5052 アルミニウム ストリップのサプライヤー

家 » 製品 » アルミニウムストリップ » 5052 アルミニウム ストリップのサプライヤー

Looking for a reliable 5052 aluminum strip supplier? Huawei Aluminum offers customized thicknesses, 幅, 気性が荒い, and coil specifications with strict quality control.

5052 アルミニウム ストリップのサプライヤー

  • 厚さ (mm): 0.20 – 0.50 (許容範囲: ± 5%)
  • 幅 (mm): 20 – 800 (許容範囲: ± 1.0)
  • 長さ: C
  • 材料: アルミニウム マンガン
  • テンパリング: フルソフト (状態) 半分難しい (H24) フルハード (h18)

  E-mail   Wtatsapp   Inquiry

目次 見せる

1. 導入

5052 aluminum strip is a widely used aluminum alloy product valued for its combination of mechanical strength, 耐食性, 製造の柔軟性と.

As a member of the 5000 シリーズ, it uses magnesium as its primary alloying element and belongs to the group of non-heat-treatable aluminum alloys.

Manufacturers can adjust its mechanical properties through cold working and temper control to meet different processing and application requirements.

工業生産において, aluminum strip offers an additional advantage: its narrow and consistent width makes it convenient for continuous processing, スタンピング, ロールフォーミング, and automated manufacturing.

Buyers can specify thickness, 幅, コイル内径, 気性, エッジの状態, and surface finish according to their production requirements.

しかし, selecting the right material involves more than confirming the 5052 alloy designation.

気性, 寸法公差, 表面品質, and mechanical properties all influence processing efficiency and finished-product performance.

A reliable 5052 aluminum strip supplier should therefore provide consistent material quality, accurate slitting, suitable technical documentation, and flexible product specifications.

5052 Aluminum Strip

5052 アルミニウムストリップ

2. とは 5052 アルミニウムストリップ?

2.1 の概要 5052 アルミニウム合金

5052 aluminum is a magnesium-based alloy in the 5000 シリーズ. Its typical magnesium content ranges from 2.2% に 2.8%, while chromium is added in a controlled amount to support its corrosion resistance and metallurgical performance.

Unlike heat-treatable alloys such as 6061, 5052 does not rely on solution heat treatment and artificial aging to achieve its strength.

その代わり, manufacturers primarily adjust its mechanical properties through strain hardening, followed by stabilization where required.

This alloy offers a useful balance of strength, 延性, 耐食性.

It performs particularly well in atmospheric and marine environments, although the actual corrosion performance depends on exposure conditions, 表面状態, and component design.

2.2 What Is Aluminum Strip?

Aluminum strip refers to a narrow, flat-rolled aluminum product supplied in coil form or as cut lengths.

Manufacturers commonly produce it by slitting wider aluminum coils into narrower widths according to customer specifications.

Although aluminum sheet, コイル, and strip share similar rolling processes, they differ mainly in product dimensions and delivery formats.

製品形態 Main Characteristics Typical Supply Form
アルミシート Flat aluminum product with specified thickness and width Individual sheets
アルミコイル Continuous rolled aluminum material in coil form Large coils
アルミニウムストリップ Narrow-width aluminum material, usually slit from wider coils Slit coils or cut strips

3. 5052 Aluminum Strip Specifications

の仕様 5052 aluminum strip determine whether the material can meet a customer’s manufacturing and end-use requirements.

Buyers should evaluate alloy designation, 気性, 厚さ, 幅, コイル寸法, エッジ品質, and surface finish before placing an order.

3.1 Core Specifications of 5052 アルミニウムストリップ

パラメーター 仕様 / 典型的な範囲
商品名 5052 アルミニウムストリップ
Alloy Designation 5052 / AA5052
合金シリーズ 5000 シリーズ
合金の種類 Aluminum-Magnesium Alloy
主な合金要素 マグネシウム (マグネシウム)
製品形態 アルミニウムストリップ / Slit Coil
一般的な気性 ○, H12, H14, H16, H18, H22, H24, H32, H34, H36, H38
厚さの範囲 0.15–10.0 mm, depending on temper and supplier
Common Thickness 0.5–6.0mm
幅の範囲 20–2,650 mm, depending on production capability
Common Standard Widths 1,000 / 1,250 / 1,219 / 1,500 / 1,524 mm
Narrow Strip Width カスタマイズされた, commonly produced by precision slitting
コイル内径 (ID) 一般的に 305 / 405 / 406 / 505 / 508 / 610 mm, subject to availability
Coil Outer Diameter (の) Customized according to coil weight and handling requirements
コイル重量 Customized according to width, 厚さ, and customer requirements
Edge Type Mill Edge / Slit Edge
表面仕上げ ミル仕上げ; other finishes subject to agreement
表面保護 Bare Surface / PE or PVC Film, if specified
抗張力 Approximately 170–305 MPa, depending on temper and thickness
降伏強さ Approximately 65–255 MPa, depending on temper and thickness
伸長 Approximately 3–25%, depending on temper and thickness
密度 約 2.68 g/cm3
弾性率 約 70.3 GPa
耐食性 Good atmospheric and marine corrosion resistance
成形性 良い, particularly in O temper
溶接性 Good with suitable welding procedures
適用規格 ASTM B209, で 485 シリーズ, で 573-3, ギガバイト/トン 3880

4. の化学組成 5052 アルミニウム

の化学組成 5052 aluminum determines many of its important characteristics, 強さも含めて, 耐食性, 成形性, and welding performance.

5052 Aluminum Strip With Bluefilm

5052 Aluminum Strip With Bluefilm

4.1 化学成分表

The following table presents the commonly specified chemical composition limits for 5052 アルミニウム.

の化学組成 5052 アルミニウム (wt。%)

要素 Symbol 構成
アルミニウム アル 残り
マグネシウム マグネシウム 2.2–2.8
クロム Cr 0.15–0.35
ケイ素 そして ≤0.25
鉄 鉄 ≤0.40
銅 銅 ≤0.10
マンガン ん ≤0.10
亜鉛 亜鉛 ≤0.10
その他, それぞれ — ≤0.05
その他, 合計 — ≤0.15

*注記: Values are representative composition limits commonly associated with 5052 アルミニウム.

The applicable standard and its specified edition should govern contractual acceptance.

5. 機械的および物理的性質 5052 アルミニウムストリップ

5.1 機械的性質 5052 Aluminum Strip by Temper

の機械的特性 5052 aluminum strip change significantly with its temper.

Annealed O temper offers high ductility and excellent formability, while strain-hardened H tempers provide higher strength and hardness.

The following table provides representative mechanical property ranges for commonly used tempers.

機械的性質 5052 Aluminum by Temper

気性 抗張力 (MPa) 降伏強さ (MPa) 伸長 (%) ブリネル硬度 (HB)
○ 170–215 65以上 14–20 約. 47
H32 215–265 ≥160 4–10 約. 60
H34 235–285 ≥180 3–8 約. 68
H36 255–305 ≥200 2–4 約. 73
H38 ≥270 ≥220 2–4 約. 77

Reference values compiled from published 5052 alloy datasheets. Actual specified limits and elongation depend on thickness, 製品形態, 試験方法, および適用される規格.

Hardness values are typical rather than universal acceptance requirements.

Several factors should guide temper selection:

  • o気性: Its low strength and high ductility make it suitable for deep drawing, complex bending, and components requiring substantial deformation.
  • H32 テンパー: Provides a practical balance between strength and formability. It is widely used in general sheet-metal fabrication, 輸送コンポーネント, and equipment housings.
  • H34 Temper: Offers higher strength than H32 while retaining useful formability for moderately demanding applications.
  • H36 and H38 Tempers: Provide higher strength and hardness but lower elongation. They are more appropriate for components that require rigidity and undergo limited forming.

For narrow aluminum strips used in continuous stamping or roll forming, temper consistency is particularly important.

Variations in hardness or elongation can affect feeding stability, スプリングバック, 寸法精度, and forming quality.

5.2 の物性 5052 アルミニウムストリップ

5052 aluminum combines low density with useful thermal and electrical properties.

Although it does not offer the same electrical conductivity as commercially pure aluminum, it provides a good balance of physical and mechanical characteristics for industrial applications.

の物性 5052 アルミニウム

財産 典型的な値 ユニット
密度 2.68 g/cm3
弾性率 70.3 GPa
熱伝導率 138 付き(m・K)
電気伝導性 約. 35 % IACS
比熱容量 約. 900 J/(kg・K)
Thermal Expansion Coefficient 約. 23.8 ×10⁻⁶/K
溶解範囲 607–649 ℃
ポアソン比 0.33 —

These properties have several practical implications:

  • 低密度: At approximately 2.68 g/cm3, 5052 aluminum helps reduce component weight compared with steel.
  • 熱性能: Its thermal conductivity supports applications involving heat transfer, 機器のハウジング, and heat exchanger components.
  • Electrical performance: Its conductivity is suitable for selected electrical components, although pure aluminum and copper are generally preferred when maximum conductivity is the priority.
  • 熱安定性: Its thermal expansion should be considered when designing components exposed to temperature changes.

6. 主な利点 5052 アルミニウムストリップ

5052 aluminum strip combines mechanical strength, 耐食性, 製造の柔軟性と.

These characteristics make it a practical choice for manufacturers that need lightweight materials with reliable performance in different operating environments.

6.1 優れた耐食性

5052 aluminum provides good resistance to atmospheric corrosion, 水分, and many marine environments.

Its natural oxide film protects the underlying metal, while its magnesium-based composition supports corrosion performance.

This advantage makes it suitable for marine fittings, outdoor equipment, vehicle components, および産業用エンクロージャ.

6.2 高い強度重量比

約の密度で 2.68 g/cm3, 5052 aluminum offers useful mechanical strength without adding excessive weight.

Different tempers allow manufacturers to adjust the balance between strength and ductility.

This combination helps reduce component weight while maintaining the required mechanical performance in transportation and industrial applications.

6.3 Good Formability and Bendability

5052 アルミニウムストリップは曲げをサポートします, スタンピング, ロールフォーミング, and other common fabrication processes.

O temper provides high ductility for complex forming, while H32 and H34 offer greater strength for moderately formed components.

Choosing the appropriate temper helps manufacturers reduce forming defects and maintain dimensional accuracy.

6.4 Reliable Welding Performance

The alloy supports common aluminum welding methods, TIGとMIGを含む.

Its weldability makes it useful for fabricated tanks, 機器のハウジング, 海洋部品, and other assembled structures.

Proper filler metal selection and welding procedures help maintain joint quality and account for heat-affected-zone softening.

6.5 良好な疲労抵抗

5052 aluminum offers good resistance to repeated loading compared with many general-purpose aluminum alloys.

This characteristic benefits components exposed to vibration and cyclic mechanical stress, including vehicle panels and industrial equipment parts.

6.6 Versatile Surface Finishing

5052 aluminum strip can undergo various surface treatments, including anodizing, 絵画, そしてコーティング, アプリケーションに応じて.

These treatments can improve appearance, 表面保護, 環境暴露に対する耐性.

For decorative anodizing, しかし, buyers should confirm the required surface grade and appearance criteria with the supplier and finishing processor.

Typical-Applications-of-5052-Aluminum-Strip

Typical-Applications-of-5052-Aluminum-Strip

7. 代表的な用途 5052 アルミニウムストリップ

The combination of strength, 耐食性, 低密度, 製造の柔軟性により、 5052 aluminum strip suitable for many industrial and commercial products.

Its narrow-width coil form also supports continuous stamping, ロールフォーミング, and automated component manufacturing.

7.1 Marine and Shipbuilding

5052 aluminum performs well in many marine atmospheric environments because of its corrosion resistance and relatively high strength.

Manufacturers use it for selected marine components that require lightweight construction and reliable environmental performance.

代表的なアプリケーションには次のものがあります。:

  • Boat fittings and fabricated components.
  • Marine equipment covers and housings.
  • Interior panels and trim components.
  • Protective enclosures and brackets.

7.2 自動車と輸送

The low density and good formability of 5052 aluminum help manufacturers reduce vehicle weight while maintaining useful mechanical performance.

Its strip form is particularly convenient for continuous fabrication and precision component production.

代表的なアプリケーションには次のものがあります。:

  • Vehicle body panels and interior components.
  • Truck and trailer panels.
  • Fuel tank components, where permitted by the design.
  • Protective covers and brackets.
  • Transportation equipment housings.

7.3 Electronics and Electrical Equipment

5052 aluminum strip offers a practical combination of strength, 軽量構造, and corrosion resistance for electronic and electrical equipment.

Its formability allows manufacturers to produce enclosures and precision sheet-metal components.

代表的なアプリケーションには次のものがあります。:

  • Electrical cabinet components.
  • Electronic equipment housings.
  • Control panel covers.
  • Instrument enclosures.
  • Protective shielding and structural parts.

7.4 Industrial Equipment and Machinery

Industrial equipment often requires materials that can withstand mechanical handling, 環境曝露, and repeated operation.

5052 aluminum strip meets many of these requirements through its strength and fabrication characteristics.

代表的なアプリケーションには次のものがあります。:

  • Machine covers and protective panels.
  • Equipment housings.
  • Fabricated brackets and mounting components.
  • Ventilation equipment parts.
  • Industrial enclosures and guards.

7.5 Pressure Vessels and Storage Equipment

5052 aluminum is used in selected tanks, コンテナ, and fabricated storage equipment because of its corrosion resistance, 溶接性, と成形性.

代表的なアプリケーションには次のものがあります。:

  • Fuel and liquid storage tanks.
  • Selected chemical storage containers.
  • Transport tank components.
  • Welded industrial vessels.

7.6 建築および装飾部品

5052 aluminum strip can support architectural fabrication where strength, 耐食性, and surface finishing are important.

代表的なアプリケーションには次のものがあります。:

  • Building trim and decorative strips.
  • Exterior equipment covers.
  • Fabricated architectural components.
  • Anodized or coated panels and profiles.

8. 5052 アルミニウムストリップ vs. 他のアルミニウム合金

Selecting the right aluminum alloy requires balancing strength, 耐食性, 成形性, 表面処理, そしてコスト.

Although several aluminum alloys can be supplied in strip form, their compositions and mechanical characteristics lead to different application advantages.

8.1 Comparison of Key Characteristics

The following table compares 5052 with four commonly considered aluminum alloys.

比較 5052 5005 5083 3003 6061
合金シリーズ 5000 5000 5000 3000 6000
主な合金要素 マグネシウム, Cr マグネシウム マグネシウム, ん ん マグネシウム, そして
熱処理性 非熱処理 非熱処理 非熱処理 非熱処理 熱処理可能
強度レベル 中~高 中くらい 高い 低から中程度 High in T6
耐食性 素晴らしい 良いから素晴らしい 素晴らしい 良い 良い
成形性 良い 良い 適度 素晴らしい 適度
溶接性 良い 良い 良い 良い 良い, with strength considerations
Anodizing Performance 良い Very good for decorative applications Good for protective finishes Generally less preferred for decorative anodizing 良い, but appearance may vary
代表的なアプリケーション Marine parts, エンクロージャー, 交通機関 建築装飾, anodized components 海洋構造物, heavy-duty fabrication 一般的な製造, 空調設備, 調理器具 構造コンポーネント, 機械

注記: These are qualitative comparisons. 実際のパフォーマンスは気質に左右される, 厚さ, 製品形態, 処理, および環境条件.

Huawei Packaged 5052 Aluminum Strip

Huaweiパッケージ版 5052 アルミニウムストリップ

9. China High-Quality 5052 Aluminum Strip Supplier – Huawei Aluminum

Choosing a reliable 5052 aluminum strip supplier helps ensure consistent material quality, accurate dimensions, and stable delivery.

Buyers should consider manufacturing experience, 品質管理, カスタマイズ機能, and export services.

河南華為アルミニウム有限公司, 株式会社. is an experienced aluminum manufacturer and supplier established in 2001.

以上で 20 years of industry experience, the company supplies aluminum sheets, コイル, ストリップ, ホイル, サークル, and embossed products to customers in more than 70 国.

9.1 Huaweiアルミニウムを選ぶ理由?

  • Customized Specifications: Supports different alloy tempers, 厚さ, 幅, and coil dimensions according to order requirements.
  • Processing Capabilities: Offers aluminum processing services such as slitting, カラーコーティング, エンボス加工, 陽極酸化処理, and mirror finishing for applicable products.
  • 品質管理: Focuses on chemical composition, 寸法精度, 機械的性質, そして表面品質.
  • Export Experience: より多い 20 years of aluminum industry experience and international business experience across 70+ 国.

Huawei Aluminum can provide 5052 aluminum strip solutions for marine components, 輸送機器, 電気エンクロージャ, および一般的な工業用製造.

Contact Huawei Aluminum with your required alloy temper, 厚さ, 幅, 量, and application details to receive technical support and a free quotation.

10. Quality Control and Inspection Standards

For strip, quality control must confirm two things: that the material is the alloy and temper it claims to be, and that every coil will run properly on your line.

10.1 Raw material and in-process control

ステージ Control Points
Incoming material Ingot purity and magnesium source checked and recorded by batch
溶融 Spectrometer analysis, magnesium and chromium adjusted before casting, oxide control
鋳造 Structure and surface condition
ローリング Thickness gauge, 平坦度, 表面状態
Annealing and stabilizing Temperature and time records, hardness consistency
スリッティング 幅, エッジの状態, バリ高さ, キャンバー
パッキング 保護, ラベリング, coil identification

10.2 Finished strip tests

テスト 目的 Typical Method
化学組成 Confirm 5052 limits, especially Mg and Cr Optical emission spectrometry
引張, 収率, 伸長 Verify the ordered temper Tensile testing
硬度 Check uniformity within and between coils Hardness tester
Bend test Confirm formability for the temper Bend test to agreed radius
厚さ Confirm gauge and uniformity Micrometer or thickness gauge
Width and camber Ensure feeding and forming accuracy Calipers, straightedge methods
平面度 Prevent stamping and press-brake issues Flatness gauge
表面の外観 Detect scratches, 汚れ, ロールマーク, 油 目視検査

10.3 Standards and compliance topics

Common references include:

  • Aluminum standards: ASTM B209, で 485, で 573, ギガバイト/トン 3880
  • 品質管理: ISO 9001, only if actually held
  • Environmental and chemical rules: RoHS and REACH statements, where applicable and supportable
  • Marine and pressure applications: classification society approvals (such as CCS, DNV, ABS, or LR) or pressure vessel material approvals, only if genuinely held

重要: state only the standards and certificates your company actually holds, and be ready to provide copies. For marine and pressure uses, an unsupported claim is a serious risk.

11. 結論

5052 aluminum strip is a versatile Al-Mg alloy product known for its corrosion resistance, moderate-to-high strength, 良好な成形性, 溶接性.

These properties make it suitable for marine components, 輸送機器, 電気エンクロージャ, 工業製造, および建築用途.

Selecting the right temper and dimensions is essential for achieving the required balance between strength and formability.

Buyers should also pay attention to chemical composition, 機械的性質, 寸法公差, 表面品質, and coil packaging.

Working with an experienced supplier such as 河南華為アルミニウム有限公司, 株式会社. can help buyers source customized 5052 aluminum strip and coordinate technical requirements for different applications.

よくある質問

1. とは 5052 アルミストリップ?

5052 aluminum strip is a 5xxx-series Al-Mg alloy product known for its good corrosion resistance, 強さ, 成形性, 溶接性.

2. は 5052 aluminum strip corrosion-resistant?

はい. It offers good resistance to atmospheric and marine environments, making it suitable for many outdoor and marine applications.

3. What tempers are available?

一般的なテンパーにはoが含まれます, H32, H34, H36, とH38. O temper provides better formability, while H tempers offer higher strength.

4. できる 5052 aluminum strip be bent and welded?

はい. It has good bending and welding performance. The appropriate temper, 曲げ半径, and welding method should be selected according to the application.

5. 違いは何ですか 5052 そして 5083 アルミニウム?

5083 generally offers higher strength for demanding marine and structural applications, その間 5052 provides a good balance of strength, 成形性, 耐食性.

6. What sizes are available?

厚さ, 幅, and coil dimensions can be customized according to supplier capabilities and order requirements.

7. どうすれば見積もりを取得できますか 5052 アルミストリップ?

Provide the required temper, 厚さ, 幅, 量, coil specifications, and application details. The supplier can then evaluate your requirements and provide a quotation.

返信を残す

あなたのメールアドレスが公開されることはありません. 必須フィールドは、マークされています *

最新のコメント

  • プロファル・アグ・サイード:
    見積もりを依頼する: そしてAW 1050 ソフトH 111 (3.0255 PL) . 反射性の 20% / 電解釉薬, 無色アルマイト処理 8000 kg 1.5 バツ 1000 バツ 2000 配達: DAP-CH-Zurich Profalu AG Schlössligasse 1 / CH-7076 パルパン
  • ガート・フリス・サイド:
    こんにちは, アート制作用に、破れにくい厚めのアルミホイルを探しています。, おそらく着色された. 最小幅約 30 cm. 異なる厚さのサンプルをいくつか見ることはできますか? より厚くない 1 mm. もしできるなら、あなたは私を大いに助けてくれるでしょう! あなたからの意見を聞きたいです. ゲルト・フリス, エンスヘーデのビジュアルアーティスト
  • ボブ・サイード:
    T111アルミニウムプレートが必要です. 4分の1インチ×4フィート×8フィートのシートを探しています
  • ナルエフォン・サイード:
    アルミニウム 5754 H111 หนา 8 mm กว้าง x ยาว : 4 バツ 6 足
  • アリレザ・モクタリアン・サイード:
    こんにちは、とてもよかったです。イランから電話しています。12 ミクロンの金箔、幅 61 cm、月に約 35,000 メートル必要です。
  • 人気の製品

    これは当社のベストセラー製品です

    powder coated aluminum sheet

    パワーコートアルミニウムシート

    粉体塗装アルミニウム板とは、粉体吹付け法により加工されたアルミニウム板を指します。;

    3004 aluminum foil Dubai

    3004 アルミホイルドバイ

    プレミアムを取得します 3004 アルミホイルドバイ, パッケージに最適です, 工事, および産業用途. 軽量, 耐食性, そして非常に耐久性があります!

    Pvdf Coated Aluminum Coil

    Pvdf コーティングされたアルミニウム コイル

    Pvdf コーティングされたアルミニウム コイルは、カラー コーティングされたアルミニウム コイルの 1 つのタイプです。, カラーコーティングされたアルミニウムコイルはポリエステルに分割可能 (PE) コーティングされたアルミニウムコイル, フロロカーボン (PVDF) コーティングされたアルミニウムコイルとエポキシローラーコーティングされたアルミニウムコイル.

    5000 series aluminum alloy sheet-1

    5000 シリーズアルミニウム合金

    5000 シリーズアルミニウム合金は、高強度で耐食性に優れたAl-Mg合金シリーズです。. 船舶の製造によく使用されます, オイルタンク, 船, 自動車, 建材・その他の分野.

    3003 H14 Aluminum Coil

    3003 H14 アルミコイル

    3003 h14 アルミニウム コイルは、h14 焼き戻しを指します。 3003 アルミニウムコイル。そしてH14焼き戻しは通常、取得することを意味します 1/2 硬さによる強さ.

    Huawei 5052 Aluminum Strip

    5052 アルミニウム ストリップのサプライヤー

    Looking for a reliable 5052 aluminum strip supplier? Huawei Aluminum offers customized thicknesses, 幅, 気性が荒い, and coil specifications with strict quality control.

    私たちのオフィス

    No.52, 東明路, 鄭州, 河南省, 中国

    私達に電子メールを送り

    [email protected]

    お電話ください

    +8618137782032

    ファルー

    河南華為アルミニウム有限公司, 株式会社, 中国河南省最大のアルミニウムサプライヤーのひとつ,私たちは2001年に設立され、輸出入と高品質のアルミニウム製品の豊富な経験があります

    営業時間:

    月~土, 8午前 – 午後 5 時

    日曜日: 閉まっている

    連絡する

    No.52, 東明路, 鄭州, 河南省, 中国

    +8618137782032

    [email protected]

    返信を残す

    あなたのメールアドレスが公開されることはありません. 必須フィールドは、マークされています *

    © 著作権© 2023 河南華為アルミニウム有限公司, 株式会社

    お電話ください

    私達に電子メールを送り

    ワッツアップ

    問い合わせ