5454 aluminiumplåt

Introduction of 5454 aluminiumplåt

5454 aluminum sheet is an aluminum sheet with strong anti-rust ability and belongs to the 5000 serie aluminium-magnesiumlegering. 5454 aluminum sheet is also a non-heat-treatable alloy and can be strengthened through cold working. Its strength is 20% higher than the medium-strength 5052 aluminiumplåt.

5454 aluminiumplåt

Aluminum 5454 has very good corrosion resistance, in particular to seawwater and general environmental conditions. Strength is medium to high and similar to ally 5754 with good strength in the temperature range 65 to 170 degrees centigrade. It has a high fatigue strength.

5454 aluminum alloy has excellent anti-rust properties. Therefore, we often see 5454 aluminum sheets in environments with high anti-rust requirements, such as marine facility pipelines, aluminum tank car bodies, automobile wheels, etc.

Huawei Aluminum 5454 aluminum sheet specifications

Chemical composition of 5454 aluminiumplåt

Aluminum (Al): The primary component, making up the majority of the alloy.

Magnesium (Mg): It provides strength and enhances corrosion resistance.

Chromium (Cr): Contributes to improved corrosion resistance, especially in marine environments.

Manganese (Mn): A minor alloying element that helps with strength and workability.

Iron (Fe), Silicon (Si), Copper (Cu), and other trace elements: Present in small amounts, they can affect the alloy’s properties but are not major constituents.

5454 aluminum alloy physical properties

Alloy equivalent name

Aluminum alloy 5454 corresponds to the following standard designations and specifications (not directly equivalent): A5454, ISO Al Mg3MN and Al 2.7Mg 0.8Mn Cr.

The following specifications cover Aluminum 5454

• ASTM B209
• ASTM B221
• ASTM B234
• ASTM B241
• ASTM B404
• ASTM B547
• ASTM B548
• QQ A-200/6
• QQ A250/10
• SAE J454
• UNS A95454

Tempers of 5454 aluminium

The most common states of 5454 aluminum are:

O – soft

H111 – The forming process produces some work hardening, but not to the extent required for H11 tempering.

H22 – Work hardened by rolling, then annealed to one quarter hardness.

H32 – Work hardened by rolling and then stabilized to one quarter hardness by low temperature heat treatment.

5454 H22/H32 Mechanical properties at room temperature

Features of 5454 aluminiumplåt

5454 aluminum sheet offers a range of favorable properties:

Corrosion Resistance: One of its key features is its exceptional corrosion resistance, making it suitable for marine applications.

Strength: 5454 aluminum has good strength, although it is not heat-treatable like some other alloys. Its strength can be enhanced through cold working.

Weldability: This alloy is highly weldable, making it suitable for various fabrication processes. It can be readily welded using common techniques such as MIG and TIG welding.

Formability: 5454 aluminum can be easily formed and shaped, making it versatile for different manufacturing processes.

Machinability: While it is not as easy to machine as some other aluminum alloys, it can still be machined using appropriate tools and techniques.

5454 aluminum sheet packged

Applications of 5454 aluminiumplåt

5454 aluminum sheet finds applications in various industries, including:

Marine Industry: Due to its excellent corrosion resistance, it is commonly used in the construction of boat hulls, ship structures, and other marine components.

Automotive Industry: This alloy is used in the manufacturing of vehicle panels, such as inner and outer panels, floor panels, and automotive fuel tanks.

Pressure Vessels: It is suitable for manufacturing pressure vessels and storage tanks that require corrosion resistance and structural integrity.

Transportation: 5454 aluminum is used in the construction of trailers, truck bodies, and other transportation equipment.

General Sheet Metal Fabrication: It is also utilized in various general sheet metal applications where corrosion resistance and moderate strength are required.

5454 aluminum sheet/plate typical applications

5454-O aluminum plate for tank truck body material

The body of a tank truck is composed of coamings, anti-wave plates, tank mouths and other parts. Currently, the commonly used tank materials on the market include carbon steel, stainless steel, and aluminum alloy materials. With the development of lightweight, aluminum strip steel has become a craze. , the proportion of aluminum alloys in tank trucks is getting higher and higher.

5454-O aluminum sheet plate for tank truck body

The length of aluminum plates commonly used for tank trucks on the market is generally less than 12.5 meters, the width is less than 2.2 meters, and the common thicknesses are generally 5, 6, 7, and 8 mm. A complete tank truck body generally requires 4-6 aluminum plates to be welded.

The tank material is generally made of 5454 aluminum plate, 5083 aluminiumplåt, etc. The O-state is softer, and the partition (wave-proof plate) part is made of 5083-O state. 5454 aluminum plate is a typical rust-proof aluminum and has high strength, about 20% higher than 5052 aluminiumplåt.

Aluminum alloy tank trucks can not only significantly reduce the weight of the vehicle and improve transportation efficiency, but also have a long service life and are more environmentally friendly and safer. Throughout the entire life cycle, aluminum alloy tank trucks create higher overall profits than traditional carbon steel tank trucks.

5454 marine aluminum plate

5454 marine aluminum plates are mainly used for ship structural parts, internal pressure vessels, pipes and other parts such as speedboats, yachts, fishing boats, large cargo ships, etc. The 5454 ship plates required for different ship structural parts are also in different states.

Huawei Aluminum specializes in the production of 5454 marine aluminum plates. Leave your demand information and we will tailor-make 5454 marine aluminum plates suitable for you based on your actual usage conditions.

5454 marine aluminum plate

5454 marine aluminum plate is mainly used for hull structural parts, pressure vessels and pipelines. It is an aluminum plate with high strength, corrosion resistance and good weldability specially developed by Huawei Aluminum for the internal structure of ships.

What can we supply

• Aluminum sheet/plate
• Aluminum coil
• Aluminum strip
• Aluminum foil
• Aluminum circle

Why choose Huawei Aluminum

Huawei Aluminum is a professional 5454 aluminum sheet supplier. There are its five advantages:

2mm thickness 5454 aluminum sheet 4×8

Length measurement	Width measurement
Diagonal measurement	Thickness measurement

• 1. The six-high cold rolling mill can produce 5454 aluminum wide sheet with a flat pattern and neat trimming.
• 2. The “1+1” production line provides a strong foundation for the large-scale production of 5454 aluminum sheets and further guarantees the good performance of 5454 aluminum sheets.
• 3. The melt multi-stage combined purification technology and ensure the purity of the melt reach aviation level. It provides ingot casting guarantee for the production of high-quality aluminum sheet.
• 4. Huawei 5454 aluminum sheet/plate is available for different welding methods such as TIG, MIG, FSW, EBW,etc.
• 5. It can provide aluminum wide sheet for tanker
• 6. The aluminum sheet width can reach 3800mm and aluminum coil width can reach 2650mm. Its length is 2000-27000mm. The aluminum wide sheet can reduce welding seam, thus enhancing strength of base metal and corrosion resistance.