Professional introduction of 5052 aluminium plaat

Introductie van 5052 aluminium plaat

5052 aluminum plate is an AL-Mg alloy aluminum plate, which is the most widely used rust-proof aluminum. This alloy has high strength, especially fatigue strength: hoge plasticiteit en corrosieweerstand, kan niet worden versterkt door warmtebehandeling, good plasticity during semi-cold hardening, low plasticity during cold hardening, goede corrosiebestendigheid, goede lasbaarheid, slechte bewerkbaarheid, en kan gepolijst worden.

5052 aluminum plate is a commonly used aluminum alloy material with excellent corrosion resistance, lasbaarheid en bewerkbaarheid. It belongs to the 5000 serie aluminiumlegering, mainly composed of magnesium and aluminum, and also contains a small amount of chromium, manganese and titanium. 5052 aluminum plate is widely used in aerospace, auto-industrie, architectonische decoratie, electronic appliances and other fields.

Prestatiekenmerken van 5052 aluminium plaat

Mechanische eigenschappen

• Treksterkte (σb): 170~305 MPa
• Voorwaardelijke vloeigrens σ0,2 (MPa)≥65
• Elasticiteitsmodulus (E): 69.3~70,7Gpa
• Annealing temperature: 345℃.

Oppervlaktekwaliteit

• 1. Cracks, corrosion spots and traces of nitrate are not allowed on the surface.
• 2. Peeling, bubbels, surface roughness and local mechanical damage with a depth not exceeding 8% of the nominal wall thickness of the defect are allowed on the surface, but the maximum depth of the defect cannot exceed 0.5mm, and the total area of the defect does not exceed 5% of the total area of the plate.
• 3. The supplier is allowed to polish the profile longitudinally until the surface is smooth.
• 4. Other requirements: to be formulated by the demander and the supplier.

Hardheid

• Hardheid: The tensile strength of 1060 aluminium plaat is between 110-130, while the tensile strength of 5052 series is between 210-230, which means that the hardness of 5052 is 100% hoger dan die van 1060.
• Verlenging: The elongation of 1060 series is 5%, while the elongation of 5052 series is between 12-20%. It can also be considered that when 5052 series is 100% harder than 1060, the elongation is also increased by about 200%.
• Chemical properties: 1060 is pure aluminum plate, 5052 is alloy aluminum plate, En 5052 is more corrosion-resistant in special environments.

Implementation Standard

National Standard for Aluminum Plate and Strip (GB/T 3880-2006), a unified standard applicable to aluminum alloy plate and strip materials.

Eigenschappen van 5052 aluminium plaat

5052 aluminum plate has the following characteristics:

Uitstekende corrosieweerstand

5052 aluminum plate has good corrosion resistance and can be used for a long time in moisture and salt water environment without rusting.

Lasbaarheid

5052 aluminum plate has good weldability and can be connected by common welding methods.

Easy processing

5052 aluminum plate has excellent processing performance and can be cut, stamped, bent and other processing operations, which is suitable for processing requirements of various complex shapes.

Fatigue resistance

5052 aluminum plate has good fatigue resistance and is suitable for occasions that are subjected to vibration and impact loads for a long time.

Toepassingsgebieden van 5052 aluminium plaat

Vanwege zijn uitstekende prestaties, 5052 aluminum plate is widely used in many fields.

Lucht- en ruimtevaartveld

5052 aluminum plate is often used in the aerospace field to manufacture aircraft fuselage, Vleugels, fuel tanks and other parts.

Automobielproductiegebied

5052 aluminum plate is often used in the automobile manufacturing field to manufacture automobile body, door, roof and other parts, which can reduce the weight of the car body and improve fuel economy.

Building decoration field

5052 aluminum plate is often used in the field of building decoration to manufacture ceilings, muur panelen, curtain walls and other decorative materials, with good decorative effect and weather resistance.

Electronic and electrical field

5052 aluminum plate is often used in the field of electronic and electrical fields to manufacture electronic product housings, heat sinks and other parts, with good thermal conductivity and electromagnetic shielding performance.

Samenvatting

As a commonly used aluminum alloy material, 5052 aluminiumplaat heeft een uitstekende corrosieweerstand, lasbaarheid en bewerkbaarheid. Its specifications include thickness, width and length, wide application fields, complex processing technology and strict quality control. In the future market, 5052 aluminum plate has broad development prospects.