Know more Properties and Uses about 6061 t6 aluminum

Home » Blog » Know more Properties and Uses about 6061 t6 aluminum

6061 aluminum is a heat-treatable aluminum alloy that is very useful in the construction industry and automotive manufacturing due to its excellent corrosion resistance and strength-to-weight ratio.

Know more Properties and Uses about 6061 t6 aluminum

6061 aluminum, originally known as “Alloy 61s”, was one of the first to be developed (in 1935), and is one of the most commonly available heat-treatable aluminum alloys for commercial use.

6061 T6 Aluminum

6061 T6 Aluminum

6061 aluminum is a heat-treatable aluminum alloy that is very useful in the construction industry and automotive manufacturing due to its excellent corrosion resistance and strength-to-weight ratio.

Features of 6061-T6 aluminum

6061-T6 aluminum is renowned for its exceptional structural strength and toughness, imparting unrivaled resilience to various applications. Notably, it boasts a commendable surface finish, making it visually appealing and aesthetically pleasing. Moreover, its remarkable resistance to corrosion from both atmospheric conditions and the relentless onslaught of sea water amplifies its allure.

Machinability is an attribute that sets 6061-T6 aluminum apart from its counterparts. The ease with which it can be shaped, milled, and manipulated to meet specific requirements is a testament to its versatile nature. This alloy’s propensity for welding and joining surpasses that of most other aluminum alloys, whose chemical composition and inferior conductivity often pose arduous challenges in the welding process.

Though it is worth noting that welding 6061 aluminum alloys might entail a modest sacrifice in terms of strength, fear not, for there exists a solution. By subjecting the welded materials to re-heat treatment and artificial aging procedures, their strength can be effectively revitalized. This restorative process stands as a testament to the alloy’s superiority and further solidifies its status as an esteemed choice among discerning users.

Chemical Composition of 6061 Aluminum

Element Minimum % Maximum %
Magnesium 0.8 1.2
Silicon 0.4 0.8
Iron No Min 0.7
Copper 0.15 0.4
Manganese No Min 0.15
Chromium 0.04 0.35
Zinc No Min 0.25
Titanium No Min 0.15
Other Elements No Min 0.05 each0.15 in total

6061 Aluminum Properties

Characteristic Appraisal
Strength Medium to High
Corrosion Resistance Good
Weldability & Brazability Good
Workability Good
Machinability Good

6061 aluminum T4 VS T6

Property 6061-T4 6061-T6
Density 2.70 g/cc | 0.0975 lb/in³ 2.70 g/cc | 0.0975 lb/in³
Property 6061-T4 6061-T6
Tensile Strength 241 MPa | 35000 psi 310 MPa | 45000 psi
Yield Strength 145 MPa | 21000 psi 276 MPa | 40000 psi
Modulus of Elasticity 68.9 GPa | 10000 ksi 68.9 GPa | 10000 ksi
Property 6061-T4 6061-T6
Coefficient of Thermal Expansion @ 20.0 – 100 °C Temp 23.6 µm/m-°C  | 13.1 µin/in-°F 23.6 µm/m-°C | 13.1 µin/in-°F
Thermal Conductivity 154 W/m-K | 1070 BTU-in/hr-ft²-°F 167 W/m-K | 1160 BTU-in/hr-ft²-°F

Leave a Reply

Your email address will not be published. Required fields are marked *

Hot Products

This is our best selling products

1100 Aluminum Foil Roll Manufacturer

1100 aluminum foil

Compared with other alloy foils of series 1, such as 1060 and 1070 aluminum foils, the content of (Fe+Si) in 1100 aluminum foil is higher than both, and the content of Fe is the key factor to improve the strength and toughness

6082 Aluminium Strip

6082 Aluminium Strip

6082 aluminium strip can usually be heat treated for higher strength, but relatively low ductility.6082 aluminum alloy is one of the alloy models of...

3105 Aluminum Coil

3105 Aluminum Coil

3105 aluminum coil is a 3000 series aluminum alloy: the main alloying addition is manganese, which is formulated for primary forming into forged products.

5005 Aluminum Sheet

5005 aluminum sheet

5005 aluminum sheet is a medium-strength aluminum alloy plate, which can reach medium and high strength by cold working, and it has good formability

5052 Aluminum Sheet Show

5052 aluminum sheet

5052 aluminum sheet is part of the 5000 series of aluminum. The grades in this series are alloyed with magnesium (2.5%) and have medium to high strength properties.

Thin Aluminum Sheet

Thin aluminum sheet

Thin aluminum sheet typically refers to a flat piece of aluminum material that has a thickness of less than 6mm (0.24 inches).

Our Office

No.52, Dongming Road, Zhengzhou, Henan, China

Email Us

sales@hw-alu.com

HWALU

Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products

Opening Hours:

Mon – Sat, 8AM – 5PM

Sunday: Closed

Get In Touch

No.52, Dongming Road, Zhengzhou, Henan, China

+86 188 3893 9163

sales@hw-alu.com

Leave a Reply

Your email address will not be published. Required fields are marked *

© Copyright © Henan Huawei Aluminium Co., Ltd

Call Us

Email Us

Whatsapp

Inquiry