Aluminum strip for transformer means that aluminum strip is used as conductive material in the high and low voltage windings of dry-type transformers and oil-immersed transformers.
Aluminum strip for transformer means that aluminum strip is used as conductive material in the high and low voltage windings of dry-type transformers and oil-immersed transformers.
The common thickness of transformer aluminum strip is 0.2-3.5mm, and the width is 10-1600mm. Normally, Huawei transformer aluminum strips are usually attached with blue plastic film and wrapped with kraft paper.
Aluminum Strip For Transformer
Aluminum strip for transformers is made of high-quality pure aluminum. It has the characteristics of high conductivity, soft texture, smooth surface and no burrs. It is an ideal material for the production of dry-type transformers and a key raw material for manufacturing transformer windings. It has good electrical conductivity to the aluminum strip. There are high requirements on many technical indicators such as rate, burr curling, side bending, and surface quality.
Since transformer aluminum strips have high requirements on the conductivity of the material and do not require strength, 1000 series aluminum alloy has become the best choice. Common alloys include 1050, 1060, 1070, and 1350.
| Alloy | Al | Si | Fe | Mg | Zn | Mn | Cu | Ti | Van |
| 1050 | ≥99.5 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.05 |
| 1060 | ≥99.6 | 0.25 | 0.35 | 0.03 | 0.05 | 0.03 | 0.05 | 0.03 | 0.05 |
| 1070 | ≥99.7 | 0.20 | 0.25 | 0.03 | 0.04 | 0.03 | 0.04 | 0.03 | 0.05 |
| 1350 | ≥99.5 | 0.10 | 0.40 | – | 0.05 | 0.01 | 0.05 | 0.02 | |
Aluminum strips for transformers have good elongation and tensile strength, and can fully meet conventional processing requirements (stamping, stretching) and high formability.
Industrial pure aluminum has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but its strength is low and heat treatment cannot enhance its machinability. It can be gas welded, hydrogen atomic welded and contact welded, but not easy to braze. It can easily withstand various Pressure processing and stretching and bending.
Transformer Structure
The temperature resistance level of the aluminum wire paint layer is between 180℃ and 220℃. When the welding problem is solved, the failure rate of transformers produced with aluminum will be smaller. Secondly, my country is rich in aluminum resources and the cost of aluminum wires is low. Production with aluminum The transformer costs less and is more competitive in the market.
| Usage | Aluminum strip and aluminum foil for dry-type transformers |
| Material | 1050-O, 1060-O, 1070-O, 1350-O |
| Thickness | 0.2mm–3.0mm, customize |
| Quality | Smooth surface, no scratches. The edges can be chamfered (rounded corners, rounded edges) without burrs, which is better than national standards. The resistivity is less than or equal to 0.028. |
| Packing | Wooden pallet, inner diameter 300mm or 500mm. |
First step: raw cloth slitting
Aluminum coil raw fabric with Slitting equipment made into the width clients needs
Transformer-Aluminum-Strip-Production
Second: Aluminum coil winding
So as tu make sure the first-class of aluminum coil,the side remedy is made at the gadget
Third: Aluminum coil constant
The detection width and thickness deviation of the aluminum coil are consistent with the technical requipments of the customer,add a paper sleeve to the scrolls and connect aluminum coil with glass fiber tape
We pay greater attention to great aid, supply scope, inspection, testing fashionable, cargo packing, after-sales service.
We have surpassed ISO9001 pleasant control gadget certification.
Aluminum Strip For Transformer
High-quality manage manner:
On the same time, we are able to help take pix and shoot motion pictures of aluminum strips for you in case you want. Each product will be absolutely and punctiliously examined earlier than packing and delivery.
Find durable and reliable 4x10 aluminum sheets for your needs. Explore our wide selection and order today.
5754 aluminum sheet has the characteristics of excellent processability, good corrosion resistance, weldability and easy forming. As a wrought alloy, 5754 aluminum sheet can be formed by rolling, extrusion, and forging, but not by casting.
Our embossed aluminum foil products are exported to more than 60 countries and regions in the European Union, the Middle East, Southeast Asia, and South America, and enjoy a good reputation in the international market with the best service and high-quality products.
1050 aluminum sheet is a kind of non-heat-treated aluminum plate, which has good plasticity, corrosion resistance, electrical conductivity and thermal conductivity after cold working;
3003 curtain wall aluminum sheet is the outer wall of a building. It is a lightweight wall of large high-rise buildings and has a certain decorative effect.
The properties of 3003 aluminum circle make it ideal for use in multiple markets including the cookware, automotive and lighting industries
No.52, Dongming Road, Zhengzhou, Henan, China
Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products
Mon – Sat, 8AM – 5PM
Sunday: Closed
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Latest Comments
Dear Sir, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99.50% MIN) SIZE:450 X32 X6 MM. DIN EN 570 EN-AW 1050 A, QUANTITY=3400KG
Hello, Would you be so kind to offer item as follows: Coil 0,6х1250 (1000)mm EN AW-3105 5tons
Hello, Can you offer me Aluminium plates? Actally I need: 110mm x 1700mm x 1700mm 5083 H111 - 21 pcs Next year planed is 177 pcs
Świetny artykuł. Byłem zachwycony, że wyszukałem ten artykuł. Wielu osobom wydaje się, że mają rzetelną wiedzę na ten temat, ale często tak nie jest. Stąd też moje miłe zaskoczenie. Jestem pod wrażeniem. Zdecydowanie będę rekomendował to miejsce i częściej wpadał, aby zobaczyć nowe rzeczy.
requirement of aluminium strip