5052 Aluminum Strip Supplier

Home » Products » Aluminum Strip » 5052 Aluminum Strip Supplier

Looking for a reliable 5052 aluminum strip supplier? Huawei Aluminum offers customized thicknesses, widths, tempers, and coil specifications with strict quality control.

5052 Aluminum Strip Supplier

  • Thickness (mm): 0.20 – 0.50 (Tolerance: ± 5%)
  • Width (mm): 20 – 800 (Tolerance: ± 1.0)
  • Length: C
  • Ingredients: Aluminum Manganese
  • Tempering: full soft (o state) half hard (H24) full hard (h18)

  E-mail   Wtatsapp   Inquiry

Table Of Contents Show

1. Introduction

5052 aluminum strip is a widely used aluminum alloy product valued for its combination of mechanical strength, corrosion resistance, and fabrication flexibility.

As a member of the 5000 series, it uses magnesium as its primary alloying element and belongs to the group of non-heat-treatable aluminum alloys.

Manufacturers can adjust its mechanical properties through cold working and temper control to meet different processing and application requirements.

In industrial production, aluminum strip offers an additional advantage: its narrow and consistent width makes it convenient for continuous processing, stamping, roll forming, and automated manufacturing.

Buyers can specify thickness, width, coil inner diameter, temper, edge condition, and surface finish according to their production requirements.

However, selecting the right material involves more than confirming the 5052 alloy designation.

Temper, dimensional tolerances, surface quality, and mechanical properties all influence processing efficiency and finished-product performance.

A reliable 5052 aluminum strip supplier should therefore provide consistent material quality, accurate slitting, suitable technical documentation, and flexible product specifications.

5052 Aluminum Strip

5052 Aluminum Strip

2. What Is 5052 Aluminum Strip?

2.1 Overview of 5052 Aluminum Alloy

5052 aluminum is a magnesium-based alloy in the 5000 series. Its typical magnesium content ranges from 2.2% to 2.8%, while chromium is added in a controlled amount to support its corrosion resistance and metallurgical performance.

Unlike heat-treatable alloys such as 6061, 5052 does not rely on solution heat treatment and artificial aging to achieve its strength.

Instead, manufacturers primarily adjust its mechanical properties through strain hardening, followed by stabilization where required.

This alloy offers a useful balance of strength, ductility, and corrosion resistance.

It performs particularly well in atmospheric and marine environments, although the actual corrosion performance depends on exposure conditions, surface condition, and component design.

2.2 What Is Aluminum Strip?

Aluminum strip refers to a narrow, flat-rolled aluminum product supplied in coil form or as cut lengths.

Manufacturers commonly produce it by slitting wider aluminum coils into narrower widths according to customer specifications.

Although aluminum sheet, coil, and strip share similar rolling processes, they differ mainly in product dimensions and delivery formats.

Product Form Main Characteristics Typical Supply Form
Aluminum Sheet Flat aluminum product with specified thickness and width Individual sheets
Aluminum Coil Continuous rolled aluminum material in coil form Large coils
Aluminum Strip Narrow-width aluminum material, usually slit from wider coils Slit coils or cut strips

3. 5052 Aluminum Strip Specifications

The specifications of 5052 aluminum strip determine whether the material can meet a customer’s manufacturing and end-use requirements.

Buyers should evaluate alloy designation, temper, thickness, width, coil dimensions, edge quality, and surface finish before placing an order.

3.1 Core Specifications of 5052 Aluminum Strip

Parameter Specifications / Typical Range
Product Name 5052 Aluminum Strip
Alloy Designation 5052 / AA5052
Alloy Series 5000 Series
Alloy Type Aluminum-Magnesium Alloy
Main Alloying Element Magnesium (Mg)
Product Form Aluminum Strip / Slit Coil
Common Tempers O, H12, H14, H16, H18, H22, H24, H32, H34, H36, H38
Thickness Range 0.15–10.0 mm, depending on temper and supplier
Common Thickness 0.5–6.0 mm
Width Range 20–2,650 mm, depending on production capability
Common Standard Widths 1,000 / 1,250 / 1,219 / 1,500 / 1,524 mm
Narrow Strip Width Customized, commonly produced by precision slitting
Coil Inner Diameter (ID) Commonly 305 / 405 / 406 / 505 / 508 / 610 mm, subject to availability
Coil Outer Diameter (OD) Customized according to coil weight and handling requirements
Coil Weight Customized according to width, thickness, and customer requirements
Edge Type Mill Edge / Slit Edge
Surface Finish Mill Finish; other finishes subject to agreement
Surface Protection Bare Surface / PE or PVC Film, if specified
Tensile Strength Approximately 170–305 MPa, depending on temper and thickness
Yield Strength Approximately 65–255 MPa, depending on temper and thickness
Elongation Approximately 3–25%, depending on temper and thickness
Density Approximately 2.68 g/cm³
Elastic Modulus Approximately 70.3 GPa
Corrosion Resistance Good atmospheric and marine corrosion resistance
Formability Good, particularly in O temper
Weldability Good with suitable welding procedures
Applicable Standards ASTM B209, EN 485 Series, EN 573-3, GB/T 3880

4. Chemical Composition of 5052 Aluminum

The chemical composition of 5052 aluminum determines many of its important characteristics, including strength, corrosion resistance, formability, and welding performance.

5052 Aluminum Strip With Bluefilm

5052 Aluminum Strip With Bluefilm

4.1 Chemical Composition Table

The following table presents the commonly specified chemical composition limits for 5052 aluminum.

Chemical Composition of 5052 Aluminum (wt.%)

Element Symbol Composition
Aluminum Al Remainder
Magnesium Mg 2.2–2.8
Chromium Cr 0.15–0.35
Silicon Si ≤0.25
Iron Fe ≤0.40
Copper Cu ≤0.10
Manganese Mn ≤0.10
Zinc Zn ≤0.10
Others, Each — ≤0.05
Others, Total — ≤0.15

*Note: Values are representative composition limits commonly associated with 5052 aluminum.

The applicable standard and its specified edition should govern contractual acceptance.

5. Mechanical and Physical Properties of 5052 Aluminum Strip

5.1 Mechanical Properties of 5052 Aluminum Strip by Temper

The mechanical properties of 5052 aluminum strip change significantly with its temper.

Annealed O temper offers high ductility and excellent formability, while strain-hardened H tempers provide higher strength and hardness.

The following table provides representative mechanical property ranges for commonly used tempers.

Mechanical Properties of 5052 Aluminum by Temper

Temper Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) Brinell Hardness (HB)
O 170–215 ≥65 14–20 Approx. 47
H32 215–265 ≥160 4–10 Approx. 60
H34 235–285 ≥180 3–8 Approx. 68
H36 255–305 ≥200 2–4 Approx. 73
H38 ≥270 ≥220 2–4 Approx. 77

Reference values compiled from published 5052 alloy datasheets. Actual specified limits and elongation depend on thickness, product form, test method, and applicable standard.

Hardness values are typical rather than universal acceptance requirements.

Several factors should guide temper selection:

  • O Temper: Its low strength and high ductility make it suitable for deep drawing, complex bending, and components requiring substantial deformation.
  • H32 Temper: Provides a practical balance between strength and formability. It is widely used in general sheet-metal fabrication, transportation components, and equipment housings.
  • H34 Temper: Offers higher strength than H32 while retaining useful formability for moderately demanding applications.
  • H36 and H38 Tempers: Provide higher strength and hardness but lower elongation. They are more appropriate for components that require rigidity and undergo limited forming.

For narrow aluminum strips used in continuous stamping or roll forming, temper consistency is particularly important.

Variations in hardness or elongation can affect feeding stability, springback, dimensional accuracy, and forming quality.

5.2 Physical Properties of 5052 Aluminum Strip

5052 aluminum combines low density with useful thermal and electrical properties.

Although it does not offer the same electrical conductivity as commercially pure aluminum, it provides a good balance of physical and mechanical characteristics for industrial applications.

Physical Properties of 5052 Aluminum

Property Typical Value Unit
Density 2.68 g/cm³
Elastic Modulus 70.3 GPa
Thermal Conductivity 138 W/(m·K)
Electrical Conductivity Approx. 35 % IACS
Specific Heat Capacity Approx. 900 J/(kg·K)
Thermal Expansion Coefficient Approx. 23.8 ×10⁻⁶/K
Melting Range 607–649 °C
Poisson’s Ratio 0.33 —

These properties have several practical implications:

  • Low density: At approximately 2.68 g/cm³, 5052 aluminum helps reduce component weight compared with steel.
  • Thermal performance: Its thermal conductivity supports applications involving heat transfer, equipment housings, and heat exchanger components.
  • Electrical performance: Its conductivity is suitable for selected electrical components, although pure aluminum and copper are generally preferred when maximum conductivity is the priority.
  • Thermal stability: Its thermal expansion should be considered when designing components exposed to temperature changes.

6. Key Advantages of 5052 Aluminum Strip

5052 aluminum strip combines mechanical strength, corrosion resistance, and fabrication flexibility.

These characteristics make it a practical choice for manufacturers that need lightweight materials with reliable performance in different operating environments.

6.1 Excellent Corrosion Resistance

5052 aluminum provides good resistance to atmospheric corrosion, moisture, and many marine environments.

Its natural oxide film protects the underlying metal, while its magnesium-based composition supports corrosion performance.

This advantage makes it suitable for marine fittings, outdoor equipment, vehicle components, and industrial enclosures.

6.2 High Strength-to-Weight Ratio

With a density of approximately 2.68 g/cm³, 5052 aluminum offers useful mechanical strength without adding excessive weight.

Different tempers allow manufacturers to adjust the balance between strength and ductility.

This combination helps reduce component weight while maintaining the required mechanical performance in transportation and industrial applications.

6.3 Good Formability and Bendability

5052 aluminum strip supports bending, stamping, roll forming, and other common fabrication processes.

O temper provides high ductility for complex forming, while H32 and H34 offer greater strength for moderately formed components.

Choosing the appropriate temper helps manufacturers reduce forming defects and maintain dimensional accuracy.

6.4 Reliable Welding Performance

The alloy supports common aluminum welding methods, including TIG and MIG.

Its weldability makes it useful for fabricated tanks, equipment housings, marine components, and other assembled structures.

Proper filler metal selection and welding procedures help maintain joint quality and account for heat-affected-zone softening.

6.5 Good Fatigue Resistance

5052 aluminum offers good resistance to repeated loading compared with many general-purpose aluminum alloys.

This characteristic benefits components exposed to vibration and cyclic mechanical stress, including vehicle panels and industrial equipment parts.

6.6 Versatile Surface Finishing

5052 aluminum strip can undergo various surface treatments, including anodizing, painting, and coating, depending on the application.

These treatments can improve appearance, surface protection, and resistance to environmental exposure.

For decorative anodizing, however, buyers should confirm the required surface grade and appearance criteria with the supplier and finishing processor.

Typical-Applications-of-5052-Aluminum-Strip

Typical-Applications-of-5052-Aluminum-Strip

7. Typical Applications of 5052 Aluminum Strip

The combination of strength, corrosion resistance, low density, and fabrication flexibility makes 5052 aluminum strip suitable for many industrial and commercial products.

Its narrow-width coil form also supports continuous stamping, roll forming, and automated component manufacturing.

7.1 Marine and Shipbuilding

5052 aluminum performs well in many marine atmospheric environments because of its corrosion resistance and relatively high strength.

Manufacturers use it for selected marine components that require lightweight construction and reliable environmental performance.

Typical applications include:

  • Boat fittings and fabricated components.
  • Marine equipment covers and housings.
  • Interior panels and trim components.
  • Protective enclosures and brackets.

7.2 Automotive and Transportation

The low density and good formability of 5052 aluminum help manufacturers reduce vehicle weight while maintaining useful mechanical performance.

Its strip form is particularly convenient for continuous fabrication and precision component production.

Typical applications include:

  • Vehicle body panels and interior components.
  • Truck and trailer panels.
  • Fuel tank components, where permitted by the design.
  • Protective covers and brackets.
  • Transportation equipment housings.

7.3 Electronics and Electrical Equipment

5052 aluminum strip offers a practical combination of strength, lightweight construction, and corrosion resistance for electronic and electrical equipment.

Its formability allows manufacturers to produce enclosures and precision sheet-metal components.

Typical applications include:

  • Electrical cabinet components.
  • Electronic equipment housings.
  • Control panel covers.
  • Instrument enclosures.
  • Protective shielding and structural parts.

7.4 Industrial Equipment and Machinery

Industrial equipment often requires materials that can withstand mechanical handling, environmental exposure, and repeated operation.

5052 aluminum strip meets many of these requirements through its strength and fabrication characteristics.

Typical applications include:

  • Machine covers and protective panels.
  • Equipment housings.
  • Fabricated brackets and mounting components.
  • Ventilation equipment parts.
  • Industrial enclosures and guards.

7.5 Pressure Vessels and Storage Equipment

5052 aluminum is used in selected tanks, containers, and fabricated storage equipment because of its corrosion resistance, weldability, and formability.

Typical applications include:

  • Fuel and liquid storage tanks.
  • Selected chemical storage containers.
  • Transport tank components.
  • Welded industrial vessels.

7.6 Architectural and Decorative Components

5052 aluminum strip can support architectural fabrication where strength, corrosion resistance, and surface finishing are important.

Typical applications include:

  • Building trim and decorative strips.
  • Exterior equipment covers.
  • Fabricated architectural components.
  • Anodized or coated panels and profiles.

8. 5052 Aluminum Strip vs. Other Aluminum Alloys

Selecting the right aluminum alloy requires balancing strength, corrosion resistance, formability, surface treatment, and cost.

Although several aluminum alloys can be supplied in strip form, their compositions and mechanical characteristics lead to different application advantages.

8.1 Comparison of Key Characteristics

The following table compares 5052 with four commonly considered aluminum alloys.

Comparison 5052 5005 5083 3003 6061
Alloy Series 5000 5000 5000 3000 6000
Main Alloying Elements Mg, Cr Mg Mg, Mn Mn Mg, Si
Heat Treatability Non-heat-treatable Non-heat-treatable Non-heat-treatable Non-heat-treatable Heat-treatable
Strength Level Medium to high Medium High Low to medium High in T6
Corrosion Resistance Excellent Good to excellent Excellent Good Good
Formability Good Good Moderate Excellent Moderate
Weldability Good Good Good Good Good, with strength considerations
Anodizing Performance Good Very good for decorative applications Good for protective finishes Generally less preferred for decorative anodizing Good, but appearance may vary
Typical Applications Marine parts, enclosures, transportation Architectural decoration, anodized components Marine structures, heavy-duty fabrication General fabrication, HVAC, cookware Structural components, machinery

Note: These are qualitative comparisons. Actual performance depends on temper, thickness, product form, processing, and environmental conditions.

Huawei Packaged 5052 Aluminum Strip

Huawei Packaged 5052 Aluminum Strip

9. China High-Quality 5052 Aluminum Strip Supplier – Huawei Aluminum

Choosing a reliable 5052 aluminum strip supplier helps ensure consistent material quality, accurate dimensions, and stable delivery.

Buyers should consider manufacturing experience, quality control, customization capabilities, and export services.

Henan Huawei Aluminum Co., Ltd. is an experienced aluminum manufacturer and supplier established in 2001.

With over 20 years of industry experience, the company supplies aluminum sheets, coils, strips, foils, circles, and embossed products to customers in more than 70 countries.

9.1 Why Choose Huawei Aluminum?

  • Customized Specifications: Supports different alloy tempers, thicknesses, widths, and coil dimensions according to order requirements.
  • Processing Capabilities: Offers aluminum processing services such as slitting, color coating, embossing, anodizing, and mirror finishing for applicable products.
  • Quality Control: Focuses on chemical composition, dimensional accuracy, mechanical properties, and surface quality.
  • Export Experience: More than 20 years of aluminum industry experience and international business experience across 70+ countries.

Huawei Aluminum can provide 5052 aluminum strip solutions for marine components, transportation equipment, electrical enclosures, and general industrial fabrication.

Contact Huawei Aluminum with your required alloy temper, thickness, width, quantity, and application details to receive technical support and a free quotation.

10. Quality Control and Inspection Standards

For strip, quality control must confirm two things: that the material is the alloy and temper it claims to be, and that every coil will run properly on your line.

10.1 Raw material and in-process control

Stage Control Points
Incoming material Ingot purity and magnesium source checked and recorded by batch
Melting Spectrometer analysis, magnesium and chromium adjusted before casting, oxide control
Casting Structure and surface condition
Rolling Thickness gauge, flatness, surface condition
Annealing and stabilizing Temperature and time records, hardness consistency
Slitting Width, edge condition, burr height, camber
Packing Protection, labeling, coil identification

10.2 Finished strip tests

Test Purpose Typical Method
Chemical composition Confirm 5052 limits, especially Mg and Cr Optical emission spectrometry
Tensile, yield, elongation Verify the ordered temper Tensile testing
Hardness Check uniformity within and between coils Hardness tester
Bend test Confirm formability for the temper Bend test to agreed radius
Thickness Confirm gauge and uniformity Micrometer or thickness gauge
Width and camber Ensure feeding and forming accuracy Calipers, straightedge methods
Flatness Prevent stamping and press-brake issues Flatness gauge
Surface appearance Detect scratches, stains, roll marks, oil Visual inspection

10.3 Standards and compliance topics

Common references include:

  • Aluminum standards: ASTM B209, EN 485, EN 573, GB/T 3880
  • Quality management: ISO 9001, only if actually held
  • Environmental and chemical rules: RoHS and REACH statements, where applicable and supportable
  • Marine and pressure applications: classification society approvals (such as CCS, DNV, ABS, or LR) or pressure vessel material approvals, only if genuinely held

Important: state only the standards and certificates your company actually holds, and be ready to provide copies. For marine and pressure uses, an unsupported claim is a serious risk.

11. Conclusion

5052 aluminum strip is a versatile Al-Mg alloy product known for its corrosion resistance, moderate-to-high strength, good formability, and weldability.

These properties make it suitable for marine components, transportation equipment, electrical enclosures, industrial fabrication, and architectural applications.

Selecting the right temper and dimensions is essential for achieving the required balance between strength and formability.

Buyers should also pay attention to chemical composition, mechanical properties, dimensional tolerances, surface quality, and coil packaging.

Working with an experienced supplier such as Henan Huawei Aluminum Co., Ltd. can help buyers source customized 5052 aluminum strip and coordinate technical requirements for different applications.

FAQs

1. What is 5052 aluminum strip?

5052 aluminum strip is a 5xxx-series Al-Mg alloy product known for its good corrosion resistance, strength, formability, and weldability.

2. Is 5052 aluminum strip corrosion-resistant?

Yes. It offers good resistance to atmospheric and marine environments, making it suitable for many outdoor and marine applications.

3. What tempers are available?

Common tempers include O, H32, H34, H36, and H38. O temper provides better formability, while H tempers offer higher strength.

4. Can 5052 aluminum strip be bent and welded?

Yes. It has good bending and welding performance. The appropriate temper, bend radius, and welding method should be selected according to the application.

5. What is the difference between 5052 and 5083 aluminum?

5083 generally offers higher strength for demanding marine and structural applications, while 5052 provides a good balance of strength, formability, and corrosion resistance.

6. What sizes are available?

Thickness, width, and coil dimensions can be customized according to supplier capabilities and order requirements.

7. How can I get a quotation for 5052 aluminum strip?

Provide the required temper, thickness, width, quantity, coil specifications, and application details. The supplier can then evaluate your requirements and provide a quotation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Comments

  • profalu ag Said:
    Bitten um Angebot für: En AW 1050 weich H 111 (3.0255 PL) . reflektal 20% / elektrolytisch geglänzt, farblos eloxiert 8000 kgs 1.5 x 1000 x 2000 Lieferung: DAP-CH-Zurich Profalu AG Schlössligasse 1 / CH-7076 Parpan
  • Gert Fris Said:
    Hallo, Voor een kunstproductie zoek ik wat dikkere aluminiumfolie die niet snel scheurt, eventueel gekleurd. Minimale breedte ongeveer 30 cm. Is het mogelijk om wat monsters te zien in verschillende diktes? Niet dikker dan 1 mm. Als dat kan zou u mij geweldig helpen! Graag hoor ik van u. Gert Fris, beeldend kunstenaar te Enschede
  • Bob Said:
    We need some t111 aluminium plate. We are looking for quarter inch by 4'x8' sheets
  • นฤพนธ์ Said:
    Aluminum 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต
  • Alireza Mokhtaryan Said:
    سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر
  • Hot Products

    This is our best selling products

    LDPE composite aluminum foil

    LDPE Composite Aluminum Foil

    Discover LDPE composite aluminum foil, designed for superior moisture resistance, thermal insulation, and versatile applications in packaging, construction, and more.

    thin aluminum sheet

    Thin aluminum sheet

    Thin aluminum sheet typically refers to a flat piece of aluminum material that has a thickness of less than 6mm (0.24 inches).

    Pvdf Coated Aluminum Coil

    Pvdf Coated Aluminum Coil

    Pvdf Coated Aluminum Coil is one type of Color coated aluminum coil, Color coated aluminum coil can be divided into polyester (PE) coated aluminum coil, fluorocarbon (PVDF) coated aluminum coil and epoxy roller coated aluminum coil.

    Electronic aluminum foil

    Electronic Aluminum Foil

    Electronic aluminum foil is a kind of aluminum foil processed by a series of rolling, cleaning and cutting processes of high-purity aluminum ingots. It is a key raw material for the production of aluminum electrolytic capacitors.

    8011 Grade Cookware Aluminum Circles

    8011 Grade Cookware Aluminum Circles

    High-quality 8011 grade cookware aluminum circles offer excellent formability, stable performance, and dependable results for kitchenware production.

    thick aluminum palte

    Thick aluminum plate sheet

    In general, aluminum sheet that is thicker than 6mm (0.25 inches) is considered to be thick.

    Our Office

    No.52, Dongming Road, Zhengzhou, Henan, China

    Call Us

    +8618137782032

    HWALU

    Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products

    Opening Hours:

    Mon – Sat, 8AM – 5PM

    Sunday: Closed

    Get In Touch

    No.52, Dongming Road, Zhengzhou, Henan, China

    +8618137782032

    [email protected]

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    © Copyright © 2023 Henan Huawei Aluminium Co., Ltd

    Call Us

    Email Us

    Whatsapp

    Inquiry