The difference between 6063 En 6061 aluminium profiel

Thuis » Bloggen » The difference between 6063 En 6061 aluminium profiel

The main alloying elements of 6063 aluminum alloy are magnesium and silicon, which has excellent processability, uitstekende lasbaarheid, extrudability and electroplating property, goede corrosiebestendigheid, taaiheid, easy polishing, coating, and excellent anodic oxidation effect.

The difference between 6063 En 6061 aluminium profiel

The main alloying elements of 6063 aluminium profiel are magnesium and silicon, which has excellent processability, uitstekende lasbaarheid, extrudability and electroplating property, goede corrosiebestendigheid, taaiheid, easy polishing, coating, and excellent anodic oxidation effect. It is a typical extrusion alloy, widely used in construction profiles, irrigation pipes, pijpen, rods, profiles for vehicles, benches, meubilair, lifts, fences, enz. 6063 is generally used in construction profiles.

6063 Aluminum Sheet

6063 Aluminium plaat

The main alloying elements of 6061 aluminium profiel are magnesium and silicon, and form Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is also a small amount of conductive materials Copper to counteract the adverse effects of titanium and iron on conductivity; zirconium or titanium can refine grains and control recrystallization structure; in order to improve machinability, lead and bismuth can be added. In Mg2Si, the ratio of Mg/Si is 1.73. In the state of heat treatment, Mg2Si is solid-dissolved in aluminum, so that the alloy has the function of artificial age hardening.

6061 requires industrial structural parts with certain strength, weldability and high corrosion resistance. 6061 requires various industrial structures with certain strength, high weldability and corrosion resistance, such as pipes, rods, profiles, sheet.

In het algemeen, 6061 has more alloy elements than 6063, so the material strength is higher.

Laat een antwoord achter

Uw e-mailadres wordt niet gepubliceerd. Verplichte velden zijn gemarkeerd *

laatste Reacties

  • AKBAR SAJJAD zei:
    Geachte heer, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99,50% MIN) MAAT:450 X32 X6MM. JOUW EEN 570 NL-AW 1050 A, AANTAL=3400KG
  • Sviatlana Kapachenia Said:
    Hallo, Zou u zo vriendelijk willen zijn om het item als volgt aan te bieden: Spoel 0,6х1250 (1000)mm EN AW-3105 5tons
  • MILES zei:
    Hallo, Kunt u mij aluminiumplaten aanbieden?? Eigenlijk heb ik het nodig: 110mm x 1700 mm x 1700 mm 5083 H111 - 21 pcs Next year planed is 177 stuks
  • Fotograaf zei:
    Geweldig artikel. Ik was blij verrast, dat ik dit artikel heb gevonden. Veel mensen denken van wel, dat zij over betrouwbare kennis over dit onderwerp beschikken, maar dit is vaak niet het geval. Vandaar mijn aangename verrassing. ik ben onder de indruk. Ik zal deze plek zeker aanbevelen en vaker terugkomen, om nieuwe dingen te zien.
  • zei Kishor Wagh:
    eis van aluminium strip
  • hete producten

    Dit zijn onze best verkopende producten

    Pvdf Coated Aluminum Coil

    Pvdf gecoate aluminium spoel

    Pvdf gecoate aluminium spoel is een type kleurgecoate aluminium spoel, Kleurgecoate aluminium spoel kan worden onderverdeeld in polyester (PE) gecoate aluminium spoel, fluorkoolstof (PVDF) gecoate aluminium spoel en epoxy-gecoate aluminium spoel.

    5083 Aluminum Sheet

    5083 Aluminium plaat

    5083 Aluminiumplaat staat bekend om zijn superieure prestaties in extreme omgevingen. 5083 Aluminium is zeer goed bestand tegen corrosie door zeewater en industriële chemische omgevingen.

    Aluminum Circle Edge

    Aluminium schijfcirkel voor lamp

    Gemeenschappelijke aluminium schijfcirkel voor lampen is 1050-O, 1060-O, 1100-O, enz., omdat de lampenkap wordt verkregen door aluminium schijven te stempelen, en de O-state aluminium schijven hebben een betere ductiliteit en zijn geschikter voor stempelbehandeling;

    Aluminum Foil 3004

    3004 aluminiumfolie

    De verpakking van levensmiddelen, grondstof voor huishoudfolie 3004 aluminiumfolie, professionele productie-expert van aluminiumlegeringen, 20 productielijnen

    Perforated Aluminum Sheet

    Geperforeerde aluminium plaat

    Geperforeerde aluminiumplaten worden gemaakt van aluminiumplaten die zijn bewerkt met ronde gaten (of andere ontwerpen). De gaten kunnen in lijn of verspringend zijn om het aantal openingen te vergroten.

    7075 Aluminum Sheet Plate

    7075 aluminium plaat

    7075 aluminiumplaat is de sterkste warmtebehandelbare legering, geïntroduceerd door Alcoa in 1943, en kan een warmtebehandeling ondergaan om sterkteniveaus te bereiken die vergelijkbaar zijn met die van veel staallegeringen.

    Ons kantoor

    Nr.52, Dongming-weg, Zhengzhou, Henan, China

    Email ons

    sales@hw-alu.com

    HWALU

    Henan Huawei Aluminium Co., Ltd, Een van de grootste aluminiumleveranciers in China Henan,We zijn opgericht in 2001 en hebben een rijke ervaring in import en export en hoogwaardige aluminiumproducten

    Openingstijden:

    Ma – Za, 8AM – 17.00 uur

    Zondag: Gesloten

    Neem contact op

    Nr.52, Dongming-weg, Zhengzhou, Henan, China

    +86 181 3778 2032

    sales@hw-alu.com

    Laat een antwoord achter

    Uw e-mailadres wordt niet gepubliceerd. Verplichte velden zijn gemarkeerd *

    © Auteursrecht © 2023 Henan Huawei Aluminium Co., Ltd

    Bel ons

    Email ons

    WhatsApp

    Navraag