5052 aluminum plate is widely used, with strong anti-rust and corrosion resistance

From blank production to product, ensure the production of all assembly lines, which can avoid scratches and ensure the quality of the surface of the board. Simultaneously, surfaces are inspected in several programs. If surface problems are found, it will not leave the factory, so the surface quality of our company’s 5052 aluminum plate is good. At the same time, in order to protect the surface, the aluminum plate is directly pasted on the production line.
5052 aluminum plate is widely used, has strong anti-rust and corrosion resistance, and is light in weight. The density of 5052 aluminum plate is 2.68, which is lower than other alloy series. The high-quality 5052 aluminum plate has good anodizing performance, and there will be no color difference on the surface after oxidation, and the texture is consistent. It is produced by imported rolling equipment, the surface is smooth and flawless, and the single mask leaves the factory without scratches.
5052 aluminum plate is a commonly used aluminum-magnesium alloy material, but many users do not know much about this series of products. Next, our sales staff will explain the specific situation of this series of aluminum sheets to you.

First: 5052 is a representative grade of 5 series aluminum alloy, and the product belongs to aluminum-magnesium alloy products. Then, according to the chemical composition, it can be seen that the magnesium alloy content of this product is between 2.2-2.8%, and the density is 2.68. Generally speaking, enterprises take an intermediate value in the processing process, that is, the content of magnesium alloy is 2.5%, so this series of aluminum plates can become almg2.5 again.

5052 aluminum plate

Second: H32 represents the processing state of the product. H can be understood as the state of incomplete annealing and work hardening, that is, after the product is annealed, the hardness is reduced and it is suitable for processing and forming. At the same time, in order to avoid the product hardness being too soft, proper processing and hardening are carried out. 32 means that after the product has been stabilized, the hardness is 1/4.
Hardness grade: Usually, the last Arabic numeral after H is directly related to the hardness value. For example, the last Arabic numeral of H32 H34 H24 H18 represents hardness. The larger the Arabic numerals in the aluminum plate of the same brand, the higher the hardness. For example, the hardness of H34 is higher than that of H32, and the O state is the softest state, which is more suitable as a tensile material. Arabic numerals are even numbers, 2468 industry terms are 1/4, 1/2.
To sum up, the 5052 H32 aluminum plate belongs to the aluminum-magnesium alloy with a magnesium alloy content of about 2.5%. After stabilization, it is in an incompletely annealed and hardened state with a hardness of 1/4. Generally speaking, this product has strong corrosion resistance, good surface oxidation effect and good bending ability. It is a typical sheet metal material, suitable for classic materials such as chassis and cabinets that require bending processing products.