1050 aluminum sheet is a kind of non-heat-treated aluminum plate, which has good plasticity, corrosion resistance, electrical conductivity and thermal conductivity after cold working;
1050 is a kind of aluminum alloy state, 1050 aluminum is a kind of 1000 series pure aluminum；
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: each other |
Others: total |
Al: Min. |
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | – | 0.05 | 0.03 | 0.03 | – | 99.50 |
| 1050A | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | – | 0.07 | 0.05 | 0.03 | – | 99.50 |
1000 stand for 1000 series pure aluminum;
50 stand for Aluminum content 99.5%;
In the same way, you can also understand the meaning of 1060 aluminum sheet and 1070；
GB/T3190-1996, ASTM B209, EN 573, EN 485
This alloy is typically used in applications requiring maximum ductility and moderate strength.
Its Performance characteristics include:
Huawei Aluminum has 21 years of experience in the production and export of aluminum sheets, and has very strict requirements for the production and quality control of aluminum sheets.
1050 aluminum plate is a kind of non-heat-treated aluminum plate, which has good plasticity, corrosion resistance, electrical conductivity and thermal conductivity after cold working;
However, the strength is low, and the heat treatment cannot strengthen the machinability.
1050 aluminum sheet surface inspection
| Physical Property | Value |
| Density | 2.71 g/cm³ |
| Melting Point | 650 °C |
| Thermal Expansion | 24 x10^-6 /K |
| Modulus of Elasticity | 71 GPa |
| Thermal Conductivity | 222 W/m.K |
| Electrical Resistivity | 0.0282 x10^-6 Ω .m |
| Alloy Temper | Specified | Tensile strength | Yield strength | Elongation | ||||||||
| Thickness(mm) | (MPa) | (MPa) | (%) | |||||||||
| 1050-O/ 1050-H111 | 0.2-0.5mm | 65-95 | Min20 | Min20 | ||||||||
| 0.5-1.5mm | Min22 | |||||||||||
| 1.5-3.0mm | Min26 | |||||||||||
| 3.0-6.0mm | Min29 | |||||||||||
| 6.0-12.5mm | Min35 | |||||||||||
| 12.5-80.0mm | ||||||||||||
| 1050-H112 | 6.0-12.5mm | Min75 | Min30 | Min20 | ||||||||
| 12.5-80.0mm | Min70 | Min25 | ||||||||||
| 1050-H12 | 0.2-0.5mm | 85-125 | Min65 | Min2 | ||||||||
| 0.5-1.5mm | Min4 | |||||||||||
| 1.5-3.0mm | Min5 | |||||||||||
| 3.0-6.0mm | Min7 | |||||||||||
| 6.0-12.5mm | Min9 | |||||||||||
| 12.5-40.0mm | ||||||||||||
| 1050-H14 | 0.2-1.5mm | 105-145 | Min85 | Min2 | ||||||||
| 1.5-3.0mm | Min4 | |||||||||||
| 3.0-6.0mm | Min5 | |||||||||||
| 6.0-12.5mm | Min6 | |||||||||||
| 12.5-25mm | ||||||||||||
| 1050-H16 | 0.2-0.5mm | 120-160 | Min100 | Min1 | ||||||||
| 0.5-1.5mm | Min2 | |||||||||||
| 1.5-4.0mm | Min3 | |||||||||||
| 1050-H18 | 0.2-0.5mm | Min135 | Min120 | Min1 | ||||||||
| 0.5-1.5mm | Min140 | Min2 | ||||||||||
| 1.5-3.0mm | Min2 | |||||||||||
| 1050-H19 | 0.2-0.5mm | Min155 | Min140 | Min1 | ||||||||
| 0.5-1.5mm | Min150 | Min130 | ||||||||||
| 1.5-3.0mm | ||||||||||||
| 1050-H22 | 0.2-0.5mm | 85-125 | Min55 | Min4 | ||||||||
| 0.5-1.5mm | Min5 | |||||||||||
| 1.5-3.0mm | Min6 | |||||||||||
| 3.0-6.0mm | Min11 | |||||||||||
| 6.0-12.5mm | Min12 | |||||||||||
| 1050-H24 | 0.2-0.5mm | 105-145 | Min75 | Min3 | ||||||||
| 0.5-1.5mm | Min4 | |||||||||||
| 1.5-3.0mm | Min5 | |||||||||||
| 3.0-6.0mm | Min8 | |||||||||||
| 6.0-12.5mm | ||||||||||||
| 1050-H26 | 0.2-0.5mm | 120-160 | Min90 | Min2 | ||||||||
| 0.5-1.5mm | Min3 | |||||||||||
| 1.5-4.0mm | Min4 | |||||||||||
| 1050-H28 | 0.2-0.5mm | Min140 | Min110 | Min2 | ||||||||
| 0.5-1.5mm | ||||||||||||
| 1.5-3.0mm | Min3 | |||||||||||
1050 aluminium alloy Wikipedia
 |
 |
 |
 |
Huawei Aluminum strictly controls product quality to ensure the interests of customers.
1050 aluminum plate is often used in daily necessities, lighting fixtures, reflectors, decorations, chemical industry containers, chemical equipment, sheet metal processing parts, heat sinks, deep-drawn or spinning concave utensils, welded parts, heat exchangers, clock surfaces and disk surfaces , kitchenware, decorations, reflective appliances, signs, electronics, lamps, nameplates, electrical appliances, stamping parts and other products;
Aluminum for bottle caps
It can be used as electrical aluminum, such as busbars, wires, cables, and electronic parts; it can be used as heat exchangers, chemical equipment; packaging supplies for food and medicine such as cigarettes, tea, sugar, and deep-drawn products such as beer keg; , ceilings, partition walls, sound-absorbing and thermal insulation materials, as well as household appliances, cooking utensils, etc. In buildings, it is used for roof panels, ceilings, partition walls, sound-absorbing and heat-insulating materials, as well as household utensils, cooking utensils, etc.
1050 aluminum sheet road sign
Learn how non-stick aluminum foil works, its high-performance coatings, heat resistance, and benefits in food safety and sustainability. A must-read guide for chefs and manufacturers.
Aluminium circle for cookwares typically refers to a circular-shaped piece or circle made from aluminum that is used in the manufacturing of various types of cookware, such as pots, pans, and cooking utensils.
Welcome to Huawei Aluminum, your trusted source for high-quality aluminum coils designed specifically for aluminium roofing sheets.
Aluminum circle for cookware bottoms are normally called "aluminum disc" or "aluminum disk." these are circular portions of aluminum which might be used because the base or backside of various forms of cookware, which includes pots, pans, and strain cookers.
5454 aluminum sheet has strong anti-rust ability and belongs to the 5000 series aluminum-magnesium alloy. 5454 aluminum sheet is also a non-heat treatable alloy and is 20% stronger than 5052 aluminum sheet. It is often used in marine facilities pipelines, aluminum tank car bodies and other fields.
Hydrophilic aluminum foil is obtained by coating the surface of aluminum foil with hydrophilic coating, the purpose is to improve the hydrophilic (water-attracting) performance of the aluminum foil, and it has higher heat transfer efficiency and corrosion resistance.
No.52, Dongming Road, Zhengzhou, Henan, China
Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products
Mon – Sat, 8AM – 5PM
Sunday: Closed
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Latest Comments
We need some t111 aluminium plate. We are looking for quarter inch by 4'x8' sheets
Dear Sales Manager, I hope this email finds you well. This is Min-Hyung Lee, CEO of Taesan Steel Co., Ltd., an import & export company based in Incheon, South Korea, dealing in steel and aluminum materials. We understand that Henan Huawei Aluminum produces 1100 aluminum coils in H16 temper from 0.2 mm thickness at your mill in Gongyi, Henan. We use mill finish aluminum coil as a substrate for coating in Korea, and are looking for a reliable Chinese mill for regular monthly imports. We would appreciate your quotation for the material below, based on current market prices. 1. Material - Alloy / Temper: A1100 – H16 (A1235 or A1050 acceptable subject to prior approval) - Standard: KS D 6701 or equivalent (JIS H 4000, ASTM B209, GB/T 3880 accepted) - Surface: mill finish (as-rolled), suitable for painting/coating 2. Ordered sizes - 0.45 mm x 1,120 mm x Coil (main size) - 0.60 mm x 1,060 mm x Coil - No minus tolerance on thickness (e.g., actual 0.45 mm or above for the 0.45 mm order) 3. Coil weight: approx. 3-6 MT per coil 4. Quantity: 30-40 MT per month (estimated 360-480 MT per year) 5. Price terms: CIF Incheon Port or Pyeongtaek Port, South Korea, in USD (USD/kg or USD/MT). A formula-based quotation (e.g., SMM ingot price + processing cost) is also acceptable, provided the total is given on a CIF basis (or FOB with ocean freight shown separately). Please include the following in your quotation: 1. Unit price (CIF Incheon or Pyeongtaek, in USD) 2. MOQ per size 3. Lead time (order to shipment) 4. Payment terms 5. Whether the material is DC or CC rolled, and producible thickness/width range for 1xxx alloys 6. Mill information (location, ISO 9001 or other certifications) 7. Sample availability and conditions (we plan a coating trial before regular orders) 8. Confirmation that a Mill Test Certificate (chemical composition and mechanical properties) will be provided with each shipment Our plan is to review your quotation and material specification first, then request samples for a coating trial. If the results are satisfactory, we intend to place regular monthly orders. We are also willing to visit your mill in China in person to see the production line and discuss the details of a long-term partnership. The detailed specification (SPEC-AL-2026-01) is attached for your reference. We look forward to your reply. Best regards, Min-Hyung Lee CEO | Taesan Steel Co., Ltd. Email: [email protected] Tel: 82 10 5048 5768 WeChat: dolf369
Aluminum 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต
سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر
Dear Sales Team, I hope you are doing well. We are looking to source aluminum products from your company and would appreciate receiving your best quotation for the following: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available standard sheet sizes. Kindly quote the price per sheet and the price per metric ton. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available coil widths, standard coil weights, and inner diameter specifications. Kindly quote the price per metric ton. For both sheets and coils, please include: Available alloys (e.g. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (including sea freight), or alternatively provide both FOB China and CIF Jebel Ali Port, UAE prices. If available, please also send: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. We are interested in establishing a long-term business relationship. Our initial purchase volume is expected to be 100+ metric tons, with the potential for larger and recurring orders if your pricing, quality, and service meet our requirements. Thank you for your time. We look forward to receiving your quotation and hope to build a successful long-term partnership. Best regards, Eng.Yousef