Table Of Contents Show

Why Is The 3004 Aluminum Coil So Popular?

3004 aluminum coil is an aluminum-manganese alloy, which is the most widely used anti-rust aluminum. The strength of this alloy is not high. It is similar to 3003 alloys with about 1% magnesium added.

3004 aluminum coil near me

The strength of this alloy is not high (slightly higher than that of industrial pure aluminum) and cannot be strengthened by heat treatment, so a cold working method to improve its mechanical properties is used: it has high plasticity in the annealed state, good plasticity in semi-cold hardening, and plasticity in cold hardening. Low, good corrosion resistance, good weldability, good cutting performance.

It is usually rolled and extruded (used to make beverage cans), but not usually forged. As a wrought alloy, not for casting.

3004 Aluminium Coil Inventory

Reference Parameters of 3004 Aluminiumspole

3004 Aluminium Alloy Composition by Mass(%)
Al	Mg	Si	Fe	Cu	Zn	Mn	Remainder
95.6 to 98.2%	0.8 to 1.3%	0.3% max	0.7% max	0.25% max	0.25% max	1.0 to 1.5%	0.15% max

From:

Alternate designations include 3.0526 and A93004. 3004 aluminium and its various tempers are discussed in the following standards:^[1]

ASTM B 209: Standard Specification for Aluminium and Aluminium-Alloy Sheet and Plate
ASTM B 221: Standard Specification for Aluminium and Aluminium-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B 547: Standard Specification for Aluminium and Aluminium-Alloy Formed and Arc-Welded Round Tube
ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates

Mechanical properties of 3004 Aluminium Alloy
Temper	Specified Thickness(in)	Tensile Strength – KSI				Elongationin 2 tum %
		Ultimate		Yield
		Min	Max	Min	Max
H12	0.008 – 0.020	27.6	34.8	–	–	2
	0.020 – 0.059					3
	0.059 – 0.118					4
	0.118 – 0.236					5
	0.236 – 0.394					–
H14	0.008 – 0.020	31.9	38.4	–	–	1
	0.020 – 0.059					2
	0.059 – 0.118					2
	0.118 – 0.250					3
H16	0.008 – 0.020	34.8	41.3	–	–	1
	0.020 – 0.059					1
	0.059 – 0.118					2
	0.118 – 0.250					2
H18	0.008 – 0.020	37.7	–	–	–	1
	0.020 – 0.059					1
	0.059 – 0.118					–
	0.118 – 0.250					–
H19	0.008 – 0.020	39.2	–	–	–	1
	0.020 – 0.059					1
	0.059 – 0.118					–
	0.118 – 0.250					–
H22/32	0.008 – 0.020	27.6	34.8	–	–	4
	0.020 – 0.059					5
	0.059 – 0.118					6
	0.118 – 0.250					7
	0.236 – 0.394					–
H24/34	0.008 – 0.020	31.9	38.4	–	–	3
	0.020 – 0.059					4
	0.059 – 0.118					4
	0.118 – 0.250					–
H26/36	0.008 – 0.020	34.8	41.3	–	–	3
	0.020 – 0.059					3
	0.059 – 0.118					3
	0.118 – 0.250					–
H28/38	0.008 – 0.020	37.7	–			2
	0.020 – 0.059					3
	0.059 – 0.118					–
	0.118 – 0.250					–
O/H111	0.008 – 0.020	22.5	29	–		13
	0.020 – 0.059					14
	0.059 – 0.118					15
	0.118 – 0.250					16

The Performance Advantages of 3004 Alloy Aluminum Coil

Excellent anti-rust performance, is a widely used anti-rust aluminum;
Excellent forming processing characteristics, high corrosion resistance, good weldability and electrical conductivity, strength higher than 1100;

Advantages of 3004 Aluminiumspole

Smooth surface, good plasticity and pressure resistance;

The power battery shell is the first choice plate, which is impact-resistant, not easy to crack and leak, and meets the strength and stiffness requirements of the power battery shell.

3004 vs 3003 Aluminum Coil – Which is Better to Choose?

Excellent punching ability and good oxidation, its surface can be anodized to improve hardness and wear resistance, at the same time it also gives a bright and colorful surface. And it has been improved on the basis of 3003 aluminium. Harder than 3003.

What Are The Main Uses of 3004 Aluminiumspole?

3004 aluminum coils are mainly used in chemical products and storage devices, building materials, cable pipes, sewers, various lamps, beverage cans, wave plates, color aluminum plates, lamp holders, etc.

Latest Comments

快速　竜 Said:
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります又、そのような製品があるようでしたらその重量、価格をおしえていただけますか現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます出来ましたらメールでお返事をいただけますか

快速　竜 Said:
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚み　で曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※約1000mmの側溝に渡して200kg耐えられるかとなりますその製品の重量、価格をおしえていただけますか

Mor Said:
Hi, do you have laser-engraved black anodized aluminum certified for outdoor use?

Oliver Erkens Said:
Sehr geehrte Damen und Herrn, Wir sind auf der Suche nach Oxidiertenm Aluminium Platten material für einen Architektenentwurf den wir anbieten. Die Architektin möchte "altes und Oxidiertes" Alu Materail einsetzten um den Vintage-Look ihres Entwurfs zu ergänzen (mit Vintage Spiegeln optik wie alte Spiegel die zum teil "blind" sind! Wir würden uns freuen wenn sie uns bei diesem Thema unterstützen könnten. Mit freundlichen Grüßen aus Düsseldorf, Oliver Erkens Projektleiter Tel.: +49 (0)211 41 79 34-24 Fax: +49 (0)211 41 79 34-33 Mobil: +49 (0)170 91 50 320 E-Mail:[email protected] Web: www.bs-exhibitions.de

Nicola Said:
Buonasera , abbiamo interesse ad acquistare i vostri materiali, siamo una trading di prodotti in alluminio.