Hydrophilic aluminum foil is obtained by coating the surface of aluminum foil with hydrophilic coating, the purpose is to improve the hydrophilic (water-attracting) performance of the aluminum foil, and it has higher heat transfer efficiency and corrosion resistance.
Hydrophilic Aluminum Foil is a specialized type of aluminum foil that has undergone a surface treatment to enhance its hydrophilic (water-attracting) properties.
Hydrophilic Aluminum Foil is commonly used in various applications where efficient heat transfer and moisture management are required. The hydrophilic coating applied to the foil’s surface allows it to rapidly and uniformly distribute condensation or liquid, facilitating better heat exchange in heat exchangers, air conditioning systems, and radiators.
Aluminum Hydrophilic Foil
Compared to regular aluminum foil, which has hydrophobic properties and repels water, Hydrophilic Aluminum Foil offers superior performance in terms of heat transfer efficiency and corrosion resistance.
| Legering | Temperament | Tykkelse(mm) | Strekkstyrke(MPA) | Elogation At 50mm Interval(%) | Cup I.E,mm |
| 1100 3102 8011 |
O | 0.08-0.20 | 80-110 | ≥20 | ≥6.0 |
| H22 | 0.08-0.20 | 100-130 | ≥18 | ≥6.5 | |
| H24 | 0.08-0.20 | 115-145 | ≥16 | ≥6.0 | |
| H26 | 0.08-0.20 | 135-165 | ≥10 | ≥5.5 | |
| H18 | 0.08-0.20 | ≥160 | ≥6 | – |
Note: As the raw material of hydrophilic foil, 8011 aluminum foil is the most common alloy
| INNER DIAMETER | 76/152MM. |
| Thickness And Thickness Tolerance : | |
| Tykkelse(mm) | Thickness Tolerance |
| 0.080 | ±0.005 |
| > 0.115-0.130 | ±0.008 |
| > 0.130-0.32 | ±0.010 |
| Width And Tolerance : | |
| Bredde(mm) | Width Tolerance |
| ≤500 | ±0.005 |
| > 0.115-0.130 | ±0.008 |
| > 0.130-0.32 | ±0.010 |
| REEL : | |
| Bredde(mm) | Width Tolerance |
| ≤1400 | +2.0,0 |
| Telescopic And Layer : | |
| Telescopicy: 5MM | Layer: 0.5mm |
Note: Hydrophilic aluminum foil is available in jumbo rolls, there is a certain relationship between tolerance and size.
| Item | Inspection Methods | Technical Requirements | |
| Film (Double Surface) |
Weighing | Anti-Corrosion:1.6—2.0G/M2
Hydrophilic:0.4-0.7G/M2 |
|
| Adhesion | Cup Test:5mm | No De-Laying | |
| Jis4001 Network Test(100/100) | No Peeling | ||
| T Test(180 Degree) | No De-Laying | ||
| Hydrophilic | Initial Phase | Coating Status | ®≤5C |
| Continuous Test Phase | Dipping 100 Hours In Flow Water (300 L/H),Drying For 2 H, Then Test | Humidity100%:®≤20C | |
| Dry Cycle 300 Times | Humidity 100%:®≤28c | ||
| Dipping Into Volatilizing Solvant For 5min. And Drying It In Temperature 150 Degree, Then Dipping Into Flow Water For 5min. Then Drying In Oven Of Temperature 150 Degree For 150 Degree, Then Test It | Humidity 100%:®≤28C | ||
| Anti-Corrosion | Jisz2371 Nutual Salt Spray Test(72 H) | R.NO.≥9.8 | |
| Anti-Alikalinity | Sample Dip For 3min In 20% Naoh For 20 C+/-1 C | No Changing | |
| Anti-Hot | In 200+/-5c Oven For 10min. View Film Color | No Changing | |
| In 300+/-5 Oven For 5min, View The Color | Slightly Green | ||
| Anti-Oil | Dipping Into Volatilizing
Oil(Af-2c,Af-2as,T7k18b,Rf-190) For 24 H |
No Peeling | |
The hydrophilic coating on the aluminum foil promotes improved moisture absorption and increases the surface area, resulting in enhanced heat transfer efficiency. This allows for better cooling and heat dissipation, making it ideal for heat exchangers, air conditioning systems, and refrigeration units.
Hydrophilic Aluminum Foil is highly resistant to corrosion, making it suitable for applications in humid and corrosive environments. This resistance ensures the durability and longevity of the foil, even in challenging conditions, thereby reducing maintenance needs and extending the lifespan of equipment.
By facilitating efficient heat exchange, Hydrophilic Aluminum Foil helps optimize energy usage. It allows systems to cool more effectively, reducing the energy consumption required for maintaining desired temperatures. This can lead to energy savings and cost reduction in long-term operations.
Aluminum is a recyclable material, and the hydrophilic foil can be recycled after use, contributing to sustainable practices and reducing environmental impact. Choosing Hydrophilic Aluminum Foil aligns with eco-friendly initiatives and supports a circular economy.
The production process of hydrophilic aluminum foil is basically the same as that of aluminum foil, except that 3 processes are added in the middle;
Aluminum Hydrophilic Foil Production Line
After the rolling of the aluminum foil is completed, the following 3 steps are performed:
Rewind after the above 3 steps (this process is exactly the same as aluminum foil production)
Hydrophilic foil is widely used in refrigeration equipment such as air conditioners and refrigerators, as well as some industrial heat exchange systems;
 |
 |
 |
| Air conditioning systems | Refrigerator | Heat exchangers |
 |
 |
 |
| Radiators | Condenser | Evaporator |
Dry Environment: Store hydrophilic aluminum foil in a dry environment with low humidity levels. Moisture can affect the hydrophilic properties of the foil and lead to degradation.
Temperature Control: Maintain a stable temperature for the storage area. Extreme temperatures can impact the structural integrity and performance of the foil.
Protection from Contaminants: Keep the hydrophilic foil away from dust, dirt, and other contaminants that could potentially affect its surface or hydrophilic coating.
Hydrophilic Aluminum Foil Storage
Avoid Pressure and Impact: Avoid placing heavy objects or applying pressure on the stored hydrophilic foil. Excessive pressure or impact can cause deformation or damage to the foil, compromising its effectiveness.
Ordinary aluminum foil cannot meet the requirements of energy saving, environmental protection, korrosjonsbestandighet, and antibacterial for air conditioners. Hydrophilic aluminum foil has strong hydrophilicity. The water droplets condensed on the heat sink are easy to spread and flow down the heat sink to avoid low ventilation effect.
The surface of the hydrophilic aluminum foil is covered with a hydrophilic layer, and the condensed water will spread rapidly on the hydrophilic aluminum foil without condensing into water droplets, which increases the heat transfer area, speeds up the cooling and heating speed, and effectively avoids the noise caused by air flow.
| Hydrophilic Aluminum Foil | Copper Foil | |
|---|---|---|
| Heat Transfer | Good | Excellent |
| Moisture Management | Excellent | Limited |
| Corrosion Resistance | Good | Excellent |
| Weight | Lightweight | Relatively Heavy |
| Cost | Affordable | Expensive |
| Availability | Widely Available | Limited |
| Electrical Conductivity | Moderate | Excellent |
| Compatibility | Suitable for most applications | Suitable for specific applications |
Q:What is hydrophilic coating?
EN:acrylic or epoxy
Q:Can Hydrophilic Aluminum Foil be recycled?
EN:Yes, Hydrophilic Aluminum Foil can be recycled. Aluminum is highly recyclable and can be processed repeatedly without losing its properties. Recycling Hydrophilic Aluminum Foil helps conserve natural resources and reduces the environmental impact associated with primary aluminum production.
5454 aluminum sheet has strong anti-rust ability and belongs to the 5000 series aluminum-magnesium alloy. 5454 aluminum sheet is also a non-heat treatable alloy and is 20% stronger than 5052 aluminum sheet. It is often used in marine facilities pipelines, aluminum tank car bodies and other fields.
Corrosion Resistant Black Aluminum Foil for Sale, China Aluminum Foil Manufacturer Low Price Promotion, Color Coated Aluminum Foil Anodized Foil Raw Material Supplier
Painted aluminum coil (Coated aluminum coil) is a popular material choice for construction, transportation, and signage due to its lightweight, durability, and versatility.
Export of coated aluminum foil raw materials, factory supply with the best price, high quality, corrosion resistance and long service life
Same as 1050 aluminum sheet, 1060 aluminum sheet also belongs to 1 series pure aluminum sheet，Commonly used in lithium battery soft connection, bus bar, road sign, charging pile, aluminum gasket, billboard building exterior wall decoration，and so on.
Pvdf Coated Aluminum Coil is one type of Color coated aluminum coil, Color coated aluminum coil can be divided into polyester (PE) coated aluminum coil, fluorocarbon (PVDF) coated aluminum coil and epoxy roller coated aluminum coil.
Nr.52, Dongming Road, Zhengzhou, Henan, Kina
Henan Huawei Aluminium Co., Ltd, En av de største aluminiumsleverandørene i Kina Henan,Vi er etablert i 2001, og vi har rik erfaring innen import og eksport og høykvalitets aluminiumsprodukter
man – lør, 8AM – 17:00
søndag: Lukket
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Siste kommentarer
Aluminium 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 fot
Hei, veldig bra, jeg ringer fra Iran, vi trenger 12 mikron gullfolie, 61 cm bred, ca 35 tusen meter per måned.
Kjære salgsteam, Jeg håper du har det bra. Vi ønsker å hente aluminiumsprodukter fra din bedrift og vil sette pris på å motta ditt beste tilbud for følgende: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, og 5 mm Please provide your available standard sheet sizes. Vennligst oppgi prisen per ark og prisen per metrisk tonn. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, og 5 mm Please provide your available coil widths, standard spolevekter, og spesifikasjoner for indre diameter. Vennligst oppgi prisen per tonn. For både ark og spoler, vennligst ta med: Tilgjengelige legeringer (f.eks. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (inkludert sjøfrakt), eller alternativt gi både FOB China og CIF Jebel Ali Port, UAE priser. Hvis tilgjengelig, send gjerne også: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. Vi er interessert i å etablere et langsiktig forretningsforhold. Vårt første kjøpsvolum forventes å være 100+ metriske tonn, med potensiale for større og tilbakevendende bestillinger hvis din prissetting, kvalitet, og service oppfyller våre krav. Takk for at du tok deg tid. Vi ser frem til å motta tilbudet ditt og håper å bygge et vellykket langsiktig partnerskap. Med vennlig hilsen, Eng.Yousef
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります 又、Hvis et slikt produkt finnes, vekten、価格をおしえていただけますか 現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます 出来ましたらメールでお返事をいただけますか
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚み で曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※約1000mmの側溝に渡して200kg耐えられるかとなります その製品の重量、Kan du fortelle meg prisen?