Huawei Aluminum is a large-scale 5052 aluminum foil raw material manufacturer, with 30 years of experience in aluminum foil production and sales.
5052 aluminum alloy is the most widely used alloy in the 5000 series. With magnesium as an auxiliary alloying element, the alloying degree is higher than that of 3003 aluminum, but lower than that of 8011 alloy.
5052 aluminum foil has higher strength than 1 series and 8 series aluminum foil, also known as high-strength aluminum foil, with good corrosion resistance, suitable for packaging materials, honeycomb materials, electronic products and other fields
5052 Aluminium Foil
Huawei Aluminum is a large-scale 5052 aluminum foil raw material manufacturer, with 30 years of experience in aluminum foil production and sales.
The company’s 5052 aluminum foil has stable performance and has many advantages such as clean degreasing, less pinholes, good product shape, no deformation, and good anti-rust effect.
Our products are of excellent quality and can meet the national, American, European, Russian, Japanese and other aluminum product quality standards at the same time, and are widely used in honeycomb materials, door panels, lunch boxes and other fields.
Large aluminium foils in factory
| Typical alloy | 5052 Aluminum Foil | |||||||||
| Material temper | O, H19, H22, H24, H2*, H18, H1*, H3*, F,etc. | |||||||||
| Thickness (mm) | 0.014-0.2 | |||||||||
| Width (mm) | 20-2650 | |||||||||
| Length (mm) | Customize | |||||||||
| Typical product | Lunch box, Food container, Food packaging, etc | |||||||||
| Physical Properties | Metric | English | Comments |
| Density | 2.68 g/cc | 0.0968 lb/in³ | AA; Typical |
| Elements | Mg | Fe | Si | Cr | Cu | Mn | Zn | Others | Al | |
| Content | 2.2-2.8 | 0.4 | 0.25 | 0.15-0.35 | 0.1 | 0.1 | 0.1 | 0.15 | Remain | |
| Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
| 173-303 | 66-221 | 2-19 |
| Electrical Resistivity | 4.99e-006 ohm-cm | 4.99e-006 ohm-cm | AA; Typical at 68°F |
| CTE, linear 68°F | 23.8 µm/m-°C | 13.2 µin/in-°F | AA; Typical; Average over 68-212°F range. |
| CTE, linear 250°C | 25.7 µm/m-°C | 14.3 µin/in-°F | Average over the range 20-300ºC |
| Specific Heat Capacity | 0.88 J/g-°C | 0.21 BTU/lb-°F | Estimated from trends in similar Al alloys. |
| Thermal Conductivity | 138 W/m-K | 960 BTU-in/hr-ft²-°F | AA; Typical at 77°F |
| Melting Point | 607 – 649 °C | 1125 – 1200 °F | AA; Typical range based on typical composition for wrought products 1/4 inch thickness or greater |
| Solidus | 607 °C | 1125 °F | AA; Typical |
| Liquidus | 649 °C | 1200 °F | AA; Typical |
| Annealing Temperature | 343 °C | 650 °F | holding at temperature not required |
| Hot-Working Temperature | 260 – 510 °C | 500 – 950 °F |
aluminium 5052-h19 foil
strength
5052 is a medium and high strength aluminum alloy with low density and higher strength than 1 series and 3 series aluminum alloys
Anti-melt and anti-rust: It has a high degree of anti-melt and anti-rust, it is a food grade aluminum foil
forming. Mg is the main alloying element, so 5052 aluminum foil exhibits better processability, formability and formability.
tensile strength
The tensile strength of 5052 H24 aluminum foil is 230-280Rm/MPa, much higher than that of 3003 container foil (145-195Rm/MP).
5052 aluminum foil strength
Corrosion resistance
5052 aluminum foil also has excellent corrosion resistance, whether it is used in beverages or food.
fatigue strength
Aluminum foil 5052 also has high fatigue strength, machinability, ductility, outstanding surface treatment effect, etc.
Production
During the heating process of 5052, less oxides are formed on the surface of the aluminum material, and the utilization rate of the aluminum ingot is high.
5052-Honeycomb-aluminum-foil
As an aluminum foil factory with many years of experience, our aluminum foil 5052 manufacturing technology is very demanding, and we have formulated strict procedures to ensure the quality and transportation of the product
aluminum foil alloy 5052
1. Cast and rolled to 7mm
2. Cold rolled to 0.25mm
3. Foil rolled to the requirement
1. Can a certificate of origin be provided?
Yes, we can provide CO, FTA, Form A, Form B, Form E, etc. upon your request.
2. How do you guarantee the quality?
We have a complete inspection system from raw materials to finished products, every step must be inspected and signed by our professional team.
3. How can I get your quotation?
Please mention alloy and temper, application, thickness, tensile strength, elongation etc. and we will quote as soon as possible.
4. How about the delivery time?
According to different order requirements, usually about 20-60 days.
5. Can we visit your factory?
Yes, we sincerely welcome you to visit us anytime!
6. May I know your payment terms?
We prefer to pay by T/T and L/C, payment terms: 30% deposit in advance, 70% should be paid before shipment. If you want other terms, please feel free to let us know in your inquiry.
7. Can you provide samples for testing?
Yes, we can provide samples in A4 format or small rolls for you to test, welcome to send your inquiry.
8. Can you make custom designs?
Yes, we can produce models according to customer’s detailed requirements.
9. Can certificates be provided?
Yes, we can provide SGS, REACH, ROHS, MSDS, etc.
aluminium foil big roll
10. What is the packaging?
Our products are packed in wooden cases by sea
11. Can you produce if I only need a small amount?
Dear customer, because the MOQ of aluminum foil raw material is 5 tons.
12. What is your product range?
Our company’s products include aluminum foil, aluminum coil, aluminum plate, aluminum ring, aluminum lattice plate and so on.
13. What are the advantages of your company?
We have more professional technicians than other companies, more competitive prices and the best after-sales service
14. What are your strengths?
1. Respond promptly
2. Provide free sample test
3. Standard Seaworthy Packaging
4. Strict quality control
5. Try the Minimum Order
6061-T6 Aluminum floor plate, commonly known as “diamond plate” or “tread plate”, is an excellent candidate for most processing techniques and both interior and exterior applications.
3105 aluminum coil is a 3000 series aluminum alloy: the main alloying addition is manganese, which is formulated for primary forming into forged products.
As one of the main aluminium circle manufacturers in the Chinese market, our aluminium circle are made with the best raw materials and machinery, the main products include 1000 series, 3000 series, 5000 series and 8000 series, with an output of more than 5000 tons/month
6061 aluminum coil" is an aluminum alloy that is commonly used for applications such as automotive and aerospace components, as well as for construction and industrial products. This article will explore the Properties，Benefits and Applications of 6061 aluminum coil, from its raw material form to the finished product.
Thin aluminum sheet typically refers to a flat piece of aluminum material that has a thickness of less than 6mm (0.24 inches).
Discover primer coated aluminium foil with excellent coating adhesion, moisture resistance, smooth surface quality, and reliable performance for flexible packaging and lamination.
No.52, Dongming Road, Zhengzhou, Henan, China
Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products
Mon – Sat, 8AM – 5PM
Sunday: Closed
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Latest Comments
We need some t111 aluminium plate. We are looking for quarter inch by 4'x8' sheets
Aluminum 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต
سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر
Dear Sales Team, I hope you are doing well. We are looking to source aluminum products from your company and would appreciate receiving your best quotation for the following: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available standard sheet sizes. Kindly quote the price per sheet and the price per metric ton. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available coil widths, standard coil weights, and inner diameter specifications. Kindly quote the price per metric ton. For both sheets and coils, please include: Available alloys (e.g. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (including sea freight), or alternatively provide both FOB China and CIF Jebel Ali Port, UAE prices. If available, please also send: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. We are interested in establishing a long-term business relationship. Our initial purchase volume is expected to be 100+ metric tons, with the potential for larger and recurring orders if your pricing, quality, and service meet our requirements. Thank you for your time. We look forward to receiving your quotation and hope to build a successful long-term partnership. Best regards, Eng.Yousef
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります 又、そのような製品があるようでしたらその重量、価格をおしえていただけますか 現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます 出来ましたらメールでお返事をいただけますか