3004 Aluminium Circle

Alloy: 3004
Temper: O, H12, H14, H16, H18, H19, H32, H34, H36, H38, H112
Thickness: 0.4mm-10.0mm customized.
Delivery Terms: FOB, CFR, CIF
Quality of material: Totally free from defects like white rust, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set.

E-mail Inquiry

Table Of Contents Show

What is 3004 Aluminium Circle

3004 aluminium circle ,also named 3004 aluminium disc,3004 aluminium disk, it is made by stamping 3004 aluminium coils.

Aluminium circles are widely used in electronics, daily chemicals, medicine, culture, education and auto parts.

Electrical appliances, insulation, machinery manufacturing, automobiles, aerospace, military industry, molds, construction, printing and other industries.

Kitchenware supplies such as non-stick pans, pressure cookers, etc. and hardware supplies such as lampshades, water heater casings, etc. are among the most widely used deep-processed products of aluminium alloy plates and strips.

3004 Aluminium Circle

What is 3004 aluminium

3004 aluminium is a 3000-series aluminium alloy: the main alloying addition is manganese, and it is formulated for primary forming into wrought products.

3004 is the aluminium Association (AA) designation for this material.

In European standards, it will be given as EN AW-3004. AlMn1Mg1 is the EN chemical designation. A93004 is the UNS number.

Additionally, the AFNOR (French) designation is A-M1G.

Chemical CompositIon of 3004 Aluminium Circle

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others:Each	Others:Total	Al:Min.
3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	–	0.1	–	0.05	0.15	remainder

Data Sources: https://aludepot.com/product/3004-aluminum-sheet/#Chemical_Composition_Of_3004_Aluminum_Sheet_Plate_Network_Data1

Alternate designations include 3.0526 and A93004

Mechenical Property 3004 Aluminium Circle

Alloy	Temper	Thickness(mm)	Tensile Strength(Mpa)	The Yield Strength(Mpa)	elongation(%)	hardness(HV)
3004/3104	0	> 0.2-0.5	155-200	≥ 60	≥ 13	49-62
		> 0.5-1.0			≥ 16
		> 1.0-4.0			≥ 20
	H22	> 0.2-0.5	190-240	≥ 145	≥ 10	60-84
		> 0.5-1.0			≥ 12
		> 1.0-4.0			≥ 14
	H24	> 0.2-0.5	220-265	≥ 170	≥ 8	68-100
		> 0.5-1.0			≥ 10
		> 1.0-4.0			≥ 12
	H26	> 0.2-0.5	240-285	≥ 190	≥ 3	72-110
		> 0.5-1.0			≥ 4
		> 1.0-4.0			≥ 6
	H18	> 0.2-0.5	≥ 260	≥ 230	≥ 2	85-120
		> 0.5-1.0			≥ 2
		> 1.0-4.0			≥ 3

Huawei 3004 aluminium circle specifications

Alloy: 3004

Tempers: O, H12, H14, H16, H18, H19, H32, H34, H36, H38, H112

Coating type: blue film, electrostatic blue film, transparent film, black and white film, laser film, paper clip, stamping film, stretch film

Process Hot rolled &Cold rolled

Thickness: 0.4mm-10.0mm

Diameter: 60mm-1200mm

Package: Export wooden pallents, craft paper, anti-blushing agent.

Quality of material: Totally free from defects like white rust, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set.

Aluminium Circle Depot

Diameter List

≧20	≧140	≧170	≧200	≧250	≧300	≧400	≧500	≧600	≧700	≧800
20	140	170	200	250	300	400	500	600	700	800
25	141	172	203	252	305	405	505	610	705	810
93	142	173	205	254	310	410	510	615	710	838
100	143	175	210	255	312	420	515	619	720	890
105	144	176	211	258	315	425	520	630	730	902
109	145	177	212	260	320	430	525	635	740	945
110	147	178	215	267	325	435	530	645	760	960
112	149	180	216	268	330	440	540	650	770	1000
115	150	181	217	270	335	445	545	655	780	1150
118	153	182	218	272	340	450	550	665		1200
120	154	183	220	274	345	455	560	670
121	155	184	221	275	350	460	565	680
122	157	185	222	277	355	465	570	690
123	158	188	225	278	360	470	575
124	160	190	226	280	364	475	580
127	161	192	230	282	368	480	585
128	162	193	233	285	370	485
129	163	195	235	290	375	490
130	164	198	237	292	380	495
132	165		238	293	385
133	166		240	295	390
134	167		242		395
135	168		245
136	169		249
137
138
139

3004 Aluminium Circle Features:

1.Alloy 3003 3004 aluminium circle, deep drawing quality, good spinning quality, excellent forming and anodizing, no four ears;
2.Excellent reflectivity, good for Polishing;
3.Good anodized quality, suitable for hard anodizing and enameling;
4.Clean surface and smooth edge, hot rolled quality, fine grains and after deep drawing no looper lines;
5.Excellent pearl color anodizing.

3004 Alloy Aluminium Circle Application

Cookware: 3004 aluminium circles are often used to make the bottoms or lids of cookware such as pots, pans, and woks due to their excellent heat conductivity and resistance to corrosion.

The circles can be further processed into the desired shapes and sizes for these applications.

3004 aluminium circle application

Lampshades

Signage

Utensils

Pressure Vessels

Automotive Parts

application

Containers and Packaging

General Fabrication

Cookware used 3004 aluminium circle

Huawei 3004 aluminium circle

Our high quality aluminium circle sheet can be used in the production of a variety of cookware products,such as for deep drawing cooking pot、spinning quality for kitchen utensils、for aluminium Non stick cookware、for cookware bottom、for non-stick cookware、for non-stick pan、for non-stick pan、for kitchenware etc.

3004 Aluminium Circle Packaging

Latest Comments

Bob Said:
We need some t111 aluminium plate. We are looking for quarter inch by 4'x8' sheets

นฤพนธ์ Said:
Aluminum 5754 H111 หนา 8 mm กว้าง x ยาว : 4 x 6 ฟุต

Alireza Mokhtaryan Said:
سلام بسیار عالی ،،من از ایران تماس میگیرم فویل طلا ۱۲میکرون عرض ۶۱سانت نیاز داریم حدودا هرماه ۳۵هزار متر

yousef Abuatwan Said:
Dear Sales Team, I hope you are doing well. We are looking to source aluminum products from your company and would appreciate receiving your best quotation for the following: Aluminum Sheets Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available standard sheet sizes. Kindly quote the price per sheet and the price per metric ton. Aluminum Coils Thickness: 2 mm, 3 mm, 4 mm, and 5 mm Please provide your available coil widths, standard coil weights, and inner diameter specifications. Kindly quote the price per metric ton. For both sheets and coils, please include: Available alloys (e.g. 1050, 3003, 5052) Temper options Mill finish or other available surface finishes Minimum Order Quantity (MOQ) Production lead time Payment terms Please provide your quotation based on: CIF Jebel Ali Port, UAE (including sea freight), or alternatively provide both FOB China and CIF Jebel Ali Port, UAE prices. If available, please also send: Product catalogue Mill Test Certificate (MTC) sample Photos of the products and packaging. We are interested in establishing a long-term business relationship. Our initial purchase volume is expected to be 100+ metric tons, with the potential for larger and recurring orders if your pricing, quality, and service meet our requirements. Thank you for your time. We look forward to receiving your quotation and hope to build a successful long-term partnership. Best regards, Eng.Yousef

快速　竜 Said:
アルミハニカムパネルについてお聞きしたいのですが L1500×W700×厚みで曲げに対して200kgg耐えられるには厚みはどのくらいでしょうか ※簡単に言いますと約1000mmの側溝に渡して真ん中で200kg耐えられるかという事になります又、そのような製品があるようでしたらその重量、価格をおしえていただけますか現在はコンパネ板を使用してますが腐ると折れてしまい人が側溝に落ちてけがをしてます出来ましたらメールでお返事をいただけますか