3004 Aluminum Sheet

Size: 1000x2000mm,1500x3000mm,4×8′,5×10′, or customized size.
Thickness: 0.1-500mm customized.
Temper: O, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112.

E-mail Inquiry

Table Of Contents Show

Introduction of 3004 Aluminum Sheet

Aluminum 3004 is a medium-strength aluminum alloy with manganese and magnesium as the main alloying elements. Its strength is higher than , but the ductility is lower.

3004 Aluminum Sheet Describtion

3004 aluminum/aluminum alloy has high corrosion resistance. When they are exposed to high temperatures, their strength decreases. However, their strength can increase at sub-zero temperatures.

Other Designations of 3004 Aluminum Alloy

ASTM B209 : Standard Specification for Aluminium and Aluminium-Alloy Sheet and Plate
ASTM B221 : Standard Specification for Aluminium and Aluminium-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B547 : Standard Specification for Aluminium and Aluminium-Alloy Formed and Arc-Welded Round Tube
ASTM B313
ASTM B548
ISO 6361 : Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates
SAE J454
UNS A93004

Chemical Composition of 3004 Aluminium Sheet
Elements	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others	Al
Content (max)	0.30	0.70	0.25	1.0-1.5	0.8-1.3	–	0.25	0.23	0.15	95.6-98.2

Table source：

Physical Properties of 3004 Aluminum Sheet

3004 aluminum plate also has good formability, dissolution resistance, corrosion resistance and other characteristics. Often used to machine parts that require good formability, high corrosion resistance, good weldability, or both.

Tensile strength215 MPa31183 psi

Density/Melting Point & Strength Of 3004 Aluminum
Properties	Metric	Imperial
Density	2.6-2.8 g/cm3	0.0939- 0.101 lb/in³
Melting point	633°C	1170°F
Yield strength	170 MPa	24656 psi
Shear strength	115 MPa	16680 psi
Fatigue strength	105 MPa	15229 psi
Elastic modulus	70-80 GPa	10153-11603 ksi
Poisson’s ratio	0.33	0.33
Elongation	10%	10%
Hardness	52	52

3004 Aluminum Sheet With Sydney paper

The Features of 3004 Aluminium Sheet

3004 aluminum alloy is an alloy in the aluminum-manganese series (3000 or 3xxx series). It is similar to Alloy 3003 with about 1% magnesium added. It can be cold worked (but heat treated, unlike other types of aluminum alloys) to produce a temper with higher strength but lower ductility. Like most other aluminum-manganese alloys, 3003 is a general-purpose alloy with moderate strength, good machinability, and good corrosion resistance.

1. High plasticity. 3004 aluminum plate has high plasticity, good semi-cold work hardening plasticity and low cold work hardening plasticity in the annealed state.
2. Well done. It can adapt to the highest speed that most machine tools can reach, and can be used for milling, boring, planing and other mechanical processing. In addition, 3004 aluminum plate has good weldability, but poor machinability.
3. The strength is slightly higher. The addition of alloy Mn, while maintaining the excellent processing performance and corrosion resistance of pure aluminum, the strength of 3004 aluminum plate is slightly improved, which is higher than that of 3003 aluminum plate and 10% higher than that of 1100.
4. Good anodization. After anodizing, the surface of 3004 aluminum plate has enhanced corrosion resistance and can show colorful colors.

Application of 3004 aluminum plate

3004 aluminum sheet is often used in the manufacture of tanks and lightweight components. It can also be used for TV LCD backplanes, storage tanks, curtain walls, heat sinks, billboards, etc.

3004 Aluminum Sheet Application

The main uses of 3004 aluminum plate: various lighting parts, shutter materials, wide curtain wall panels, color-coated aluminum substrates. It can also be used in processing and storage equipment for chemical products, sheet metal processing, some construction tools, etc.

3004 Aluminum Sheet Packaging and Shipping Details:

1) Insert sheets between each sheet. (Cold rolled sheet is optional).
2) The board/roll is placed on an iron or wooden pallet, wrapped with waterproof kraft paper, and fixed with iron tape.
3) Port: Qingdao Port or other major domestic ports.
4) Container: 20 feet GP: 5898mm (length) x 2352mm (width) x 2393mm (height), loading 18~25 tons.
40 feet GP: 12032mm (length) x 2352mm (width) x 2393mm (height), loading 20~28 tons.
5) Delivery time: 25 to 60 days after order confirmed.

Packaging and Shipping

Latest Comments

Bob Said:
We need some t111 aluminium plate. We are looking for quarter inch by 4'x8' sheets

นฤพนธ์ Said:
Aluminum 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต

Alireza Mokhtaryan Said:
سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر

yousef Abuatwan Said:
Dear Sales Team, I hope you are doing well. We are looking to source aluminum products from your company and would appreciate receiving your best quotation for the following: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available standard sheet sizes. Kindly quote the price per sheet and the price per metric ton. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available coil widths, standard coil weights, and inner diameter specifications. Kindly quote the price per metric ton. For both sheets and coils, please include: Available alloys (e.g. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (including sea freight), or alternatively provide both FOB China and CIF Jebel Ali Port, UAE prices. If available, please also send: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. We are interested in establishing a long-term business relationship. Our initial purchase volume is expected to be 100+ metric tons, with the potential for larger and recurring orders if your pricing, quality, and service meet our requirements. Thank you for your time. We look forward to receiving your quotation and hope to build a successful long-term partnership. Best regards, Eng.Yousef

快速　竜 Said:
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります又、そのような製品があるようでしたらその重量、価格をおしえていただけますか現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます出来ましたらメールでお返事をいただけますか