Aluminum foil for hookah is commonly used for preparing and using a hookah, also known as a shisha or water pipe. It serves a specific purpose in the preparation of the hookah, particularly in the placement and management of the charcoal and tobacco.
Aluminum foil for hookah is commonly used for preparing and using a hookah, also known as a shisha or water pipe. It serves a specific purpose in the preparation of the hookah, particularly in the placement and management of the charcoal and tobacco.
Aluminum Foil For Hookah
Hookah is a tobacco product that originated in the Middle East. It is made of tobacco, honey or fruit and smoked through a hookah. According to relevant WHO documents, hookah is similar to cigarettes.
Hookah (Arabic: أرحيلة/نرحيلة/شيشة; English: hookah) is a tobacco product that uses a special tool “waterpipe” to filter water (or other liquids) and smoke it. It is mainly popular in the Middle East. The tobacco used is mixed with honey or various fruits, including apple, orange, pineapple, strawberry, and even coffee, chewing gum and cola flavors.
Hookah
Smoking bowl
Also known as a hookah butt, it is usually made of clay or marble and is used to hold coal and tobacco during smoking.
Hookah butts
Smoke tube
It is a long and thin hose with cigarette holders installed at both ends. The cigarette holders are usually made of metal or wood of various shapes and sizes.
Air hole
There are small beads inside the air adjustment hole. When you find it difficult to pump, you can adjust the tightness to control it. You can also remove the air hole cap and install another hose for use.
Cigarette bottle
Since water, juice, red wine, milk and other base ingredients are injected, ice can also be added (ice is added first and then water is added).
Cigarette tray
Place it at the lower end of the tobacco bowl to hold charcoal ash.
Rubber sleeve
There are three types of rubber sleeves for hookahs, namely bowl rubber sleeves, pipe rubber sleeves and bottle rubber sleeves, which help the contact between hookah components and increase the airtightness of the hookah.
Smoke diffusion cover
Placed at the bottom of the cigarette body, it is usually a mesh cover made of plastic, which has the effect of reducing the amount of smoke and lowering the temperature of the smoke.
Aluminum foil is typically used on the top part of the hookah, specifically on the bowl. It is placed over the bowl where the flavored tobacco, known as shisha, is packed. The aluminum foil serves as a barrier between the hot charcoal and the shisha, which is essential for heat management. It prevents the tobacco from burning too quickly or unevenly and helps ensure a better smoking experience. Small holes are made in the aluminum foil to control airflow and heat distribution, which affects the flavor and thickness of the smoke. So, in summary, aluminium foil for hookah is used on the bowl of the hookah to manage the heat and protect the shisha.
Structure of hookah used aluminum foil
| Alloy | 1235, 8011, 8021, 8079 |
| Thickness | 0.008mm(8micron) – 0.04mm (40micron) (tolerance:±5%) |
| Width and tolerance | 120- 1500 mm (tolerance:± 1.0mm) |
| Surface | One side matte, one side bright |
| Core material | Steel / aluminum / paper |
| Core ID | 76mm, 152mm (±0.5mm) |
| Packaging | Fumigation free wooden cases(keep us informed if any special requests) |
| Tensile Strength(Mpa) | 45-110MPa (according to thickness) |
| Surface wetting tension | ≥32dyne |
| Application | used in cooking, freezing, baking, and other food packaging, hookah |
Heat Management: Aluminum foil is placed on top of the hookah bowl, which contains the flavored tobacco mixture. It serves as a barrier between the hot charcoal and the tobacco. This is essential for managing the heat and preventing the tobacco from burning too quickly.
Charcoal Placement: Hot charcoal pieces are usually placed on top of the aluminum foil. This heats the tobacco, causing it to release flavored smoke that is then filtered through water in the base of the hookah and inhaled through the hose. The foil acts as a buffer to ensure the charcoal doesn’t come into direct contact with the tobacco.
Aluminum Foil jumbo roll
Airflow Control: Small holes are made in the aluminum foil to allow air to pass through. These holes are strategically placed to regulate the airflow and heat distribution, which in turn affects the flavor and thickness of the smoke.
Flavor Preservation: The use of aluminum foil helps preserve the flavor of the shisha tobacco by preventing it from burning too quickly or unevenly. Properly managing the heat is crucial for a good hookah-smoking experience.
Huawei Aluminum has been producing and selling aluminum foil for 22 years. It has advanced production equipment and skilled workers to ensure the quality of its products.
Aluminum Foil packaged
Our Aluminum Foil For Hookah Jumbo Rolls Manufactured to major international codes and standards including: Aluminum Institute, ASTM, EN and din.
We can also manufacture to other international standards including: ASME, SAE, AMS, AWS, FED, MIL, QQ, ISO, BS, AFNOR, JIS and GOST
5005 aluminum sheet is a medium-strength aluminum alloy plate, which can reach medium and high strength by cold working, and it has good formability
Our 3003 Aluminum foil products have been exported to Australia, Morocco, Syria, Kuwait, Turkey, Saudi Arabia, UAE, Iraq, Jordan, Germany, Poland, Spain, Brazil, etc. We sincerely welcome you to visit our factory.
1100 Aluminum Coil is the alloy with the highest commercial purity of all aluminum grades, with an aluminum content (mass fraction) of 99.00%. Its strength is relatively low, and it has excellent ductility, formability, weldability, and corrosion resistance.
5754 aluminum sheet has the characteristics of excellent processability, good corrosion resistance, weldability and easy forming. As a wrought alloy, 5754 aluminum sheet can be formed by rolling, extrusion, and forging, but not by casting.
5052 aluminum sheet is part of the 5000 series of aluminum. The grades in this series are alloyed with magnesium (2.5%) and have medium to high strength properties.
Brushed aluminum plate is a flat piece of aluminum material that has been treated with a brushing process to produce a uniform, unidirectional texture on its surface.
No.52, Dongming Road, Zhengzhou, Henan, China
Henan Huawei Aluminum Co., Ltd, One Of The Biggest Aluminum Supplier In China Henan,We Are Established In 2001,And We Have rich experience in import and export and high quality aluminum products
Mon – Sat, 8AM – 5PM
Sunday: Closed
© Copyright © 2023 Henan Huawei Aluminium Co., Ltd
Latest Comments
Dear Sir, Please offer your best FOB Prices specs are as under ALUMINIUM STRIP (AL=99.50% MIN) SIZE:450 X32 X6 MM. DIN EN 570 EN-AW 1050 A, QUANTITY=3400KG
Hello, Would you be so kind to offer item as follows: Coil 0,6х1250 (1000)mm EN AW-3105 5tons
Hello, Can you offer me Aluminium plates? Actally I need: 110mm x 1700mm x 1700mm 5083 H111 - 21 pcs Next year planed is 177 pcs
Świetny artykuł. Byłem zachwycony, że wyszukałem ten artykuł. Wielu osobom wydaje się, że mają rzetelną wiedzę na ten temat, ale często tak nie jest. Stąd też moje miłe zaskoczenie. Jestem pod wrażeniem. Zdecydowanie będę rekomendował to miejsce i częściej wpadał, aby zobaczyć nowe rzeczy.
requirement of aluminium strip