zurich Profalu AG Schlössligasse 1 / CH-7076 파르판
  • 게르트 프리스가 말했다.:
    어이, 예술 작품 제작을 위해 쉽게 찢어지지 않고 더 두꺼운 알루미늄 호일을 찾고 있습니다., 아마도 색깔이 있는. 최소 너비 약 30 센티미터. 다양한 두께의 샘플을 볼 수 있나요?? 다음보다 두껍지 않음 1 mm. 당신이 할 수 있다면 당신은 나에게 엄청나게 도움이 될 것입니다! 나는 당신의 의견을 듣고 싶습니다. 게르트 프리스, 엔스헤데의 시각 예술가
  • 밥 사이드:
    t111 알루미늄 판이 필요해요. 우리는 1/4인치 x 4'x8' 시트를 찾고 있습니다
  • 나루에폰 사이드:
    알루미늄 5754 H111 หนา 8 mm กว้าง x ยาว : 4 엑스 6 발
  • 알리레자 모크타리안이 말했다.:
    안녕하세요, 좋습니다. 이란에서 전화했습니다. 12미크론 금박, 너비 61cm, 한 달에 약 35,000미터가 필요합니다.
  • 핫 제품

    이것은 우리의 베스트셀러 제품입니다

    3003 curtain wall aluminum sheet

    3003 커튼 월 알루미늄 시트

    3003 커튼 월 알루미늄 시트는 건물의 외벽입니다. 대형 고층 건물의 경량 벽으로 일정한 장식 효과가 있습니다..

    coated aluminium foil

    코팅된 알루미늄 호일

    코팅알루미늄박 원료 수출, 최고의 가격으로 공장 공급, 고품질, 내식성과 긴 서비스 수명

    honeycomb aluminum panel

    알루미늄 벌집 패널

    알루미늄 허니콤 패널은 자연에서 발견되는 육각형 벌집 구조에서 영감을 받은 복합재료의 일종입니다.. 이 패널은 경량으로 유명합니다., 고강도, 그리고 다재다능함, 다양한 산업 분야에서 인기 있는 선택이 됩니다., 건설부터 항공우주까지.

    6082 aluminum alloy sheet

    6082 알루미늄 합금 시트

    6082 알루미늄 시트는 열처리 가능, 강화되고 성형성이 좋다, 용접성 및 가공성, 구조용 합금이라고도 함.

    3004 Aluminium Circle

    3004 알루미늄 서클

    3004 알루미늄 서클 ,또한 명명 3004 알루미늄 디스크,3004 알루미늄 디스크, 스탬핑으로 만들어졌네요 3004 알루미늄 코일.

    Hydrophilic Aluminum Foil

    친수성 알루미늄 호일

    친수성 알루미늄 호일은 알루미늄 호일의 표면을 친수성 코팅으로 코팅하여 얻습니다, 목적은 친수성을 향상시키는 것입니다. (물 끌어당기기) 알루미늄 호일의 성능, 그리고 그것은 더 높은 열전달 효율과 내식성을 가지고 있습니다.

    우리 사무실

    52호, 동명로, 정저우, 허난, 중국

    이메일 보내기

    [email protected]

    전화주세요

    +8618137782032

    화루

    허난 화웨이 알루미늄 유한 회사, 주식 회사, 중국 허난에서 가장 큰 알루미늄 공급 업체 중 하나,우리는 2001년에 설립되었으며 수입 및 수출 및 고품질 알루미늄 제품에 대한 풍부한 경험을 가지고 있습니다.

    개관 시간:

    월~토, 8오전 – 오후 5시

    일요일: 닫은

    연락하기

    52호, 동명로, 정저우, 허난, 중국

    +8618137782032

    [email protected]

    답을 남겨주세요

    귀하의 이메일 주소는 공개되지 않습니다. 필수 입력란은 다음과 같이 표시되어 있습니다. *

    © 저작권 © 2023 허난화웨이알루미늄, 주식 회사

    전화주세요

    이메일 보내기

    왓츠앱

    문의