3003 aluminijasto ploščo in 1060 veščine identifikacije aluminijastih plošč

3003 aluminijasto ploščo in 1060 veščine identifikacije aluminijastih plošč

Strankam, ki so šele začele uporabljati aluminijaste plošče, je velik problem razlikovati med njimi 3003 aluminijasto ploščo in 1060 aluminijasta plošča. Many customers don’t understand it. pravzaprav, it is very simple. Let’s analyze the identification skills of 3003 aluminijasto ploščo in 1060 aluminum plate from the following aspects.

3003 aluminijasto ploščo in 1060 veščine identifikacije aluminijastih plošč

3003 aluminijasto ploščo in 1060 veščine identifikacije aluminijastih plošč: videz

If you don’t look carefully, you may not see the reason. But if you put it outdoors with 1060 aluminijasta plošča in 3003 aluminijasta plošča. You should be surprised when you compare and watch. 3003 aluminum plate contains manganese element, obračunavanje približno 1.0-1.8%, so the appearance difference between 3003 aluminijasto ploščo in 1060 aluminum plate is a very obvious point, to je, the surface of 3003 aluminum plate will be grayer, especially under the sun, it is particularly prominent. This is also the identification method of the detailed difference between the appearance of 3003 aluminijasto ploščo in 1060 aluminijasta plošča.

3003 aluminijasto ploščo in 1060 veščine identifikacije aluminijastih plošč: trdota

In the appearance section, we said that the hardness of 3003 aluminum plate is grayish black because it contains manganese. Let’s compare the H24 state of 3003 aluminum plate and the H24 state of 1060 aluminijasta plošča. If you have a handheld hardness tester, you can clearly know that the hardness of 3003 aluminijasta plošča je višja od tiste pri 1060 aluminijasta plošča. Trdota 3003 aluminum plate is generally in the data range of about 30-35. Ampak 1060 aluminum plate is different, because the aluminum content of 1060 aluminum plate is as high as 99.60%, torej 1060 aluminum plate is softer than 3003 aluminijasta plošča, and the difference is about 20%. Zato, this is also a good technique to identify the difference between 3003 aluminijasto ploščo in 1060 aluminijasta plošča.

Spectrometer for identifying 3003 aluminijasto ploščo in 1060 aluminijasta plošča

Using spectrometer data to analyze 3003 aluminijasto ploščo in 1060 aluminum plate is a very normal method, but many customers or trade distributors do not need to have a spectrometer for detection. Zato, in terms of 3003 aluminijasto ploščo in 1060 aluminijasta plošča, there may not be many people who use this method to identify. Vendar, it must be admitted that this is a relatively fast and the most standard and stable method among these methods.

Typical uses of identification techniques for 3003 aluminijasto ploščo in 1060 aluminijasta plošča

This identification method may require customers to have a suggested understanding of the product’s use environment, as well as the product’s use place, area, itd. 3003 aluminum plate is suitable for building exterior walls, automobile linings, bus low linings, product outsourcing, itd. 1060 aluminum plate is relatively soft, so it is more commonly used in insulation pipes, stropne ploščice, suspended ceilings, and lamp stamping. It is not difficult to find that the use of aluminum plates mainly depends on the performance differences between the two.

The above is the tips that our aluminum plate manufacturers teach you on how to quickly and effectively identify 3003 aluminijaste plošče in 1060 aluminijaste plošče. The “appearance identification method”, “hardness identification method”, “spectrometer identification method” and “typical use identification method” we mentioned are all relatively effective methods for identifying these two types of aluminum plates.

More Products:https://aludepot.com/product/