Inhoudsopgave Show

Aluminium strip voor transformator

Aluminiumstrip voor transformator betekent dat aluminiumstrip wordt gebruikt als geleidend materiaal in de hoog- en laagspanningswikkelingen van droge transformatoren en in olie ondergedompelde transformatoren.

The common thickness of transformer aluminum strip is 0.2-3.5mm, and the width is 10-1600mm. Normally, Huawei transformer aluminum strips are usually attached with blue plastic film and wrapped with kraft paper.

Aluminium strip voor transformator

Aluminum strip for transformers is made of high-quality pure aluminum. It has the characteristics of high conductivity, soft texture, smooth surface and no burrs. It is an ideal material for the production of dry-type transformers and a key raw material for manufacturing transformer windings. It has good electrical conductivity to the aluminum strip. There are high requirements on many technical indicators such as rate, burr curling, side bending, and surface quality.

Aluminum strip for transformer common alloys

Since transformer aluminum strips have high requirements on the conductivity of the material and do not require strength, 1000 series aluminum alloy has become the best choice. Common alloys include 1050, 1060, 1070, En 1350.

Alloys composition of transformer aluminum strips
Legering	Al	En	Fe	mgr	Zn	Mn	Cu	Van	Van
1050	≥99.5	0.25	0.40	0.05	0.05	0.05	0.05	0.03	0.05
1060	≥99.6	0.25	0.35	0.03	0.05	0.03	0.05	0.03	0.05
1070	≥99.7	0.20	0.25	0.03	0.04	0.03	0.04	0.03	0.05
1350	≥99.5	0.10	0.40	–	0.05	0.01	0.05	0.02

Advantages of using aluminum strip for transformers

Aluminum strips for transformers have good elongation and tensile strength, and can fully meet conventional processing requirements (stempelen, stretching) and high formability.

Industrial pure aluminum has high plasticity, corrosieweerstand, electrical conductivity and thermal conductivity, but its strength is low and heat treatment cannot enhance its machinability. It can be gas welded, waterstofatomair gelast en contactgelast, but not easy to braze. It can easily withstand various Pressure processing and stretching and bending.

Transformer Structure

The temperature resistance level of the aluminum wire paint layer is between 180℃ and 220℃. When the welding problem is solved, the failure rate of transformers produced with aluminum will be smaller. ten tweede, my country is rich in aluminum resources and the cost of aluminum wires is low. Production with aluminum The transformer costs less and is more competitive in the market.

Transformer aluminum strip specifications

Gebruik	Aluminum strip and aluminum foil for dry-type transformers
Materiaal	1050-O, 1060-O, 1070-O, 1350-O
Dikte	0.2mm–3.0mm, customize
Quality	Smooth surface, no scratches. The edges can be chamfered (rounded corners, rounded edges) zonder bramen, which is better than national standards. The resistivity is less than or equal to 0.028.
Inpakken	Wooden pallet, inner diameter 300mm or 500mm.

Aluminum strip for transformer production process

First step: raw cloth slitting

Aluminum coil raw fabric with Slitting equipment made into the width clients needs

Transformer-Aluminum-Strip-Production

Seconde: Aluminum coil winding

So as tu make sure the first-class of aluminum coil,the side remedy is made at the gadget

Derde: Aluminum coil constant

The detection width and thickness deviation of the aluminum coil are consistent with the technical requipments of the customer,add a paper sleeve to the scrolls and connect aluminum coil with glass fiber tape

Huawei quality control system

We pay greater attention to great aid, supply scope, inspection, testing fashionable, cargo packing, after-sales service.
We have surpassed ISO9001 pleasant control gadget certification.

Aluminium strip voor transformator

High-quality manage manner:

1) Checking the raw fabric of aluminum after they reach our manufacturing unit- Incoming quality manipulate.
2) Checking the information before the production line operated.
3) Have complete inspection and routing inspection in the course of slitting manufacturing-In system great control.
4) Checking the aluminum strip after they’re produced- very last great manipulate.
5) Checking the aluminum strip before shipment.

On the same time, we are able to help take pix and shoot motion pictures of aluminum strips for you in case you want. Each product will be absolutely and punctiliously examined earlier than packing and delivery.

laatste Reacties

AKBAR SAJJAD zei:
Geachte heer, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99,50% MIN) MAAT:450 X32 X6MM. JOUW EEN 570 NL-AW 1050 A, AANTAL=3400KG

Sviatlana Kapachenia Said:
Hallo, Zou u zo vriendelijk willen zijn om het item als volgt aan te bieden: Spoel 0,6х1250 (1000)mm EN AW-3105 5tons

MILES zei:
Hallo, Kunt u mij aluminiumplaten aanbieden?? Eigenlijk heb ik het nodig: 110mm x 1700 mm x 1700 mm 5083 H111 - 21 pcs Next year planed is 177 stuks

Fotograaf zei:
Geweldig artikel. Ik was blij verrast, dat ik dit artikel heb gevonden. Veel mensen denken van wel, dat zij over betrouwbare kennis over dit onderwerp beschikken, maar dit is vaak niet het geval. Vandaar mijn aangename verrassing. ik ben onder de indruk. Ik zal deze plek zeker aanbevelen en vaker terugkomen, om nieuwe dingen te zien.

zei Kishor Wagh:
eis van aluminium strip