5052 aluminum strip is a widely used aluminum alloy product valued for its combination of mechanical strength, chống ăn mòn, và tính linh hoạt trong chế tạo.
As a member of the 5000 loạt, it uses magnesium as its primary alloying element and belongs to the group of non-heat-treatable aluminum alloys.
Manufacturers can adjust its mechanical properties through cold working and temper control to meet different processing and application requirements.
Trong sản xuất công nghiệp, aluminum strip offers an additional advantage: its narrow and consistent width makes it convenient for continuous processing, Dập, tạo hình cuộn, and automated manufacturing.
Buyers can specify thickness, chiều rộng, đường kính bên trong cuộn dây, nóng nảy, tình trạng cạnh, and surface finish according to their production requirements.
Tuy nhiên, selecting the right material involves more than confirming the 5052 alloy designation.
nóng nảy, dung sai kích thước, Chất lượng bề mặt, and mechanical properties all influence processing efficiency and finished-product performance.
A reliable 5052 aluminum strip supplier should therefore provide consistent material quality, accurate slitting, suitable technical documentation, and flexible product specifications.

5052 Dải nhôm
5052 aluminum is a magnesium-based alloy in the 5000 loạt. Its typical magnesium content ranges from 2.2% ĐẾN 2.8%, while chromium is added in a controlled amount to support its corrosion resistance and metallurgical performance.
Unlike heat-treatable alloys such as 6061, 5052 does not rely on solution heat treatment and artificial aging to achieve its strength.
Thay vì, manufacturers primarily adjust its mechanical properties through strain hardening, followed by stabilization where required.
This alloy offers a useful balance of strength, Độ dẻo, và chống ăn mòn.
It performs particularly well in atmospheric and marine environments, although the actual corrosion performance depends on exposure conditions, điều kiện bề mặt, and component design.
Aluminum strip refers to a narrow, flat-rolled aluminum product supplied in coil form or as cut lengths.
Manufacturers commonly produce it by slitting wider aluminum coils into narrower widths according to customer specifications.
Although aluminum sheet, cuộn, and strip share similar rolling processes, they differ mainly in product dimensions and delivery formats.
| Mẫu sản phẩm | Đặc điểm chính | Typical Supply Form |
| Tấm nhôm | Flat aluminum product with specified thickness and width | Individual sheets |
| Cuộn dây nhôm | Continuous rolled aluminum material in coil form | Large coils |
| Dải nhôm | Narrow-width aluminum material, usually slit from wider coils | Slit coils or cut strips |
Các thông số kỹ thuật của 5052 aluminum strip determine whether the material can meet a customer’s manufacturing and end-use requirements.
Buyers should evaluate alloy designation, nóng nảy, Độ dày, chiều rộng, kích thước cuộn dây, chất lượng cạnh, and surface finish before placing an order.
| Tham số | thông số kỹ thuật / Phạm vi điển hình |
| Tên sản phẩm | 5052 Dải nhôm |
| Alloy Designation | 5052 / AA5052 |
| Dòng hợp kim | 5000 Loạt |
| Loại hợp kim | Aluminum-Magnesium Alloy |
| Yếu tố hợp kim chính | Magiê (Mg) |
| Mẫu sản phẩm | Dải nhôm / Slit Coil |
| Nhiệt độ phổ biến | Ô, H12, H14, H16, H18, H22, H24, H32, H34, H36 ·, H38 · |
| Phạm vi độ dày | 0.15–10.0 mm, depending on temper and supplier |
| Common Thickness | 0.5–6,0 mm |
| Phạm vi chiều rộng | 20–2,650 mm, depending on production capability |
| Common Standard Widths | 1,000 / 1,250 / 1,219 / 1,500 / 1,524 mm |
| Narrow Strip Width | Tùy chỉnh, commonly produced by precision slitting |
| Đường kính trong của cuộn dây (ID) | Thông thường 305 / 405 / 406 / 505 / 508 / 610 mm, subject to availability |
| Coil Outer Diameter (TỪ) | Customized according to coil weight and handling requirements |
| Trọng lượng cuộn dây | Customized according to width, Độ dày, and customer requirements |
| Edge Type | Mill Edge / Slit Edge |
| Bề mặt hoàn thiện | nhà máy kết thúc; other finishes subject to agreement |
| Bảo vệ bề mặt | Bare Surface / PE or PVC Film, if specified |
| Sức căng | Approximately 170–305 MPa, depending on temper and thickness |
| sức mạnh năng suất | Approximately 65–255 MPa, depending on temper and thickness |
| Độ giãn dài | Approximately 3–25%, depending on temper and thickness |
| Mật độ | Khoảng 2.68 g/cm³ |
| Mô đun đàn hồi | Khoảng 70.3 Bác sĩ đa khoa |
| Chống ăn mòn | Good atmospheric and marine corrosion resistance |
| định dạng | Tốt, particularly in O temper |
| khả năng hàn | Good with suitable welding procedures |
| Tiêu chuẩn áp dụng | ASTM B209, TRONG 485 Loạt, TRONG 573-3, GB/T 3880 |
Thành phần hóa học của 5052 aluminum determines many of its important characteristics, bao gồm cả sức mạnh, chống ăn mòn, khả năng tạo hình, and welding performance.

5052 Aluminum Strip With Bluefilm
The following table presents the commonly specified chemical composition limits for 5052 nhôm.
Thành phần hóa học của 5052 Nhôm (wt.%)
| Yếu tố | Symbol | Thành phần |
| Nhôm | Al | Dư |
| Magiê | Mg | 2.2Cấm2.8 |
| Crom | Cr | 0.15Cấm0,35 |
| silicon | Và | ≤0,25 |
| Sắt | Fe | ≤0,40 |
| Đồng | cu | ≤0,10 |
| mangan | mn | ≤0,10 |
| kẽm | Zn | ≤0,10 |
| Khác, Mỗi | — | ≤0,05 |
| Khác, Tất cả | — | ≤0,15 |
*Ghi: Values are representative composition limits commonly associated with 5052 nhôm.
The applicable standard and its specified edition should govern contractual acceptance.
Các tính chất cơ học của 5052 aluminum strip change significantly with its temper.
Annealed O temper offers high ductility and excellent formability, while strain-hardened H tempers provide higher strength and hardness.
The following table provides representative mechanical property ranges for commonly used tempers.
Tính chất cơ học của 5052 Aluminum by Temper
| nóng nảy | Sức căng (MPa) | sức mạnh năng suất (MPa) | Độ giãn dài (%) | Brinell độ cứng (HB) |
| Ô | 170–215 | ≥65 | 14–20 | Khoảng. 47 |
| H32 | 215–265 | ≥160 | 4Tiết10 | Khoảng. 60 |
| H34 | 235–285 | ≥180 | 3–8 | Khoảng. 68 |
| H36 · | 255–305 | ≥200 | 2–4 | Khoảng. 73 |
| H38 · | ≥270 | ≥220 | 2–4 | Khoảng. 77 |
Reference values compiled from published 5052 alloy datasheets. Actual specified limits and elongation depend on thickness, hình thức sản phẩm, phương pháp thử, và tiêu chuẩn áp dụng.
Hardness values are typical rather than universal acceptance requirements.
Several factors should guide temper selection:
For narrow aluminum strips used in continuous stamping or roll forming, temper consistency is particularly important.
Variations in hardness or elongation can affect feeding stability, hồi xuân, độ chính xác chiều, and forming quality.
5052 aluminum combines low density with useful thermal and electrical properties.
Although it does not offer the same electrical conductivity as commercially pure aluminum, it provides a good balance of physical and mechanical characteristics for industrial applications.
Tính chất vật lý của 5052 Nhôm
| Tài sản | Giá trị điển hình | Đơn vị |
| Mật độ | 2.68 | g/cm³ |
| Mô đun đàn hồi | 70.3 | Bác sĩ đa khoa |
| Dẫn nhiệt | 138 | W/(m·k) |
| Tinh dân điện | Khoảng. 35 | % IACS |
| Nhiệt dung riêng | Khoảng. 900 | J/(kg·K) |
| Thermal Expansion Coefficient | Khoảng. 23.8 | ×10⁻⁶/K |
| Phạm vi nóng chảy | 607–649 | °C |
| Tỷ lệ Poisson | 0.33 | — |
These properties have several practical implications:
5052 aluminum strip combines mechanical strength, chống ăn mòn, và tính linh hoạt trong chế tạo.
These characteristics make it a practical choice for manufacturers that need lightweight materials with reliable performance in different operating environments.
5052 aluminum provides good resistance to atmospheric corrosion, độ ẩm, and many marine environments.
Its natural oxide film protects the underlying metal, while its magnesium-based composition supports corrosion performance.
This advantage makes it suitable for marine fittings, outdoor equipment, vehicle components, và thùng công nghiệp.
Với mật độ xấp xỉ 2.68 g/cm³, 5052 aluminum offers useful mechanical strength without adding excessive weight.
Different tempers allow manufacturers to adjust the balance between strength and ductility.
This combination helps reduce component weight while maintaining the required mechanical performance in transportation and industrial applications.
5052 dải nhôm hỗ trợ uốn, Dập, tạo hình cuộn, and other common fabrication processes.
O temper provides high ductility for complex forming, while H32 and H34 offer greater strength for moderately formed components.
Choosing the appropriate temper helps manufacturers reduce forming defects and maintain dimensional accuracy.
The alloy supports common aluminum welding methods, bao gồm cả TIG và MIG.
Its weldability makes it useful for fabricated tanks, vỏ thiết bị, linh kiện biển, and other assembled structures.
Proper filler metal selection and welding procedures help maintain joint quality and account for heat-affected-zone softening.
5052 aluminum offers good resistance to repeated loading compared with many general-purpose aluminum alloys.
This characteristic benefits components exposed to vibration and cyclic mechanical stress, including vehicle panels and industrial equipment parts.
5052 aluminum strip can undergo various surface treatments, including anodizing, bức tranh, và lớp phủ, tùy thuộc vào ứng dụng.
These treatments can improve appearance, bảo vệ bề mặt, và khả năng chống lại sự tiếp xúc với môi trường.
For decorative anodizing, Tuy nhiên, buyers should confirm the required surface grade and appearance criteria with the supplier and finishing processor.

Typical-Applications-of-5052-Aluminum-Strip
The combination of strength, chống ăn mòn, mật độ thấp, và tính linh hoạt chế tạo làm cho 5052 aluminum strip suitable for many industrial and commercial products.
Its narrow-width coil form also supports continuous stamping, tạo hình cuộn, and automated component manufacturing.
5052 aluminum performs well in many marine atmospheric environments because of its corrosion resistance and relatively high strength.
Manufacturers use it for selected marine components that require lightweight construction and reliable environmental performance.
Các ứng dụng điển hình bao gồm:
The low density and good formability of 5052 aluminum help manufacturers reduce vehicle weight while maintaining useful mechanical performance.
Its strip form is particularly convenient for continuous fabrication and precision component production.
Các ứng dụng điển hình bao gồm:
5052 aluminum strip offers a practical combination of strength, xây dựng nhẹ, and corrosion resistance for electronic and electrical equipment.
Its formability allows manufacturers to produce enclosures and precision sheet-metal components.
Các ứng dụng điển hình bao gồm:
Industrial equipment often requires materials that can withstand mechanical handling, Tiếp xúc với môi trường, and repeated operation.
5052 aluminum strip meets many of these requirements through its strength and fabrication characteristics.
Các ứng dụng điển hình bao gồm:
5052 aluminum is used in selected tanks, hộp đựng, and fabricated storage equipment because of its corrosion resistance, khả năng hàn, và khả năng định dạng.
Các ứng dụng điển hình bao gồm:
5052 aluminum strip can support architectural fabrication where strength, chống ăn mòn, and surface finishing are important.
Các ứng dụng điển hình bao gồm:
Selecting the right aluminum alloy requires balancing strength, chống ăn mòn, khả năng tạo hình, xử lý bề mặt, và chi phí.
Although several aluminum alloys can be supplied in strip form, their compositions and mechanical characteristics lead to different application advantages.
The following table compares 5052 with four commonly considered aluminum alloys.
| So sánh | 5052 | 5005 | 5083 | 3003 | 6061 |
| Dòng hợp kim | 5000 | 5000 | 5000 | 3000 | 6000 |
| Các yếu tố hợp kim chính | Mg, Cr | Mg | Mg, mn | mn | Mg, Và |
| Khả năng xử lý nhiệt | Không thể xử lý nhiệt | Không thể xử lý nhiệt | Không thể xử lý nhiệt | Không thể xử lý nhiệt | xử lý nhiệt |
| Cấp độ sức mạnh | Trung bình đến cao | Trung bình | Cao | Thấp đến trung bình | High in T6 |
| Chống ăn mòn | Tuyệt vời | Tốt đến xuất sắc | Tuyệt vời | Tốt | Tốt |
| định dạng | Tốt | Tốt | Vừa phải | Tuyệt vời | Vừa phải |
| khả năng hàn | Tốt | Tốt | Tốt | Tốt | Tốt, with strength considerations |
| Anodizing Performance | Tốt | Very good for decorative applications | Good for protective finishes | Generally less preferred for decorative anodizing | Tốt, but appearance may vary |
| Các ứng dụng tiêu biểu | Marine parts, vỏ bọc, vận tải | Trang trí kiến trúc, anodized components | Công trình biển, heavy-duty fabrication | Chế tạo chung, HVAC, Cookware | Thành phần kết cấu, máy móc |
Ghi: These are qualitative comparisons. Hiệu suất thực tế phụ thuộc vào tính khí, Độ dày, hình thức sản phẩm, xử lý, và điều kiện môi trường.

Huawei đóng gói 5052 Dải nhôm
Choosing a reliable 5052 aluminum strip supplier helps ensure consistent material quality, accurate dimensions, and stable delivery.
Buyers should consider manufacturing experience, kiểm soát chất lượng, khả năng tùy biến, and export services.
Hà Nam Huawei Nhôm Co., Ltd. is an experienced aluminum manufacturer and supplier established in 2001.
Với hơn 20 years of industry experience, the company supplies aluminum sheets, cuộn dây, dải, giấy bạc, vòng tròn, and embossed products to customers in more than 70 quốc gia.
Huawei Aluminum can provide 5052 aluminum strip solutions for marine components, thiết bị vận chuyển, vỏ điện, và chế tạo công nghiệp nói chung.
Contact Huawei Aluminum with your required alloy temper, Độ dày, chiều rộng, Số lượng, and application details to receive technical support and a free quotation.
For strip, quality control must confirm two things: that the material is the alloy and temper it claims to be, and that every coil will run properly on your line.
| Sân khấu | Control Points |
| Incoming material | Ingot purity and magnesium source checked and recorded by batch |
| nóng chảy | Spectrometer analysis, magnesium and chromium adjusted before casting, oxide control |
| Đúc | Structure and surface condition |
| Lăn | Thickness gauge, độ phẳng, điều kiện bề mặt |
| Annealing and stabilizing | Temperature and time records, hardness consistency |
| Rạch | Chiều rộng, tình trạng cạnh, chiều cao của mũi khoan, khum lại |
| Bì | Sự che chở, ghi nhãn, coil identification |
| Bài kiểm tra | Mục đích | Typical Method |
| Thành phần hóa học | Confirm 5052 limits, especially Mg and Cr | Optical emission spectrometry |
| Căng, năng suất, độ giãn dài | Verify the ordered temper | Tensile testing |
| Độ cứng | Check uniformity within and between coils | Hardness tester |
| Bend test | Confirm formability for the temper | Bend test to agreed radius |
| độ dày | Confirm gauge and uniformity | Micrometer or thickness gauge |
| Width and camber | Ensure feeding and forming accuracy | Calipers, straightedge methods |
| Độ phẳng | Prevent stamping and press-brake issues | Flatness gauge |
| Bề mặt xuất hiện | Detect scratches, vết bẩn, Dấu cuộn, dầu | Kiểm tra trực quan |
Common references include:
Quan trọng: state only the standards and certificates your company actually holds, and be ready to provide copies. For marine and pressure uses, an unsupported claim is a serious risk.
5052 aluminum strip is a versatile Al-Mg alloy product known for its corrosion resistance, moderate-to-high strength, khả năng định hình tốt, và khả năng hàn.
These properties make it suitable for marine components, thiết bị vận chuyển, vỏ điện, chế tạo công nghiệp, và ứng dụng kiến trúc.
Selecting the right temper and dimensions is essential for achieving the required balance between strength and formability.
Buyers should also pay attention to chemical composition, tính chất cơ học, dung sai kích thước, Chất lượng bề mặt, and coil packaging.
Working with an experienced supplier such as Hà Nam Huawei Nhôm Co., Ltd. can help buyers source customized 5052 aluminum strip and coordinate technical requirements for different applications.
5052 aluminum strip is a 5xxx-series Al-Mg alloy product known for its good corrosion resistance, sức mạnh, khả năng tạo hình, và khả năng hàn.
Đúng. It offers good resistance to atmospheric and marine environments, making it suitable for many outdoor and marine applications.
Những cơn bão phổ biến bao gồm o, H32, H34, H36 ·, và H38. O temper provides better formability, while H tempers offer higher strength.
Đúng. It has good bending and welding performance. The appropriate temper, bán kính uốn cong, and welding method should be selected according to the application.
5083 generally offers higher strength for demanding marine and structural applications, trong khi 5052 provides a good balance of strength, khả năng tạo hình, và chống ăn mòn.
độ dày, chiều rộng, and coil dimensions can be customized according to supplier capabilities and order requirements.
Provide the required temper, Độ dày, chiều rộng, Số lượng, coil specifications, and application details. The supplier can then evaluate your requirements and provide a quotation.
Huawei Aluminium là đối tác đáng tin cậy của bạn về cuộn nhôm 0,5mm, và chúng tôi cam kết đáp ứng nhu cầu nhôm của bạn với nhiều mẫu hợp kim và thông số kỹ thuật.
5454 tấm nhôm có khả năng chống gỉ mạnh và thuộc về 5000 loạt hợp kim nhôm-magiê. 5454 tấm nhôm cũng là một hợp kim không thể xử lý nhiệt và được 20% mạnh hơn 5052 tấm nhôm. Nó thường được sử dụng trong các đường ống của cơ sở hàng hải, thân xe bồn nhôm và các lĩnh vực khác.
Lá nhôm composite là vật liệu chức năng bao gồm lá nhôm và các vật liệu khác. Nó có nhiều đặc tính khác nhau như chất chống oxy hóa, khả năng chịu nhiệt, chống ăn mòn, và cách nhiệt
Vòng tròn nhôm làm đáy nồi thường được gọi là "đĩa nhôm" hoặc "đĩa nhôm." Đây là những phần nhôm hình tròn có thể được sử dụng làm đế hoặc mặt sau của các loại dụng cụ nấu ăn khác nhau., trong đó bao gồm chậu, Chảo, và nồi lọc.
Huawei nhôm là nhà sản xuất dải nhôm hàng đầu tại Trung Quốc, chuyên sản xuất và kinh doanh thép cuộn nhôm, Dải nhôm và lá nhôm.
Khám phá các thuộc tính độc đáo, Quy trình sản xuất, và các ứng dụng phạm vi rộng của 1060 lá nhôm. Tìm hiểu lý do tại sao hợp kim tinh khiết cao này là điều cần thiết trong bao bì, thiết bị điện tử, HVAC, và hơn thế nữa.
Số 52, Đường Dongming, Trịnh Châu, Hà Nam, Trung Quốc
Hà Nam Huawei Nhôm Co., Ltd, Một trong những nhà cung cấp nhôm lớn nhất tại Trung Quốc Hà Nam,Chúng tôi được thành lập vào năm 2001, và chúng tôi có kinh nghiệm phong phú trong xuất nhập khẩu và các sản phẩm nhôm chất lượng cao
Thứ Hai – Thứ Bảy, 8Sáng - 5 giờ chiều
Chủ nhật: Khép kín
Số 52, Đường Dongming, Trịnh Châu, Hà Nam, Trung Quốc
© Bản quyền © 2023 Hà Nam Huawei Nhôm Co., Ltd
Nhận xét mới nhất
Yêu cầu báo giá cho: Và AW 1050 mềm H 111 (3.0255 PL) . phản ánh 20% / tráng men điện phân, anodized không màu 8000 kg 1.5 x 1000 x 2000 Vận chuyển: DAP-CH-Zurich Profalu AG Schlössligasse 1 / CH-7076 Parpan
Ê, Đối với tác phẩm nghệ thuật, tôi đang tìm kiếm lá nhôm dày hơn và không dễ rách, có thể có màu. Chiều rộng tối thiểu khoảng 30 cm. Có thể xem một số mẫu có độ dày khác nhau được không? Không dày hơn 1 mm. Nếu có thể bạn sẽ giúp tôi rất nhiều! Tôi muốn nghe ý kiến từ bạn. Gert Fris, nghệ sĩ thị giác ở Enschede
Chúng tôi cần một số tấm nhôm t111. Chúng tôi đang tìm kiếm các tấm 1/4 inch x 4'x8'
Nhôm 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 chân
Xin chào, rất tốt, tôi đang gọi từ Iran, chúng tôi cần lá vàng 12 micron, rộng 61 cm, khoảng 35 nghìn mét mỗi tháng.