6061 aluminiumplåt

Take you to know 6061 Aluminiumplåt

6061 Aluminum sheet is an al-si-mg alloy that has been strengthened by precipitation hardening. 6061 aluminium har ett högt förhållande mellan hållfasthet och vikt, över genomsnittet korrosionsbeständighet, god bearbetbarhet, och lämpar sig väl för svetsning.

6061 T6 Aluminum Sheet（AL-SI-MG）

Aluminiumplåt 6061 is a thin, flat shaped sheet.

6061 Aluminum sheet is the most versatile heat treatable aluminum alloy. After heat treatment, its strength is comparable to low carbon steel.

It was originally developed in 1935 and continues to appear in a wide range of general-purpose applications today. It is often used in applications utilizing welding or brazing.

6061 Aluminum Sheet Surface Display

Legering 6061 aluminum coil and sheet is the most widely used heat treatable aluminum alloy. Although lower in strength than most 2xxx and 7xxx alloys, 6061 aluminum offers a wide range of mechanical properties and corrosion resistance and can be fabricated by many common methods. In the “O” tempered or annealed condition, 6061 alloy has good formability. In the T4 condition, rather severe molding is possible; dock, in the T6 temper, these properties can be obtained by artificial aging.

Formulärkälla：https://www.alufoil.cn/6061-aluminum-sheet.html

Aluminium 6061 Specifikationer

UNS A96061, Aluminium 6061, 6061 Legering, 6061 Aluminiumlegering, AA6061, al6061, Aluminum 6061-T6, AA6061-T6,
6061-T6511, 6061-0, 6061-T4, 6061-T6, 6061-T451, 6061-T651.

Funktioner av 6061 Aluminiumplåt

In terms of corrosion resistance, de 6061 aluminum sheet is the highest in its class of heat-treated aluminum. This makes it suitable for heavy structures and marine environments. The product has a protective film that helps prevent corrosion. For further corrosion resistance, other coatings or anodization can be used.

The conductivity of alloy 6061 is 40% that of copper. It is often used in the electrical field in the form of electrical accessories and connectors.

6061 Alloy aluminum is highly weldable, for example using Tungsten Inert Gas (TIG) or Metal Inert Gas (MIG).

Aluminum Sheet Welding Technology

I allmänhet, the properties near the weld after welding are 6061-0, and the strength loss is about 80%. The material can be heat treated again to restore the -T4 or -T6 temper condition of the entire part.

After welding, the material can naturally age and regain some of its strength. Typical filler materials are 4043 eller 5356. Good machinability in hard T4 and T6 tempered conditions. Machining in the annealed state is particularly difficult.

Tillämpningar av 6061 Aluminiumplåt

6061 Aluminum plate is commonly used in the manufacture of heavy duty structures where good corrosion resistance is required, truck and marine components, the manufacture of aircraft structures such as wings and fuselages, yachtkonstruktion, bicycle frames and components, and automotive parts such as wheel spacers.

6061 Aluminum Sheet For Car Parts

6061 aluminum sheet is widely used in the following industries：

• Gångvägar
• Golv
• Ramps
• Bridge flooring
• Trench and drainage covers
• Mezzanines
• Plattformar
• Stair treads
• Motorboats
• Aircraft structures
• Skeppsbyggnad
• Truck bodies
• Pylons & towers
• Rail coaches
• Pipelines and Welded Assemblies
• Agricultural Applications
• Electrical and Electronic Components
• Möbler
• Storage Tanks
• Kemisk utrustning
• Pneumatic and Hydraulic Cylinder Components

6061-T651 aluminum plate

Vår 6061 plate has a T651 temper, indicating that it has been solution heat treated followed by minimal stretching to reduce stress in the material. The material is then artificially aged to precipitate alloying elements out of the material, resulting in immediate maximum strength.

6061-T651 Aluminum Plate For Mechanical

Aluminiumplåt 6061 T6/T651 is versatile and typically used in aerospace, marin, electronic, decorative, mechanical and structural applications.

6061 Aluminum Sheet Gauge Thickness

6061 aluminum sheet thickness tolerance

Huawei aluminium, one of the largest aluminum product manufacturers in China, we strictly control the product quality, de 6061 aluminum sheet we provide, 6061-t6 aluminum sheet thickness tolerance is strictly controlled within +/- 10%.

Tolerance Control Of 6061 Aluminiumplåt

Compared 6061 alloy with 5052 legering

The chemical composition and production process of 6061 och 5052 aluminum sheets are similar, but there are some differences.

5052 aluminiumplåt och 6061 aluminum plate conform to modern production process standards, so many consumers are also very optimistic about its development trend.

Chemical Composition Comparison Of 5052 & 6061

Aluminiumlegering 5052 tillhör 5000 serie aluminiumplåt. Its main element is magnesium. The magnesium content is between 3-5%, also known as aluminum-magnesium alloy. The main features are low density, high tensile strength and high elongation. The weight of aluminum-magnesium alloy in the same area is lower than that of other series. Därför, it is often used in aviation, such as aircraft fuel tanks.

Aluminum For Tank

De viktigaste legeringselementen i 6061 aluminum alloy are magnesium and silicon. Legering 6061 has medium strength, bra korrosionsbeständighet, good weldability and good oxidation effect. 6061 has excellent processability, bra korrosionsbeständighet, hög seghet, no deformation after processing, easy coloring and film formation, and excellent oxidation effect.

Mechanical Properties Comparison Of 5052 & 6061

Many customers want to know the difference between 6061 t6 and aluminum 5052. 061 aluminum alloy can produce T5, T6, T651 and T6511 tempers. 5052 aluminum alloy is generally H112, H34, H32 and O state. Legering 6061 is generally used in places with high strength, and alloy 5052 is generally used in places with low strength. De 5052 alloy pursues rust resistance, not strength. 5052 aluminiumplåt och 6061 aluminum plate are commonly used aluminum plates, but there are still very obvious differences.